mahmood19227
/
SimulationCore2
1
0
Rozštěpit 0
Zdrojový kód Úkoly 0 Požadavky na natažení 0 Vydání 0 Wiki Aktivita
Procházet zdrojové kódy

TopDrive and Rotary Table is changed by Tarmigh

najafi
mahmood19227 před 1 rokem
rodič
815b3a8c0a
revize
e0184c4093
12 změnil soubory, kde provedl 320 přidání a 375 odebrání
Rozdělené zobrazení
Diff Options
Zobrazit statistiky Stáhněte soubor opravy Stáhněte rozdílový soubor
  1. +2
    -0
      .gitignore
  2. binární
     
  3. +1
    -2
      Equipments/Pumps/PumpsMain.f90
  4. +31
    -41
      Equipments/RotaryTable/RTable_OffMode.f90
  5. +13
    -12
      Equipments/RotaryTable/RTable_StartUp.f90
  6. +1
    -1
      Equipments/RotaryTable/RTable_VARIABLES.f90
  7. +24
    -159
      Equipments/RotaryTable/RotaryTableMain.f90
  8. +107
    -0
      Equipments/RotaryTable/Rtable_MainSolver.f90
  9. +21
    -125
      Equipments/TopDrive/TopDriveMain.f90
  10. +88
    -0
      Equipments/TopDrive/TopDrive_MainSolver.f90
  11. +30
    -35
      Equipments/TopDrive/TopDrive_OffMode.f90
  12. +2
    -0
      SimulationCore2.vfproj

+ 2
- 0
.gitignore Zobrazit soubor

@@ -5,3 +5,5 @@
/.vs/SimulationCore2/FileContentIndex
/.vs/SimulationCore2/v17
/.vs
/x64
*.rar

binární
Zobrazit soubor


+ 1
- 2
Equipments/Pumps/PumpsMain.f90 Zobrazit soubor

@@ -29,7 +29,7 @@ module PumpsMain
end subroutine
subroutine Pump1_Init
implicit none
Call Pump_StartUp
end subroutine Pump1_Init
subroutine Pump1_Step
@@ -51,7 +51,6 @@ module PumpsMain
integer,dimension(8) :: MP_START_TIME, MP_END_TIME
INTEGER :: MP_SolDuration
Call Pump_StartUp
loop1 : do


+ 31
- 41
Equipments/RotaryTable/RTable_OffMode.f90 Zobrazit soubor

@@ -13,7 +13,7 @@ subroutine RTable_OffMode
!==================================================================
! Rate limit for off Mode
Do while (((RTable%N_old-0.0d0)/RTable%time_step)>386.0d0)
if (((RTable%N_old-0.0d0)/RTable%time_step)>386.0d0) then
RTable%N_ref = (-386.0d0*RTable%time_step)+RTable%N_old
!else
! RTable%N_ref=0.0d0
@@ -31,51 +31,41 @@ subroutine RTable_OffMode
Call SetSoundRtGearCrash(RTable%SoundGearCrash)
end if
RT_OldTransMode = RTTransmissionLever
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
end if
if ((any(RTable%AssignmentSwitch==(/6,7,12/))) .or. (RTSwitch==0) .or. (IsStopped == .true.)) then
RTBLWR = 0
end if
Call sleepqq (80) !?????????????????
End Do
!==================================================================
else
RTable%N_ref = 0.
RTable%N_new = 0.
RTable%N_old = 0.
RTable%N_ref = 0.
RTable%N_new = 0.
RTable%N_old = 0.
RTable%ia = 0.
RTable%ia_old = 0.
RTable%ia_new = 0.
RTable%x = 0.
RTable%x_old = 0.
RTable%x_new = 0.
RTable%y = 0.
RTable%y_old = 0.
RTable%y_new = 0.
RTable%w = 0.
RTable%w_old = 0.
RTable%w_new = 0.
RTable%Speed = 0.
RT_wOld = 0.
Call Set_RotaryRPMGauge(sngl(1-RTable%RpmGaugeMalf)*real(RTable%Speed,8))
RTable%SoundRPM = INT(RTable%Speed)
Call SetSoundRT( RTable%SoundRPM )
!RotaryRPMGauge=RTable%Speed
!RPM=RotaryRPMGauge
RTable%Output_Current = 0.
RotaryTorqueGauge = ( ((RTable%J_coef+RTable%String_JCoef)*(((RTable%w_new/RTable%Conv_Ratio)-RT_wOld)/RTable%time_step))+(RTable%String_Torque) )*0.73756215 ![N.m]*0.73756215 = [ft.lbf]
RTable%Torque = ( ((RTable%J_coef+RTable%String_JCoef)*(((RTable%w_new/RTable%Conv_Ratio)-RT_wOld)/RTable%time_step))+(RTable%String_Torque) )*0.73756215 ![N.m]*0.73756215 = [ft.lbf]
Call Set_RotaryTorque(sngl(1-RTable%TorqueGaugeMalf)*real(RTable%Torque,8))
!RotaryTorqueGauge=(RTable%String_Torque)/12.
RTable%ia = 0.
RTable%ia_old = 0.
RTable%ia_new = 0.
RTable%x = 0.
RTable%x_old = 0.
RTable%x_new = 0.
RTable%y = 0.
RTable%y_old = 0.
RTable%y_new = 0.
RTable%w = 0.
RTable%w_old = 0.
RTable%w_new = 0.
RTable%Speed = 0.
RT_wOld = 0.
Call Set_RotaryRPMGauge(sngl(1-RTable%RpmGaugeMalf)*real(RTable%Speed,8))
RTable%SoundRPM = INT(RTable%Speed)
Call SetSoundRT( RTable%SoundRPM )
!RotaryRPMGauge=RTable%Speed
!RPM=RotaryRPMGauge
RTable%Output_Current = 0.
RotaryTorqueGauge = ( ((RTable%J_coef+RTable%String_JCoef)*(((RTable%w_new/RTable%Conv_Ratio)-RT_wOld)/RTable%time_step))+(RTable%String_Torque) )*0.73756215 ![N.m]*0.73756215 = [ft.lbf]
RTable%Torque = ( ((RTable%J_coef+RTable%String_JCoef)*(((RTable%w_new/RTable%Conv_Ratio)-RT_wOld)/RTable%time_step))+(RTable%String_Torque) )*0.73756215 ![N.m]*0.73756215 = [ft.lbf]
Call Set_RotaryTorque(sngl(1-RTable%TorqueGaugeMalf)*real(RTable%Torque,8))
!RotaryTorqueGauge=(RTable%String_Torque)/12.
end if
end subroutine RTable_OffMode

+ 13
- 12
Equipments/RotaryTable/RTable_StartUp.f90 Zobrazit soubor

@@ -9,23 +9,24 @@ subroutine RTable_StartUp
!RTable%=0.
RTable%Inertia_Moment = 23.261341 ! 23.261341 [kg.m^2] = 552 [lb.ft^2]
RTable%J_coef = RTable%Inertia_Moment+(1.*(RTable%Inertia_Moment)) ! [kg.m^2]???????????
RTable%String_JCoef = 0. !???????????????
RTable%Mech_Efficiency = 0.930
RTable%ConstLoad = 2000. ![lb.in]
RTable%ConstLoad = 0.112984829*RTable%ConstLoad ![N.m]
RTable%Torque = 0.0
RTable%Inertia_Moment = 23.261341e0 ! 23.261341 [kg.m^2] = 552 [lb.ft^2]
RTable%J_coef = RTable%Inertia_Moment+(1.e0*(RTable%Inertia_Moment)) ! [kg.m^2]???????????
RTable%String_JCoef = 0.e0 !???????????????
RTable%Mech_Efficiency = 0.93e0
!RTable%ConstLoad = 2000.e0 ![lb.in]
!RTable%ConstLoad = 0.112984829e0*RTable%ConstLoad ![N.m]
RTable%Torque = 0.0e0
RTable%High_Conv_Ratio = 4.8250
RTable%Low_Conv_Ratio = 7.310
RTable%High_Conv_Ratio = 4.825e0
RTable%Low_Conv_Ratio = 7.31e0
RTable%Conv_Ratio = RTable%Low_Conv_Ratio
RTable%time_step = .10
RTable%time_step = 0.1e0
RTable%w = 0.0
RTable%w_new = 0.0
RTable%w = 0.e0
RTable%w_new = 0.e0
RTable%K_throttle = 0


+ 1
- 1
Equipments/RotaryTable/RTable_VARIABLES.f90 Zobrazit soubor

@@ -17,7 +17,7 @@ MODULE RTable_VARIABLES
TYPE, PUBLIC :: RTable_Var
!***** RTable_VARIABLES *************************
INTEGER :: j , AssignmentSwitch
INTEGER :: j , AssignmentSwitch , K_throttle
INTEGER :: MotorFaileMalf , OverideTorqueLimitMalf , RpmGaugeMalf , TorqueGaugeMalf , TorqueLimitGaugeMalf
REAL :: Horsepower, Speed, Output_Current, Inertia_Moment, Mech_Efficiency, Torque


+ 24
- 159
Equipments/RotaryTable/RotaryTableMain.f90 Zobrazit soubor

@@ -3,31 +3,30 @@ module RotaryTableMain
public
contains
! subroutine RotaryTable_Setup()
! use CSimulationVariables
! implicit none
! call OnSimulationInitialization%Add(RotaryTable_Init)
! call OnSimulationStop%Add(RotaryTable_Init)
! call OnRotaryTableStep%Add(RotaryTable_Step)
! call OnRotaryTableOutput%Add(RotaryTable_Output)
! call OnRotaryTableMain%Add(RotaryTableMainBody)
! end subroutine
subroutine RotaryTable_Setup()
!use CSimulationVariables
!call OnSimulationInitialization%Add(RotaryTable_Init)
!call OnSimulationStop%Add(RotaryTable_Init)
!call OnRotaryTableStep%Add(RotaryTable_Step)
!call OnRotaryTableOutput%Add(RotaryTable_Output)
!call OnRotaryTableMain%Add(RotaryTableMainBody)
end subroutine
subroutine RotaryTable_Init
implicit none
Call RTable_StartUp
end subroutine RotaryTable_Init
subroutine RotaryTable_Step
subroutine RotaryTable_Step
implicit none
Call Rtable_MainSolver
end subroutine RotaryTable_Step
subroutine RotaryTable_Output
implicit none
end subroutine RotaryTable_Output
subroutine RotaryTableMainBody
use CDataDisplayConsoleVariables
use CDrillingConsoleVariables
use CSimulationVariables
@@ -44,161 +43,27 @@ module RotaryTableMain
Call RTable_StartUp
loopRtablestart : do
call sleepqq(10)
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
end if
if ( (any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch == -1) ) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
loopRtableswitch: do
CALL DATE_AND_TIME(values=RT_START_TIME)
IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ??????
RTable%N_new = RTThrottle
!===> Rotary Table Malfunction ----> Drive Motor Failure
call RTMalfunction_MotorFailure
if (((RTable%N_new-RTable%N_old)/RTable%time_step)>193.) then
RTable%N_ref = (193.*RTable%time_step)+RTable%N_old
else if (((RTable%N_old-RTable%N_new)/RTable%time_step)>193.) then
RTable%N_ref = (-193.*RTable%time_step)+RTable%N_old
else
RTable%N_ref = RTable%N_new
end if
CALL RTable_INPUTS
CALL RTable_Solver
RT_RPMUnityOutput = RotaryRPMGauge
RTable%N_old = RTable%N_ref
Else IF ( RTTransmissionLever==0) THEN !be in brake mode ??????
Call RTable_OffMode
RT_RPMUnityOutput = RotaryRPMGauge
End IF
RT_OldTransMode = RTTransmissionLever
CALL DATE_AND_TIME(values=RT_END_TIME)
RT_SolDuration = 100-(RT_END_TIME(5)*3600000+RT_END_TIME(6)*60000+RT_END_TIME(7)*1000+RT_END_TIME(8)-RT_START_TIME(5)*3600000-RT_START_TIME(6)*60000-RT_START_TIME(7)*1000-RT_START_TIME(8))
!print*, 'RTtime=', RT_SolDuration
if(RT_SolDuration > 0.0) then
CALL sleepqq(RT_SolDuration)
end if
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
end if
if ((any(RTable%AssignmentSwitch==(/6,7,12/))) .or. (RTSwitch/=-1) .or. (IsStopped == .true.)) then
RTable%SoundBlower = .false.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 0
Call RTable_OffMode
RT_RPMUnityOutput = RotaryRPMGauge
exit loopRtableswitch
end if
end do loopRtableswitch
else if ( (any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch == 1) .and. (RTThrottle==0.) ) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
loopRtableswitchREV: do
CALL DATE_AND_TIME(values=RT_START_TIME)
IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ??????
RTable%N_new = RTThrottle
!===> Rotary Table Malfunction ----> Drive Motor Failure
call RTMalfunction_MotorFailure
if (((RTable%N_new-RTable%N_old)/RTable%time_step)>193.) then
RTable%N_ref = (193.*RTable%time_step)+RTable%N_old
else if (((RTable%N_old-RTable%N_new)/RTable%time_step)>193.) then
RTable%N_ref = (-193.*RTable%time_step)+RTable%N_old
else
RTable%N_ref = RTable%N_new
end if
CALL RTable_INPUTS
CALL RTable_Solver
RT_RPMUnityOutput = -RotaryRPMGauge
RTable%N_old = RTable%N_ref
Else IF ( RTTransmissionLever==0) THEN !be in brake mode ??????
Call RTable_OffMode
RT_RPMUnityOutput = -RotaryRPMGauge
End IF
RT_OldTransMode = RTTransmissionLever
CALL DATE_AND_TIME(values=RT_END_TIME)
RT_SolDuration = 100-(RT_END_TIME(5)*3600000+RT_END_TIME(6)*60000+RT_END_TIME(7)*1000+RT_END_TIME(8)-RT_START_TIME(5)*3600000-RT_START_TIME(6)*60000-RT_START_TIME(7)*1000-RT_START_TIME(8))
!print*, 'RTtime=', RT_SolDuration
if(RT_SolDuration > 0.0) then
CALL sleepqq(RT_SolDuration)
end if
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
end if
if ((any(RTable%AssignmentSwitch==(/6,7,12/))) .or. (RTSwitch/=1) .or. (IsStopped == .true.)) then
RTable%SoundBlower = .false.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 0
Call RTable_OffMode
RT_RPMUnityOutput = -RotaryRPMGauge
exit loopRtableswitchREV
end if
CALL DATE_AND_TIME(values=RT_START_TIME)
Call Rtable_MainSolver
end do loopRtableswitchREV
else
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
if (IsStopped == .true.) then
exit loopRtablestart
end if
if((any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch /= 0)) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
else
RTable%SoundBlower = .false.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 0
CALL DATE_AND_TIME(values=RT_END_TIME)
RT_SolDuration = 100-(RT_END_TIME(5)*3600000+RT_END_TIME(6)*60000+RT_END_TIME(7)*1000+RT_END_TIME(8)-RT_START_TIME(5)*3600000-RT_START_TIME(6)*60000-RT_START_TIME(7)*1000-RT_START_TIME(8))
if(RT_SolDuration > 0.0) then
CALL sleepqq(RT_SolDuration)
end if
Call RTable_OffMode
RT_RPMUnityOutput = RotaryRPMGauge
!exit loopRtableswitch
RT_OldTransMode = RTTransmissionLever
end if
if (IsStopped == .true.) then
exit loopRtablestart
end if
end do loopRtablestart
end subroutine RotaryTableMainBody



end module RotaryTableMain

+ 107
- 0
Equipments/RotaryTable/Rtable_MainSolver.f90 Zobrazit soubor

@@ -0,0 +1,107 @@
subroutine Rtable_MainSolver
use CDataDisplayConsoleVariables
use CDrillingConsoleVariables
use CSimulationVariables
use RTable_VARIABLES
use CDrillWatchVariables
use CWarningsVariables
use CSounds
IMPLICIT NONE
if (IsPortable) then
RTable%AssignmentSwitch = 1
else
RTable%AssignmentSwitch = AssignmentSwitch
end if
if (RTThrottle<=0.e0) then
RTable%K_throttle = 1
end if
if ( (any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch == -1) .and. (IsStopped == .false.) ) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ??????
RTable%N_new = RTThrottle
!===> Rotary Table Malfunction ----> Drive Motor Failure
call RTMalfunction_MotorFailure
if (((RTable%N_new-RTable%N_old)/RTable%time_step)>193.) then
RTable%N_ref = (193.*RTable%time_step)+RTable%N_old
else if (((RTable%N_old-RTable%N_new)/RTable%time_step)>193.) then
RTable%N_ref = (-193.*RTable%time_step)+RTable%N_old
else
RTable%N_ref = RTable%N_new
end if
CALL RTable_INPUTS
CALL RTable_Solver
RT_RPMUnityOutput = RotaryRPMGauge
RTable%N_old = RTable%N_ref
Else IF ( RTTransmissionLever==0) THEN !be in brake mode ??????
Call RTable_OffMode
RT_RPMUnityOutput = RotaryRPMGauge
End IF
RT_OldTransMode = RTTransmissionLever
else if ( (any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch == 1) .and. (RTable%K_throttle==1) .and. (IsStopped == .false.) ) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ??????
RTable%N_new = RTThrottle
!===> Rotary Table Malfunction ----> Drive Motor Failure
call RTMalfunction_MotorFailure
if (((RTable%N_new-RTable%N_old)/RTable%time_step)>193.) then
RTable%N_ref = (193.*RTable%time_step)+RTable%N_old
else if (((RTable%N_old-RTable%N_new)/RTable%time_step)>193.) then
RTable%N_ref = (-193.*RTable%time_step)+RTable%N_old
else
RTable%N_ref = RTable%N_new
end if
CALL RTable_INPUTS
CALL RTable_Solver
RT_RPMUnityOutput = -RotaryRPMGauge
RTable%N_old = RTable%N_ref
Else IF ( RTTransmissionLever==0) THEN !be in brake mode ??????
Call RTable_OffMode
RT_RPMUnityOutput = -RotaryRPMGauge
End IF
RT_OldTransMode = RTTransmissionLever
else
if((any(RTable%AssignmentSwitch==(/1,2,3,4,5,8,9,10,11/))) .and. (RTSwitch /= 0) .and. (IsStopped == .false.) ) then
RTable%SoundBlower = .true.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 1
else
RTable%SoundBlower = .false.
Call SetSoundBlowerRT(RTable%SoundBlower)
RTBLWR = 0
end if
Call RTable_OffMode
RT_RPMUnityOutput = RotaryRPMGauge
RT_OldTransMode = RTTransmissionLever
RTable%K_throttle = 0
end if
END subroutine Rtable_MainSolver

+ 21
- 125
Equipments/TopDrive/TopDriveMain.f90 Zobrazit soubor

@@ -4,13 +4,14 @@ module TopDriveMain
public
contains
subroutine TopDrive_Setup()
use CSimulationVariables
implicit none
call OnSimulationStop%Add(TopDrive_Stop)
call OnTopDriveStart%Add(TopDrive_Start)
call OnTopDriveStep%Add(TopDrive_Step)
call OnTopDriveMain%Add(TopDriveMainBody)
subroutine TopDrive_Init()
!use CSimulationVariables
!implicit none
!call OnSimulationStop%Add(TopDrive_Stop)
!call OnTopDriveStart%Add(TopDrive_Start)
!call OnTopDriveStep%Add(TopDrive_Step)
!call OnTopDriveMain%Add(TopDriveMainBody)
Call TopDrive_StartUp
end subroutine
subroutine TopDrive_Stop
@@ -26,15 +27,11 @@ module TopDriveMain
subroutine TopDrive_Step
implicit none
call Log_4('TopDrive_Step')
end subroutine TopDrive_Step
Call Rtable_MainSolver
end subroutine TopDrive_Step
subroutine TopDriveMainBody
!use CDataDisplayConsoleVariables
!use CDrillingConsoleVariables
use CSimulationVariables
use TopDrive_VARIABLES
use CDrillWatchVariables
@@ -50,125 +47,24 @@ module TopDriveMain
call Log_4('TopDriveMainBody')
Call TopDrive_StartUp
loopTopDrivestart : do
call sleepqq(10)
!if ( (TopDriveTdsPowerState==-1) .and. (RpmKnob==0.) ) then !FWD
if ( (TopDriveTdsPowerState==-1) ) then !FWD
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
loopTopDriveswitchFWD: do
CALL DATE_AND_TIME(values=TDS_START_TIME)
!IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ????
TDS%N_new = (RpmKnob/250.d0)*965.d0 ! 0<RpmKnob<250 , 0<TDS%N_ref(truction motor)<965
!print*, 'TDSN=', RpmKnob , TDS%N_new
!===> Top Drive Malfunction ----> Drive Motor Failure
call TopDrive_Malfunction_MotorFailure
if (((TDS%N_new-TDS%N_old)/TDS%time_step)>193.) then
TDS%N_ref = (193.*TDS%time_step)+TDS%N_old
else if (((TDS%N_old-TDS%N_new)/TDS%time_step)>193.) then
TDS%N_ref = (-193.*TDS%time_step)+TDS%N_old
else
TDS%N_ref = TDS%N_new
end if
CALL TopDrive_INPUTS
CALL TopDrive_Solver
TDS%N_old = TDS%N_ref
if ( (TopDriveTdsPowerState/=-1) .or. (IsStopped == .true.) ) then
TDS%SoundBlower = .false.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 0
Call TopDrive_OffMode
exit loopTopDriveswitchFWD
end if
CALL DATE_AND_TIME(values=TDS_END_TIME)
TDS_SolDuration = 100-(TDS_END_TIME(5)*3600000+TDS_END_TIME(6)*60000+TDS_END_TIME(7)*1000+TDS_END_TIME(8)-TDS_START_TIME(5)*3600000-TDS_START_TIME(6)*60000-TDS_START_TIME(7)*1000-TDS_START_TIME(8))
!print*, 'TDStime=', TDS_SolDuration
if(TDS_SolDuration > 0.0) then
CALL sleepqq(TDS_SolDuration)
end if
end do loopTopDriveswitchFWD
!else if ( (TopDriveTdsPowerState==1) .and. (RpmKnob==0.) ) then !REV
else if ( (TopDriveTdsPowerState==1) ) then !REV
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
loopTopDrivestart : do
loopTopDriveswitchREV: do
CALL DATE_AND_TIME(values=TDS_START_TIME)
CALL DATE_AND_TIME(values=TDS_START_TIME)
TDS%N_new = (RpmKnob/250.d0)*965.d0
!===> Top Drive Malfunction ----> Drive Motor Failure
call TopDrive_Malfunction_MotorFailure
if (((TDS%N_new-TDS%N_old)/TDS%time_step)>193.) then
TDS%N_ref = (193.*TDS%time_step)+TDS%N_old
else if (((TDS%N_old-TDS%N_new)/TDS%time_step)>193.) then
TDS%N_ref = (-193.*TDS%time_step)+TDS%N_old
else
TDS%N_ref = TDS%N_new
end if
CALL TopDrive_INPUTS
CALL TopDrive_Solver
TDS%N_old = TDS%N_ref
if ( (TopDriveTdsPowerState/=1) .or. (IsStopped == .true.) ) then
TDS%SoundBlower = .false.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 0
Call TopDrive_OffMode
exit loopTopDriveswitchREV
end if
CALL DATE_AND_TIME(values=TDS_END_TIME)
TDS_SolDuration = 100-(TDS_END_TIME(5)*3600000+TDS_END_TIME(6)*60000+TDS_END_TIME(7)*1000+TDS_END_TIME(8)-TDS_START_TIME(5)*3600000-TDS_START_TIME(6)*60000-TDS_START_TIME(7)*1000-TDS_START_TIME(8))
!print*, 'TDStime=', TDS_SolDuration
if(TDS_SolDuration > 0.0) then
CALL sleepqq(TDS_SolDuration)
end if
Call TopDrive_MainSolver
end do loopTopDriveswitchREV
else
if( TopDriveTdsPowerState /= 0 ) then
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
else
TDS%SoundBlower = .false.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 0
if (IsStopped == .true.) then
exit loopTopDrivestart
end if
Call TopDrive_OffMode
!exit loopTopDriveswitchFWD
end if
CALL DATE_AND_TIME(values=TDS_END_TIME)
TDS_SolDuration = 100-(TDS_END_TIME(5)*3600000+TDS_END_TIME(6)*60000+TDS_END_TIME(7)*1000+TDS_END_TIME(8)-TDS_START_TIME(5)*3600000-TDS_START_TIME(6)*60000-TDS_START_TIME(7)*1000-TDS_START_TIME(8))
!print*, 'TDStime=', TDS_SolDuration
if(TDS_SolDuration > 0.0) then
CALL sleepqq(TDS_SolDuration)
end if
if (IsStopped == .true.) then
exit loopTopDrivestart
end if
end do loopTopDrivestart


+ 88
- 0
Equipments/TopDrive/TopDrive_MainSolver.f90 Zobrazit soubor

@@ -0,0 +1,88 @@
subroutine TopDrive_MainSolver
!use CDataDisplayConsoleVariables
!use CDrillingConsoleVariables
use CSimulationVariables
use TopDrive_VARIABLES
use CDrillWatchVariables
use CWarningsVariables
use CSounds
use CTopDrivePanelVariables
IMPLICIT NONE
!if ( (TopDriveTdsPowerState==-1) .and. (RpmKnob==0.) ) then !FWD
if ( (TopDriveTdsPowerState==-1) .and. (IsStopped == .false.) ) then !FWD
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
!IF ( RTTransmissionLever /=0 .and. RotaryGearsAbuse==0 ) THEN !be in clutch mode ????
TDS%N_new = (RpmKnob/250.d0)*965.d0 ! 0<RpmKnob<250 , 0<TDS%N_ref(truction motor)<965
!===> Top Drive Malfunction ----> Drive Motor Failure
call TopDrive_Malfunction_MotorFailure
if (((TDS%N_new-TDS%N_old)/TDS%time_step)>193.) then
TDS%N_ref = (193.*TDS%time_step)+TDS%N_old
else if (((TDS%N_old-TDS%N_new)/TDS%time_step)>193.) then
TDS%N_ref = (-193.*TDS%time_step)+TDS%N_old
else
TDS%N_ref = TDS%N_new
end if
CALL TopDrive_INPUTS
CALL TopDrive_Solver
TDS%N_old = TDS%N_ref
!else if ( (TopDriveTdsPowerState==1) .and. (RpmKnob==0.) ) then !REV
else if ( (TopDriveTdsPowerState==1) .and. (IsStopped == .false.) ) then !REV
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
TDS%N_new = (RpmKnob/250.d0)*965.d0
!===> Top Drive Malfunction ----> Drive Motor Failure
call TopDrive_Malfunction_MotorFailure
if (((TDS%N_new-TDS%N_old)/TDS%time_step)>193.) then
TDS%N_ref = (193.*TDS%time_step)+TDS%N_old
else if (((TDS%N_old-TDS%N_new)/TDS%time_step)>193.) then
TDS%N_ref = (-193.*TDS%time_step)+TDS%N_old
else
TDS%N_ref = TDS%N_new
end if
CALL TopDrive_INPUTS
CALL TopDrive_Solver
TDS%N_old = TDS%N_ref
else
if( (TopDriveTdsPowerState /= 0) .and. (IsStopped == .false.) ) then
TDS%SoundBlower = .true.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 1
else
TDS%SoundBlower = .false.
!Call SetSoundBlowerRT(TDS%SoundBlower)
TopDriveTdsPowerLed = 0
end if
Call TopDrive_OffMode
end if
end subroutine TopDrive_MainSolver

+ 30
- 35
Equipments/TopDrive/TopDrive_OffMode.f90 Zobrazit soubor

@@ -14,7 +14,7 @@ subroutine TopDrive_OffMode
!==================================================================
! Rate limit for off Mode
Do while ( ((TDS%N_old-0.0d0)/TDS%time_step)>386.0d0 )
if ( ((TDS%N_old-0.0d0)/TDS%time_step)>386.0d0 ) then
TDS%N_ref = (-386.0d0*TDS%time_step)+TDS%N_old
!else
! TDS%N_ref=0.0d0
@@ -32,49 +32,44 @@ subroutine TopDrive_OffMode
! Call SetSoundRtGearCrash(TDS%SoundGearCrash)
!end if
!TDS_OldTransMode = RTTransmissionLever
if ( (TopDriveTdsPowerState==0) .or. (IsStopped == .true.) ) then
TopDriveTdsPowerLed = 0
end if
Call sleepqq (80) !?????????????????
End Do
!==================================================================
else
TDS%N_ref = 0.
TDS%N_new = 0.
TDS%N_old = 0.
TDS%N_ref = 0.
TDS%N_new = 0.
TDS%N_old = 0.
TDS%ia = 0.
TDS%ia_old = 0.
TDS%ia_new = 0.
TDS%x = 0.
TDS%x_old = 0.
TDS%x_new = 0.
TDS%y = 0.
TDS%y_old = 0.
TDS%y_new = 0.
TDS%w = 0.
TDS%w_old = 0.
TDS%w_new = 0.
TDS%Speed = 0.
TDS_wOld = 0.
TDS%ia = 0.
TDS%ia_old = 0.
TDS%ia_new = 0.
TDS%x = 0.
TDS%x_old = 0.
TDS%x_new = 0.
TDS%y = 0.
TDS%y_old = 0.
TDS%y_new = 0.
TDS%w = 0.
TDS%w_old = 0.
TDS%w_new = 0.
TDS%Speed = 0.
TDS_wOld = 0.
TopDriveOperationFaultLed = 0
TDS%Speed = 0.d0 !Speed [RPM]
TopDriveRpmGauge = TDS%Speed
TD_RPMUnityOutput = -TopDriveRpmGauge
TDS%SoundRPM = 0
!Call SetSound( TDS%SoundRPM )
TDS%Torque = 0.d0 ![ft.lbf]
TopDriveTorqueGauge = 0.d0 ![ft.lbf]
TDS_OldPowerMode = 1
TDS_OldPowerMode = 0
TopDriveOperationFaultLed = 0
TDS%Speed = 0.d0 !Speed [RPM]
TopDriveRpmGauge = TDS%Speed
TD_RPMUnityOutput = -TopDriveRpmGauge
TDS%SoundRPM = 0
!Call SetSound( TDS%SoundRPM )
TDS%Torque = 0.d0 ![ft.lbf]
TopDriveTorqueGauge = 0.d0 ![ft.lbf]
TDS_OldPowerMode = 1
TDS_OldPowerMode = 0
End if
end subroutine

+ 2
- 0
SimulationCore2.vfproj Zobrazit soubor

@@ -397,6 +397,7 @@
<File RelativePath=".\Equipments\RotaryTable\RotaryTableMain.f90"/>
<File RelativePath=".\Equipments\RotaryTable\RTable_diff_eqs.f90"/>
<File RelativePath=".\Equipments\RotaryTable\RTable_INPUTS.f90"/>
<File RelativePath=".\Equipments\RotaryTable\Rtable_MainSolver.f90"/>
<File RelativePath=".\Equipments\RotaryTable\RTable_OffMode.f90"/>
<File RelativePath=".\Equipments\RotaryTable\RTable_Solver.f90"/>
<File RelativePath=".\Equipments\RotaryTable\RTable_StartUp.f90"/>
@@ -407,6 +408,7 @@
<Filter Name="TopDrive">
<File RelativePath=".\Equipments\TopDrive\TopDrive_diff_eqs.f90"/>
<File RelativePath=".\Equipments\TopDrive\TopDrive_INPUTS.f90"/>
<File RelativePath=".\Equipments\TopDrive\TopDrive_MainSolver.f90"/>
<File RelativePath=".\Equipments\TopDrive\TopDrive_Malfunction_MotorFailure.f90"/>
<File RelativePath=".\Equipments\TopDrive\TopDrive_OffMode.f90"/>
<File RelativePath=".\Equipments\TopDrive\TopDrive_Solver.f90"/>


Zapsat Náhled
Načítá se…
Zrušit
Uložit