SimulationCore2/CSharp/Problems/CGaugesProblemsVariables.f90

module CGaugesProblemsVariables
    use CProblemDifinition
	implicit none    
	public 
    
    type(CProblem) :: WeightIndicator
    type(CProblem) :: RotaryRpm
    type(CProblem) :: RotaryTorque
    type(CProblem) :: StandPipePressure
    type(CProblem) :: CasingPressure
    type(CProblem) :: Pump1Strokes
    type(CProblem) :: Pump2Strokes
    type(CProblem) :: ReturnLineTemperature
    type(CProblem) :: TripTank
    type(CProblem) :: PitGainLoss
    type(CProblem) :: MudTankVolume
    type(CProblem) :: ReturnMudFlow    
    type(CProblem) :: TorqueLimit
    type(CProblem) :: PowerLimit
    type(CProblem) :: AccumulatorPressure
    type(CProblem) :: ManifoldPressure
    type(CProblem) :: AnnularPressure
    type(CProblem) :: RigAirPressure
    type(CProblem) :: StandPipe1
    type(CProblem) :: StandPipe2
    type(CProblem) :: DrillPipePressure
    type(CProblem) :: ChokePosition
    type(CProblem) :: CasingPressure2

    
    
    
    procedure (ActionInteger), pointer :: WeightIndicatorPtr
    procedure (ActionInteger), pointer :: RotaryRpmPtr
    procedure (ActionInteger), pointer :: RotaryTorquePtr
    procedure (ActionInteger), pointer :: StandPipePressurePtr
    procedure (ActionInteger), pointer :: CasingPressurePtr
    procedure (ActionInteger), pointer :: Pump1StrokesPtr
    procedure (ActionInteger), pointer :: Pump2StrokesPtr
    procedure (ActionInteger), pointer :: ReturnLineTemperaturePtr
    procedure (ActionInteger), pointer :: TripTankPtr
    procedure (ActionInteger), pointer :: PitGainLossPtr
    procedure (ActionInteger), pointer :: MudTankVolumePtr
    procedure (ActionInteger), pointer :: ReturnMudFlowPtr
    procedure (ActionInteger), pointer :: TorqueLimitPtr
    procedure (ActionInteger), pointer :: PowerLimitPtr
    procedure (ActionInteger), pointer :: AccumulatorPressurePtr
    procedure (ActionInteger), pointer :: ManifoldPressurePtr
    procedure (ActionInteger), pointer :: AnnularPressurePtr
    procedure (ActionInteger), pointer :: RigAirPressurePtr
    procedure (ActionInteger), pointer :: StandPipe1Ptr
    procedure (ActionInteger), pointer :: StandPipe2Ptr
    procedure (ActionInteger), pointer :: DrillPipePressurePtr
    procedure (ActionInteger), pointer :: ChokePositionPtr
    procedure (ActionInteger), pointer :: CasingPressure2Ptr

    
    contains 
    
    subroutine ProcessGaugesProblemsDueTime(time)
        implicit none
        integer :: time
        if(WeightIndicator%ProblemType == Time_ProblemType) call ProcessDueTime(WeightIndicator, ChangeWeightIndicator, time)
        if(RotaryRpm%ProblemType == Time_ProblemType) call ProcessDueTime(RotaryRpm, ChangeRotaryRpm, time)
        if(RotaryTorque%ProblemType == Time_ProblemType) call ProcessDueTime(RotaryTorque, ChangeRotaryTorque, time)
        if(StandPipePressure%ProblemType == Time_ProblemType) call ProcessDueTime(StandPipePressure, ChangeStandPipePressure, time)
        if(CasingPressure%ProblemType == Time_ProblemType) call ProcessDueTime(CasingPressure, ChangeCasingPressure, time)
        if(Pump1Strokes%ProblemType == Time_ProblemType) call ProcessDueTime(Pump1Strokes, ChangePump1Strokes, time)
        if(Pump2Strokes%ProblemType == Time_ProblemType) call ProcessDueTime(Pump2Strokes, ChangePump2Strokes, time)
        if(ReturnLineTemperature%ProblemType == Time_ProblemType) call ProcessDueTime(ReturnLineTemperature, ChangeReturnLineTemperature, time)
        if(TripTank%ProblemType == Time_ProblemType) call ProcessDueTime(TripTank, ChangeTripTank, time)
        if(PitGainLoss%ProblemType == Time_ProblemType) call ProcessDueTime(PitGainLoss, ChangePitGainLoss, time)
        if(MudTankVolume%ProblemType == Time_ProblemType) call ProcessDueTime(MudTankVolume, ChangeMudTankVolume, time)
        if(ReturnMudFlow%ProblemType == Time_ProblemType) call ProcessDueTime(ReturnMudFlow, ChangeReturnMudFlow, time)
        if(TorqueLimit%ProblemType == Time_ProblemType) call ProcessDueTime(TorqueLimit, ChangeTorqueLimit, time)
        if(PowerLimit%ProblemType == Time_ProblemType) call ProcessDueTime(PowerLimit, ChangePowerLimit, time)
        if(AccumulatorPressure%ProblemType == Time_ProblemType) call ProcessDueTime(AccumulatorPressure, ChangeAccumulatorPressure, time)
        if(ManifoldPressure%ProblemType == Time_ProblemType) call ProcessDueTime(ManifoldPressure, ChangeManifoldPressure, time)
        if(AnnularPressure%ProblemType == Time_ProblemType) call ProcessDueTime(AnnularPressure, ChangeAnnularPressure, time)
        if(RigAirPressure%ProblemType == Time_ProblemType) call ProcessDueTime(RigAirPressure, ChangeRigAirPressure, time)
        if(StandPipe1%ProblemType == Time_ProblemType) call ProcessDueTime(StandPipe1, ChangeStandPipe1, time)
        if(StandPipe2%ProblemType == Time_ProblemType) call ProcessDueTime(StandPipe2, ChangeStandPipe2, time)
        if(DrillPipePressure%ProblemType == Time_ProblemType) call ProcessDueTime(DrillPipePressure, ChangeDrillPipePressure, time)
        if(ChokePosition%ProblemType == Time_ProblemType) call ProcessDueTime(ChokePosition, ChangeChokePosition, time)
        if(CasingPressure2%ProblemType == Time_ProblemType) call ProcessDueTime(CasingPressure2, ChangeCasingPressure2, time)
    end subroutine
	
	subroutine ProcessGaugesProblemsDuePumpStrokes(strokes)
        implicit none
        integer :: strokes
        if(WeightIndicator%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(WeightIndicator, ChangeWeightIndicator, strokes)
        if(RotaryRpm%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(RotaryRpm, ChangeRotaryRpm, strokes)
        if(RotaryTorque%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(RotaryTorque, ChangeRotaryTorque, strokes)
        if(StandPipePressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(StandPipePressure, ChangeStandPipePressure, strokes)
        if(CasingPressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(CasingPressure, ChangeCasingPressure, strokes)
        if(Pump1Strokes%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(Pump1Strokes, ChangePump1Strokes, strokes)
        if(Pump2Strokes%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(Pump2Strokes, ChangePump2Strokes, strokes)
        if(ReturnLineTemperature%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(ReturnLineTemperature, ChangeReturnLineTemperature, strokes)
        if(TripTank%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(TripTank, ChangeTripTank, strokes)
        if(PitGainLoss%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(PitGainLoss, ChangePitGainLoss, strokes)
        if(MudTankVolume%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(MudTankVolume, ChangeMudTankVolume, strokes)
        if(ReturnMudFlow%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(ReturnMudFlow, ChangeReturnMudFlow, strokes)
        if(TorqueLimit%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(TorqueLimit, ChangeTorqueLimit, strokes)
        if(PowerLimit%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(PowerLimit, ChangePowerLimit, strokes)
        if(AccumulatorPressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(AccumulatorPressure, ChangeAccumulatorPressure, strokes)
        if(ManifoldPressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(ManifoldPressure, ChangeManifoldPressure, strokes)
        if(AnnularPressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(AnnularPressure, ChangeAnnularPressure, strokes)
        if(RigAirPressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(RigAirPressure, ChangeRigAirPressure, strokes)
        if(StandPipe1%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(StandPipe1, ChangeStandPipe1, strokes)
        if(StandPipe2%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(StandPipe2, ChangeStandPipe2, strokes)
        if(DrillPipePressure%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(DrillPipePressure, ChangeDrillPipePressure, strokes)
        if(ChokePosition%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(ChokePosition, ChangeChokePosition, strokes)
        if(CasingPressure2%ProblemType == PumpStrokes_ProblemType) call ProcessDuePumpStrokes(CasingPressure2, ChangeCasingPressure2, strokes)
    end subroutine
	
	subroutine ProcessGaugesProblemsDueVolumePumped(volume)
        implicit none
        real(8) :: volume
        if(WeightIndicator%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(WeightIndicator, ChangeWeightIndicator, volume)
        if(RotaryRpm%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(RotaryRpm, ChangeRotaryRpm, volume)
        if(RotaryTorque%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(RotaryTorque, ChangeRotaryTorque, volume)
        if(StandPipePressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(StandPipePressure, ChangeStandPipePressure, volume)
        if(CasingPressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(CasingPressure, ChangeCasingPressure, volume)
        if(Pump1Strokes%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(Pump1Strokes, ChangePump1Strokes, volume)
        if(Pump2Strokes%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(Pump2Strokes, ChangePump2Strokes, volume)
        if(ReturnLineTemperature%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(ReturnLineTemperature, ChangeReturnLineTemperature, volume)
        if(TripTank%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(TripTank, ChangeTripTank, volume)
        if(PitGainLoss%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(PitGainLoss, ChangePitGainLoss, volume)
        if(MudTankVolume%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(MudTankVolume, ChangeMudTankVolume, volume)
        if(ReturnMudFlow%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(ReturnMudFlow, ChangeReturnMudFlow, volume)
        if(TorqueLimit%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(TorqueLimit, ChangeTorqueLimit, volume)
        if(PowerLimit%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(PowerLimit, ChangePowerLimit, volume)
        if(AccumulatorPressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(AccumulatorPressure, ChangeAccumulatorPressure, volume)
        if(ManifoldPressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(ManifoldPressure, ChangeManifoldPressure, volume)
        if(AnnularPressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(AnnularPressure, ChangeAnnularPressure, volume)
        if(RigAirPressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(RigAirPressure, ChangeRigAirPressure, volume)
        if(StandPipe1%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(StandPipe1, ChangeStandPipe1, volume)
        if(StandPipe2%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(StandPipe2, ChangeStandPipe2, volume)
        if(DrillPipePressure%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(DrillPipePressure, ChangeDrillPipePressure, volume)
        if(ChokePosition%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(ChokePosition, ChangeChokePosition, volume)
        if(CasingPressure2%ProblemType == VolumePumped_ProblemType) call ProcessDueVolumePumped(CasingPressure2, ChangeCasingPressure2, volume)
    end subroutine
	
	subroutine ProcessGaugesProblemsDueDistanceDrilled(distance)
        implicit none
        real(8) :: distance
        if(WeightIndicator%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(WeightIndicator, ChangeWeightIndicator, distance)
        if(RotaryRpm%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(RotaryRpm, ChangeRotaryRpm, distance)
        if(RotaryTorque%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(RotaryTorque, ChangeRotaryTorque, distance)
        if(StandPipePressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(StandPipePressure, ChangeStandPipePressure, distance)
        if(CasingPressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(CasingPressure, ChangeCasingPressure, distance)
        if(Pump1Strokes%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(Pump1Strokes, ChangePump1Strokes, distance)
        if(Pump2Strokes%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(Pump2Strokes, ChangePump2Strokes, distance)
        if(ReturnLineTemperature%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(ReturnLineTemperature, ChangeReturnLineTemperature, distance)
        if(TripTank%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(TripTank, ChangeTripTank, distance)
        if(PitGainLoss%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(PitGainLoss, ChangePitGainLoss, distance)
        if(MudTankVolume%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(MudTankVolume, ChangeMudTankVolume, distance)
        if(ReturnMudFlow%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(ReturnMudFlow, ChangeReturnMudFlow, distance)
        if(TorqueLimit%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(TorqueLimit, ChangeTorqueLimit, distance)
        if(PowerLimit%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(PowerLimit, ChangePowerLimit, distance)
        if(AccumulatorPressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(AccumulatorPressure, ChangeAccumulatorPressure, distance)
        if(ManifoldPressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(ManifoldPressure, ChangeManifoldPressure, distance)
        if(AnnularPressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(AnnularPressure, ChangeAnnularPressure, distance)
        if(RigAirPressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(RigAirPressure, ChangeRigAirPressure, distance)
        if(StandPipe1%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(StandPipe1, ChangeStandPipe1, distance)
        if(StandPipe2%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(StandPipe2, ChangeStandPipe2, distance)
        if(DrillPipePressure%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(DrillPipePressure, ChangeDrillPipePressure, distance)
        if(ChokePosition%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(ChokePosition, ChangeChokePosition, distance)
        if(CasingPressure2%ProblemType == DistanceDrilled_ProblemType) call ProcessDueDistanceDrilled(CasingPressure2, ChangeCasingPressure2, distance)
    end subroutine
	
	
	
	
	
	
	
    
    
    subroutine ChangeWeightIndicator(status)
        use TD_GeneralData
        implicit none
        integer, intent (in) :: status
        if(associated(WeightIndicatorPtr)) call WeightIndicatorPtr(status)
        if(status == Clear_StatusType)    TD_WeightIndicatorMalf = 0
        if(status == Executed_StatusType) TD_WeightIndicatorMalf = 1
    endsubroutine
    
    subroutine ChangeRotaryRpm(status)
        use RTable_VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(RotaryRpmPtr)) call RotaryRpmPtr(status)
        if(status == Clear_StatusType)    RTable%RpmGaugeMalf = 0
        if(status == Executed_StatusType) RTable%RpmGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeRotaryTorque(status)
        use RTable_VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(RotaryTorquePtr)) call RotaryTorquePtr(status)
        if(status == Clear_StatusType)    RTable%TorqueGaugeMalf = 0
        if(status == Executed_StatusType) RTable%TorqueGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeStandPipePressure(status)
        use MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(StandPipePressurePtr)) call StandPipePressurePtr(status)
        if(status == Clear_StatusType) StandPipePressure_DataDisplayMalf = 0
        if(status == Executed_StatusType) StandPipePressure_DataDisplayMalf = 1
    endsubroutine
    
    subroutine ChangeCasingPressure(status)
        USE FricPressDropVars
        implicit none
        integer, intent (in) :: status
        if(associated(CasingPressurePtr)) call CasingPressurePtr(status)
        if(status == Clear_StatusType) CasingPressure_DataDisplayMalF = 0
        if(status == Executed_StatusType) CasingPressure_DataDisplayMalF = 1
    endsubroutine
    
    subroutine ChangePump1Strokes(status)
        use Pumps_VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(Pump1StrokesPtr)) call Pump1StrokesPtr(status)
        if(status == Clear_StatusType)    PUMP(1)%SPMGaugeMalf = 0
        if(status == Executed_StatusType) PUMP(1)%SPMGaugeMalf = 1
    endsubroutine
    
    subroutine ChangePump2Strokes(status)
        use Pumps_VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(Pump2StrokesPtr)) call Pump2StrokesPtr(status)
        if(status == Clear_StatusType)    PUMP(2)%SPMGaugeMalf = 0
        if(status == Executed_StatusType) PUMP(2)%SPMGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeReturnLineTemperature(status)
        implicit none
        integer, intent (in) :: status
        if(associated(ReturnLineTemperaturePtr)) call ReturnLineTemperaturePtr(status)
        !if(status == Clear_StatusType) print*,'On_ReturnLineTemperature_Clear'
        !if(status == Executed_StatusType) print*,'On_ReturnLineTemperature_Execute'
    endsubroutine
    
    subroutine ChangeTripTank(status)
        USE MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(TripTankPtr)) call TripTankPtr(status)
        if(status == Clear_StatusType) TripTankPressure_DataDisplayMalf = 0
        if(status == Executed_StatusType) TripTankPressure_DataDisplayMalf = 1
    endsubroutine
    
    subroutine ChangePitGainLoss(status)
        USE MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(PitGainLossPtr)) call PitGainLossPtr(status)
        if(status == Clear_StatusType) PitGainLossGaugeMalf = 0
        if(status == Executed_StatusType) PitGainLossGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeMudTankVolume(status)
        implicit none
        integer, intent (in) :: status
        if(associated(MudTankVolumePtr)) call MudTankVolumePtr(status)
        !if(status == Clear_StatusType) print*,'On_MudTankVolume_Clear'
        !if(status == Executed_StatusType) print*,'On_MudTankVolume_Execute'
    endsubroutine
    
    subroutine ChangeReturnMudFlow(status)
        implicit none
        integer, intent (in) :: status
        if(associated(ReturnMudFlowPtr)) call ReturnMudFlowPtr(status)
        !if(status == Clear_StatusType) print*,'On_ReturnMudFlow_Clear'
        !if(status == Executed_StatusType) print*,'On_ReturnMudFlow_Execute'
    endsubroutine
    
    subroutine ChangeTorqueLimit(status)
        use RTable_VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(TorqueLimitPtr)) call TorqueLimitPtr(status)
        if(status == Clear_StatusType)    RTable%TorqueLimitGaugeMalf = 0
        if(status == Executed_StatusType) RTable%TorqueLimitGaugeMalf = 1
    endsubroutine
    
    subroutine ChangePowerLimit(status)
        implicit none
        integer, intent (in) :: status
        if(associated(PowerLimitPtr)) call PowerLimitPtr(status)
        !if(status == Clear_StatusType) print*,'On_PowerLimit_Clear'
        !if(status == Executed_StatusType) print*,'On_PowerLimit_Execute'
    endsubroutine
    
    subroutine ChangeAccumulatorPressure(status)
        USE VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(AccumulatorPressurePtr)) call AccumulatorPressurePtr(status)
        if(status == Clear_StatusType) AccumulatorPressureGaugeMalf = 0
        if(status == Executed_StatusType) AccumulatorPressureGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeManifoldPressure(status)
        USE VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(ManifoldPressurePtr)) call ManifoldPressurePtr(status)
        if(status == Clear_StatusType) ManifoldPressureGaugeMalf = 0
        if(status == Executed_StatusType) ManifoldPressureGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeAnnularPressure(status)
        USE VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(AnnularPressurePtr)) call AnnularPressurePtr(status)
        if(status == Clear_StatusType) AnnularPressureGaugeMalf = 0
        if(status == Executed_StatusType) AnnularPressureGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeRigAirPressure(status)
        USE VARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(RigAirPressurePtr)) call RigAirPressurePtr(status)
        if(status == Clear_StatusType) AirSupplyPressureGaugeMalf = 0
        if(status == Executed_StatusType) AirSupplyPressureGaugeMalf = 1
    endsubroutine
    
    subroutine ChangeStandPipe1(status)
        use MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(StandPipe1Ptr)) call StandPipe1Ptr(status)
        if(status == Clear_StatusType)          StandPipeGauge1Malf = 0
        if(status == Executed_StatusType)       StandPipeGauge1Malf = 1
    endsubroutine
    
    subroutine ChangeStandPipe2(status)
        use MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(StandPipe2Ptr)) call StandPipe2Ptr(status)
        if(status == Clear_StatusType)          StandPipeGauge2Malf = 0
        if(status == Executed_StatusType)       StandPipeGauge2Malf = 1
    endsubroutine
    
    subroutine ChangeDrillPipePressure(status)
        use MudSystemVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(DrillPipePressurePtr)) call DrillPipePressurePtr(status)
        if(status == Clear_StatusType)         DrillPipePressureMalf = 0
        if(status == Executed_StatusType)      DrillPipePressureMalf = 1
    endsubroutine
    
    subroutine ChangeChokePosition(status)
        USE CHOKEVARIABLES
        implicit none
        integer, intent (in) :: status
        if(associated(ChokePositionPtr)) call ChokePositionPtr(status)
        if(status == Clear_StatusType) GaugeChokePositionMailf = 0
        if(status == Executed_StatusType) GaugeChokePositionMailf = 1
    endsubroutine
    
    subroutine ChangeCasingPressure2(status)
        use FricPressDropVars
        implicit none
        integer, intent (in) :: status
        if(associated(CasingPressure2Ptr)) call CasingPressure2Ptr(status)
        if(status == Clear_StatusType)          CasingPressure_ChokeMalF = 0
        if(status == Executed_StatusType)       CasingPressure_ChokeMalF = 1
    endsubroutine
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    subroutine SubscribeWeightIndicator(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeWeightIndicator
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeWeightIndicator' :: SubscribeWeightIndicator
	    implicit none
	    procedure (ActionInteger) :: v
	    WeightIndicatorPtr => v
    end subroutine

    subroutine SubscribeRotaryRpm(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeRotaryRpm
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeRotaryRpm' :: SubscribeRotaryRpm
	    implicit none
	    procedure (ActionInteger) :: v
	    RotaryRpmPtr => v
    end subroutine

    subroutine SubscribeRotaryTorque(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeRotaryTorque
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeRotaryTorque' :: SubscribeRotaryTorque
	    implicit none
	    procedure (ActionInteger) :: v
	    RotaryTorquePtr => v
    end subroutine

    subroutine SubscribeStandPipePressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeStandPipePressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeStandPipePressure' :: SubscribeStandPipePressure
	    implicit none
	    procedure (ActionInteger) :: v
	    StandPipePressurePtr => v
    end subroutine

    subroutine SubscribeCasingPressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeCasingPressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeCasingPressure' :: SubscribeCasingPressure
	    implicit none
	    procedure (ActionInteger) :: v
	    CasingPressurePtr => v
    end subroutine

    subroutine SubscribePump1Strokes(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribePump1Strokes
    !DEC$ ATTRIBUTES ALIAS: 'SubscribePump1Strokes' :: SubscribePump1Strokes
	    implicit none
	    procedure (ActionInteger) :: v
	    Pump1StrokesPtr => v
    end subroutine

    subroutine SubscribePump2Strokes(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribePump2Strokes
    !DEC$ ATTRIBUTES ALIAS: 'SubscribePump2Strokes' :: SubscribePump2Strokes
	    implicit none
	    procedure (ActionInteger) :: v
	    Pump2StrokesPtr => v
    end subroutine

    subroutine SubscribeReturnLineTemperature(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeReturnLineTemperature
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeReturnLineTemperature' :: SubscribeReturnLineTemperature
	    implicit none
	    procedure (ActionInteger) :: v
	    ReturnLineTemperaturePtr => v
    end subroutine

    subroutine SubscribeTripTank(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeTripTank
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeTripTank' :: SubscribeTripTank
	    implicit none
	    procedure (ActionInteger) :: v
	    TripTankPtr => v
    end subroutine

    subroutine SubscribePitGainLoss(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribePitGainLoss
    !DEC$ ATTRIBUTES ALIAS: 'SubscribePitGainLoss' :: SubscribePitGainLoss
	    implicit none
	    procedure (ActionInteger) :: v
	    PitGainLossPtr => v
    end subroutine

    subroutine SubscribeMudTankVolume(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeMudTankVolume
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeMudTankVolume' :: SubscribeMudTankVolume
	    implicit none
	    procedure (ActionInteger) :: v
	    MudTankVolumePtr => v
    end subroutine

    subroutine SubscribeReturnMudFlow(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeReturnMudFlow
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeReturnMudFlow' :: SubscribeReturnMudFlow
	    implicit none
	    procedure (ActionInteger) :: v
	    ReturnMudFlowPtr => v
    end subroutine

    subroutine SubscribeTorqueLimit(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeTorqueLimit
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeTorqueLimit' :: SubscribeTorqueLimit
	    implicit none
	    procedure (ActionInteger) :: v
	    TorqueLimitPtr => v
    end subroutine

    subroutine SubscribePowerLimit(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribePowerLimit
    !DEC$ ATTRIBUTES ALIAS: 'SubscribePowerLimit' :: SubscribePowerLimit
	    implicit none
	    procedure (ActionInteger) :: v
	    PowerLimitPtr => v
    end subroutine

    subroutine SubscribeAccumulatorPressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeAccumulatorPressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeAccumulatorPressure' :: SubscribeAccumulatorPressure
	    implicit none
	    procedure (ActionInteger) :: v
	    AccumulatorPressurePtr => v
    end subroutine

    subroutine SubscribeManifoldPressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeManifoldPressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeManifoldPressure' :: SubscribeManifoldPressure
	    implicit none
	    procedure (ActionInteger) :: v
	    ManifoldPressurePtr => v
    end subroutine

    subroutine SubscribeAnnularPressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeAnnularPressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeAnnularPressure' :: SubscribeAnnularPressure
	    implicit none
	    procedure (ActionInteger) :: v
	    AnnularPressurePtr => v
    end subroutine

    subroutine SubscribeRigAirPressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeRigAirPressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeRigAirPressure' :: SubscribeRigAirPressure
	    implicit none
	    procedure (ActionInteger) :: v
	    RigAirPressurePtr => v
    end subroutine

    subroutine SubscribeStandPipe1(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeStandPipe1
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeStandPipe1' :: SubscribeStandPipe1
	    implicit none
	    procedure (ActionInteger) :: v
	    StandPipe1Ptr => v
    end subroutine

    subroutine SubscribeStandPipe2(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeStandPipe2
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeStandPipe2' :: SubscribeStandPipe2
	    implicit none
	    procedure (ActionInteger) :: v
	    StandPipe2Ptr => v
    end subroutine

    subroutine SubscribeDrillPipePressure(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeDrillPipePressure
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeDrillPipePressure' :: SubscribeDrillPipePressure
	    implicit none
	    procedure (ActionInteger) :: v
	    DrillPipePressurePtr => v
    end subroutine

    subroutine SubscribeChokePosition(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeChokePosition
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeChokePosition' :: SubscribeChokePosition
	    implicit none
	    procedure (ActionInteger) :: v
	    ChokePositionPtr => v
    end subroutine

    subroutine SubscribeCasingPressure2(v)
    !DEC$ ATTRIBUTES DLLEXPORT :: SubscribeCasingPressure2
    !DEC$ ATTRIBUTES ALIAS: 'SubscribeCasingPressure2' :: SubscribeCasingPressure2
	    implicit none
	    procedure (ActionInteger) :: v
	    CasingPressure2Ptr => v
    end subroutine


    
    
end module CGaugesProblemsVariables