SimulationCore2/Simulator.f90

module Simulator
    use RedisInterface
    use Bop
    use PumpsMain
    use RopMain
    use RotaryTableMain
    use DrawworksMain
    use FluidFlowMain
    use TorqueDragMain
    use MudSystemMain
    use PipeRams1Main
    use PipeRams2Main
    use KillLineMain
    use ChokeLineMain
    use BlindRamsMain
    use AnnularMain
    use TopDriveMain
    use CManifolds
    use GeoMain
    use ChokeControlMain
    use COperationScenariosMain

    ! For Json read and write
    use CStringConfiguration
    use CFormation
    use CReservoir
    use CShoe
    use CAccumulator
    use CBopStack
    use CHoisting
    use CPower
    use CPumpsVariables
    use CRigSize
    use CCasingLinerChoke
    use CPathGeneration
    use CWellSurveyData
    use MudPropertiesModule

    use CBitProblems
    use CBopProblems
    use CChokeProblems
    use CDrillStemProblems
    use CGaugesProblems
    use CHoistingProblems
    use CKickProblems
    use CLostProblems
    use CMudTreatmentProblems
    use COtherProblems
    use CPumpProblems
    use CRotaryProblems

    use OperationScenariosModule
    use PermissionsModule
    use UnitySignalsModule

    use CBopControlPanel
    use CChokeControlPanel
    use CChokeManifold
    use CDataDisplayConsole
    use CDrillingConsole
    use CHook
    use CStandPipeManifold
    use CTopDrivePanel
    use DrillingWatchModule
    use CTanks

    use :: json_module, rk => json_rk
    
    implicit none
    type(json_file)            :: jsonfile
    type(json_value),pointer :: jsonvalue
    type(json_core) :: jsoncore
    logical                    :: is_found
    real T1,T2
    character(len=:),allocatable::redisContent
    
    contains
    subroutine Simulate
        integer :: t
        !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
        t=0
        ! call initConnection()
        ! print *,"redis exmaple program"
    
        ! call jsoncore%create_object(jsonvalue,'')
        ! call ConfigurationToJson(jsonvalue)
        ! call WarningsToJson(jsonvalue)
        ! call ProblemsToJson(jsonvalue)
        ! print *,"write starts"
        ! call jsoncore%serialize(jsonvalue,redisContent)
        ! ! s = "Test redis write!"
        ! call setData(redisContent)
        ! print *,"write ends len=",len(redisContent)
    
        ! call getData(s2)
        ! print *,"len(read)=",len(s2)
        ! print *, s2(1:10),' .... ', s2(len(s2)-10:len(s2))
        ! call deallocateData()
        ! ! print *,"S2 = ",s2
        ! deallocate(s2)
    
        call jsoncore%create_object(jsonvalue,'')
        call initConnection()
        call write_variables()
        call read_variables()
        call jsoncore%print(jsonvalue,'test.json')
        call jsoncore%destroy(jsonvalue)
 
        ! print *,"s2=",redisContent
        ! call deallocateData()
        ! print *,"redisContent Deallocated!"
        ! print *,"s2=",redisContent
        ! call init_modules()
        ! call cpu_time(T1)
        ! do while (t<0)
        !     !!read variable from shared file
        !     call read_variables()
        !     exit
        !     !! Tarmigh, Now merged with TorqueDrag (FluidFlow)
        !     ! call Rop_Step()
            
        !     !! Rafiee, nothing changed
        !     call BopStack_Step()
            
        !     !! Tarmigh, now is rewritten
        !     call Pump1_Step()
        !     !call Pump2_Step()

        !     !! Rafiee
        !     call ChokeControl_Step()
            
        !     !! Location ./Equipment/Rotarytable
        !     !! Variables: 
        !     !! Does not have step function            
        !     !! Call RTable_StartUp in the start
        !     !! Again has a loop in each step
        !     !! Tarmigh, now is rewritten
        !     call RotaryTable_Step()
            
        !     !! Location ./Equipment/Drawworks
        !     !! Variables: 
        !     !! Does not have step function            
        !     !! Call ..._StartUp in the start
        !     !! Again has a loop in each step
        !     !! Tarmigh, now is rewritten
        !     call Drawworks_Step()
            
        !     !! Empty nothing called
        !     !! Merged in FluidFlow
        !     ! call TorqueDrag_Step()
            
        !     !! Location: ./Equipment/MudSystem
        !     !! Variables: MudSystem_variables.f90 and MudSystem.f90
        !     !! Step function simply calls LineupAndPath in MudSystem.f90
        !     !! had not startUp
        !     !! Rafiee
        !     call MudSystem_Step()

        !     !! Location ./Equipment/BopStack
        !     !! Variables: VARIABLES,CBopStackVariables,CBopControlPanelVariables,CEquipmentsConstants
        !     !! Step function added, only call PIPE_RAMS1 and 2 function
        !     !! BOP_StartUp commented
        !     !! Rafiee
        !     call PipeRams1_Step()
        !     call PipeRams2_Step()
            
            
        !     !! Location ./Equipment/BopStack
        !     !! Variables: VARIABLES,CBopStackVariables,CBopControlPanelVariables,CEquipmentsConstants,CAccumulatorVariables,CSimulationVariables
        !     !! Step function added, only call PIPE_RAMS1 and PIPE_RAMS2 function
        !     !! BOP_StartUp commented
        !     !! Rafiee
        !     call KillLine_Step()
            
        !     !! Probably like other bopstack equipments
        !     !! Rafiee            
        !     call ChokeLine_Step()
        !     call BlindRams_Step()
        !     call Annular_Step()
            
        !     !!Tarmigh. Step must rewrittem
        !     call TopDrive_Step()
            
        !     !!Empty
        !     ! call Geo_Step()
            
        !     !!Ahmadi
        !     call PathFinding_Step()
        !     !! Sheikh
        !     call FluidFlow_Step()
            
        !     !! Ahmadi
        !     call OperationScenarios_Step()
            
        !     !! Write variables to shared files
        !     call write_variables()

        !     print *,"t=",t
        !     t = t + 1
        ! end do
        ! call jsoncore%destroy(jsonvalue)
        ! call cpu_time(T2)
        ! print *,"Total Execution Time =",t2-t1
    end subroutine Simulate

    subroutine write_variables()
        use CAccumulator
        use json_module
        implicit none
        ! character(len=:),allocatable::s

        call ConfigurationToJson(jsonvalue)
        call WarningsToJson(jsonvalue)
        call ProblemsToJson(jsonvalue)
        call EquipmentsToJson(jsonvalue)

        print *,"write starts"
        call jsoncore%serialize(jsonvalue,redisContent)
        ! s = "Test redis write!"
        call setData(redisContent)
        print *,"write ends"
    end subroutine

    subroutine read_variables
        call getData(redisContent)
        call jsoncore%deserialize(jsonvalue,redisContent)
        ! print *,"Read from Redix:",redisContent
        ! ! Load the file.
        ! call jsonfile%load_file('config.json'); if (jsonfile%failed()) stop
        ! print *,"read complete"
        ! call jsonfile%get('t0', a1, is_found); if (.not. is_found) return
        ! call jsonfile%get('dt', a2, is_found); if (.not. is_found) return
        ! call jsonfile%get('tf', a3, is_found); if (.not. is_found) return
        ! call jsonfile%get('mu', a4, is_found); if (.not. is_found) return
        ! call jsonfile%get('x0', x0, is_found); if (.not. is_found) return

        ! if (is_found) then
        !     print *, a1,a2,a3,a4
        !     print *, x0
        ! end if

        ! call jsonfile%destroy()
    end subroutine

    subroutine init_modules
        !Tarmigh
        call Pump1_Init()
        !call Pump2_Step()
        call RotaryTable_Init()
        call Drawworks_Init()
        call TopDrive_Init()        
        !Nothing in init (and step)
        ! call Rop_Init()
        ! call TorqueDrag_Init()
        ! call Geo_Step()
        
        !! Rafiee
        call BopStack_Init()
        call ChokeControl_Init()
        call MudSystem_Init()
        !Again calls Bop_Startup
        ! call PipeRams1_Init()
        ! call PipeRams2_Step()
        ! call KillLine_Step()
        ! call ChokeLine_Step()
        ! call BlindRams_Step()
        ! call Annular_Step()
        
        !! Sheikh
        call FluidFlow_Init()
        
        !! Ahmadi
        call PathFinding_Init()
        ! Calls OSInitialization and that sub only subscribes some notif 
        ! call OperationScenarios_Init()
    end subroutine init_modules

    subroutine EquipmentsToJson(parent)

        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'Equipments')
        
        ! 2. add member of data type to new node
        call BopControlPanelToJson(p)
        call ChokeControlPanelToJson(p)
        call ChokeManifoldToJson(p)
        call DataDisplayConsoleToJson(p)
        call DrillingConsoleToJson(p)
        call HookToJson(p)
        call StandPipeManifoldToJson(p)
        call TopDrivePanelToJson(p)
        call DrillingWatchToJson(p)
        call TankToJson(p)

        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine

    subroutine ConfigurationToJson(parent)

        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'Configuration')
        
        ! 2. add member of data type to new node
        call StringConfigurationToJson(p) 
        call FormationToJson(p) 
        call ReservoirToJson(p) 
        call ShoeToJson(p) 
        call AccumulatorToJson(p) 
        call BopStackToJson(p) 
        call HoistingToJson(p) 
        call PowerToJson(p) 
        call PumpsToJson(p) 
        call RigSizeToJson(p) 
        call CasingLinerChokeToJson(p) 
        call PathGenerationToJson(p) 
        ! call WellSurveyDataToJson(p) 
        call MudPropertiesToJson(p) 

        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine

    subroutine WarningsToJson(parent)
        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'Warnings')
        
        ! 2. add member of data type to new node
        call json%add(p,"PumpWithKellyDisconnected",data%Warnings%PumpWithKellyDisconnected)
        call json%add(p,"PumpWithTopdriveDisconnected",data%Warnings%PumpWithTopdriveDisconnected)
        call json%add(p,"Pump1PopOffValveBlown",data%Warnings%Pump1PopOffValveBlown)
        call json%add(p,"Pump1Failure",data%Warnings%Pump1Failure)
        call json%add(p,"Pump2PopOffValveBlown",data%Warnings%Pump2PopOffValveBlown)
        call json%add(p,"Pump2Failure",data%Warnings%Pump2Failure)
        call json%add(p,"Pump3PopOffValveBlown",data%Warnings%Pump3PopOffValveBlown)
        call json%add(p,"Pump3Failure",data%Warnings%Pump3Failure)
        call json%add(p,"DrawworksGearsAbuse",data%Warnings%DrawworksGearsAbuse)
        call json%add(p,"RotaryGearsAbuse",data%Warnings%RotaryGearsAbuse)
        call json%add(p,"HoistLineBreak",data%Warnings%HoistLineBreak)
        call json%add(p,"PartedDrillString",data%Warnings%PartedDrillString)
        call json%add(p,"ActiveTankOverflow",data%Warnings%ActiveTankOverflow)
        call json%add(p,"ActiveTankUnderVolume",data%Warnings%ActiveTankUnderVolume)
        call json%add(p,"TripTankOverflow",data%Warnings%TripTankOverflow)
        call json%add(p,"DrillPipeTwistOff",data%Warnings%DrillPipeTwistOff)
        call json%add(p,"DrillPipeParted",data%Warnings%DrillPipeParted)
        call json%add(p,"TripWithSlipsSet",data%Warnings%TripWithSlipsSet)
        call json%add(p,"Blowout",data%Warnings%Blowout)
        call json%add(p,"UndergroundBlowout",data%Warnings%UndergroundBlowout)
        call json%add(p,"MaximumWellDepthExceeded",data%Warnings%MaximumWellDepthExceeded)
        call json%add(p,"CrownCollision",data%Warnings%CrownCollision)
        call json%add(p,"FloorCollision",data%Warnings%FloorCollision)
        call json%add(p,"TopdriveRotaryTableConfilict",data%Warnings%TopdriveRotaryTableConfilict)

        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine

    subroutine ProblemsToJson(parent)
        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'Problems')
        
        ! 2. add member of data type to new node
        call BitProblemsToJson(p)
        call BopProblemsToJson(p)
        call ChokeProblemsToJson(p)
        call DrillStemProblemsToJson(p)
        call GaugesProblemsToJson(p)
        call HoistingProblemsToJson(p)
        call KickProblemsToJson(p)
        call LostProblemsToJson(p)
        call MudTreatmentProblemsToJson(p)
        call OtherProblemsToJson(p)
        call PumpProblemsToJson(p)
        call RotaryProblemsToJson(p)
        
        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine

    subroutine StateToJson(parent)

        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'State')

        ! call OperationScenarioToJson(p)
        call notificationsToJson(p)
        ! call permissionsToJson(p)
        ! call unitySignalsToJson(p)
        ! call StudentStationToJson(p)
        ! call BopStackInputToJson(p)
        ! call BopStackAccToJson(p)
        ! call RamLineToJson(p)
        ! call AnnularComputationalToJson(p)
        ! call AnnularToJson(p)
        ! call PipeRam1ToJson(p)
        ! call ShearRamToJson(p)
        ! call PipeRam2ToJson(p)
        ! call ChokeLineToJson(p)
        ! call KillLineToJson(p)
        ! call PumpsToJson(p)
        ! call RAMToJson(p)
        ! call RAMSToJson(p)
        ! call ChokeToJson(p)
        ! call AirDrivenPumpToJson(p)
        ! call AirPumpLineToJson(p)
        ! call CHOOKEToJson(p)
        ! call DrawworksToJson(p)
        ! call MudSystemToJson(p)
        ! call MUDToJson(p)
        ! call MPumpsToJson(p)
        ! call PUMPToJson(p)
        ! call RTableToJson(p)
        ! call TDSToJson(p)
        ! call GasType(3)ToJson(p)
        ! call PressureDisplayToJson(p)
        ! call FricPressDropToJson(p)
        ! call ROP_SpecToJson(p)
        ! call ROP_BitToJson(p)
        ! call TDGeoToJson(p)
        ! call F_String(:)ToJson(p)
        ! call F_CountsToJson(p)
        ! call F_Interval(:)ToJson(p)
        ! call OD_Annulus(4)ToJson(p)
        ! call TD_DrillStemToJson(p)
        ! call TD_DrillStemsToJson(p)
        ! call TD_StringToJson(p)
        ! call TD_CountToJson(p)
        ! call G_StringElementToJson(p)
        ! call TD_VolToJson(p)
        ! call TD_GeneralToJson(p)
        ! call TD_BOPToJson(p)
        ! call TD_BOPElement(4)ToJson(p)
        ! call TD_StConnToJson(p)
        ! call TD_LoadToJson(p)
        ! call TD_WellElToJson(p)
        ! call TD_CasingToJson(p)
        ! call TD_LinerToJson(p)
        ! call TD_OpenHoleToJson(p)
        ! call TD_ROPHoleToJson(p)
        ! call TD_WellGeneralToJson(p)
        ! call TD_WellGeo(:)ToJson(p)
                
        ! 2. add member of data type to new node

        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine

    !use this as a template
    subroutine notificationsToJson(parent)

        type(json_value),pointer :: parent
        type(json_core) :: json
        type(json_value),pointer :: p

        ! 1. create new node
        call json%create_object(p,'Notifications')
        
        ! 2. add member of data type to new node

        ! 3. add new node to parent
        call json%add(parent,p)
    end subroutine



end module Simulator