SimulationCore2/Equipments/MudSystem/Trip_Out_andPump.i90

# 1 "/home/admin/SimulationCore2/Equipments/MudSystem/Trip_Out_andPump.f90"
subroutine TripOut_and_Pump    !  is called in subroutine CirculationCodeSelect
    
        Use GeoElements_FluidModule
        USE CMudPropertiesVariables
        USE MudSystemVARIABLES
use SimulationVariables !@@@
        use SimulationVariables
        USE CHOKEVARIABLES
!use ConfigurationVariables !@
!use CDataDisplayConsole
!!@ use ConfigurationVariables ,  StandPipePressureDataDisplay=>StandPipePressure
!use CManifolds
        use SimulationVariables !@
        USE CHOKEVARIABLES
!use ConfigurationVariables !@
!use CChokeManifoldVariables
    use SimulationVariables
!use CTanks
!@use ConfigurationVariables, TripTankVolume2 => data%Equipments%DrillingWatch%TripTankVolume, TripTankDensity2 => TripTankDensity
        USE sROP_Other_Variables
        USE sROP_Variables
        use KickVARIABLESModule
        Use CShoeVariables
        use CError
   
   implicit none
   
integer i,ii,AddLocation, iloc_edited, iloc_changedTo2
Real(8) ExcessMudVolume_Remained,SavedDensityForOp

!===========================================================WELL============================================================
!===========================================================WELL============================================================

        data%State%MudSystem%StringFlowRate= data%State%MUD(2)%Q
        data%State%MudSystem%AnnulusFlowRate= data%State%MUD(2)%Q
!write(*,*) 'data%State%MUD(2)%Q=====' , data%State%MUD(2)%Q
        
 
            write(*,*) 'Trip Out'

! write(*,*) 'check point 1=='
!
!
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!
!    write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!
!
!write(*,*) '==check point 1'

!========================Horizontal PIPE ENTRANCE=================
        
         if (ABS(data%State%MudSystem%SuctionDensity_Old - data%State%MudSystem%Suction_Density_MudSystem) >= data%State%MudSystem%DensityMixTol) then     ! new mud is pumped
             
            call data%State%MudSystem%Hz_Density%AddToFirst (data%State%MudSystem%Suction_Density_MudSystem)
            call data%State%MudSystem%Hz_MudDischarged_Volume%AddToFirst (0.0d0)
            call data%State%MudSystem%Hz_Mud_Forehead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(1))
            call data%State%MudSystem%Hz_Mud_Forehead_section%AddToFirst (1)
            call data%State%MudSystem%Hz_Mud_Backhead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(1))
            call data%State%MudSystem%Hz_Mud_Backhead_section%AddToFirst (1)
            call data%State%MudSystem%Hz_RemainedVolume_in_LastSection%AddToFirst (0.0d0)
            call data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%AddToFirst (0.0d0)
            call data%State%MudSystem%Hz_MudOrKick%AddToFirst (0)  
             
             data%State%MudSystem%SuctionDensity_Old= data%State%MudSystem%Suction_Density_MudSystem
         endif

!========================Horizontal PIPE STRING=================
         
                data%State%MudSystem%Hz_MudDischarged_Volume%Array(1)= data%State%MudSystem%Hz_MudDischarged_Volume%Array(1)+ ((data%State%MudSystem%StringFlowRate/60.0d0)*data%State%MudSystem%DeltaT_Mudline)    !(gal)
        
                
                data%State%MudSystem%total_add = data%State%MudSystem%total_add + ((data%State%MudSystem%StringFlowRate/60.0d0)*data%State%MudSystem%DeltaT_Mudline)
                
                
                    if (data%Equipments%ChokeControlPanel%ChokePanelStrokeResetSwitch == 1) then
                        data%State%MudSystem%total_add= 0.
                    endif                 
                
!write(*,*) ' total decrease(add to HZ)=' , total_add
!write(*,*) ' add to HZ=' , ((data%State%MudSystem%StringFlowRate/60.0d0)*DeltaT_Mudline)
        
                
                
imud=0       
    do while (imud < data%State%MudSystem%Hz_Mud_Forehead_X%Length())
        imud = imud + 1 
        
            if (imud> 1) then
                data%State%MudSystem%Hz_Mud_Backhead_X%Array(imud)= data%State%MudSystem%Hz_Mud_Forehead_X%Array(imud-1)
                data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud)= data%State%MudSystem%Hz_Mud_Forehead_section%Array(imud-1)
            endif

                
            data%State%MudSystem%DirectionCoef= (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud))) &
                / ABS(data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud)))
! +1 for string  ,   -1 for annulus
                
                                                                                                                    
            data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%DirectionCoef* (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud))- data%State%MudSystem%Hz_Mud_Backhead_X%Array(imud))* &
                data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud)) !(ft^3)
            data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%Array(imud)* 7.48051948d0        ! ft^3  to gal
            

            if ( data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud) <= data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%Array(imud)) then
                data%State%MudSystem%Hz_Mud_Forehead_section%Array(imud)= data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud)
                data%State%MudSystem%Hz_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Hz_Mud_Backhead_X%Array(imud)+ data%State%MudSystem%DirectionCoef*(data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud)/7.48051948d0)/data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud))
                
            else
                
                
                data%State%MudSystem%isection= data%State%MudSystem%Hz_Mud_Backhead_section%Array(imud)+1
                data%State%MudSystem%Hz_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Hz_EmptyVolume_inBackheadLocation%Array(imud)
                    
                do 
                        if (data%State%MudSystem%isection > 1) then        ! (horizontal pipe exit)
                            data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Hz_RemainedVolume_in_LastSection%Array(imud)
                            data%State%MudSystem%Hz_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Xend_PipeSection(1)
                            data%State%MudSystem%Hz_Mud_Forehead_section%Array(imud)= 1
                            
                            if (data%State%MudSystem%Hz_MudDischarged_Volume%Array(imud)<= 0.0d0)  then      ! imud is completely exited form the string
                                call RemoveHzMudArrays(imud)
                            endif
                            
                            exit
                        endif
                                 
                    data%State%MudSystem%xx= data%State%MudSystem%Hz_RemainedVolume_in_LastSection%Array(imud)/ data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)   !(gal)
                        
                    if (data%State%MudSystem%xx<= 1.0) then
                        data%State%MudSystem%Hz_Mud_Forehead_section%Array(imud)= data%State%MudSystem%isection
                        data%State%MudSystem%Hz_Mud_Forehead_X%Array(imud)= (data%State%MudSystem%xx * (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%isection)- data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)))+ data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)
                        exit
                    else
                        data%State%MudSystem%Hz_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Hz_RemainedVolume_in_LastSection%Array(imud)- data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)
                        data%State%MudSystem%isection= data%State%MudSystem%isection+ 1
                                                      
                    endif

                enddo
            
            endif   
        
    enddo
!========================Horizontal PIPE END=================
          
            
          
!========================Utube1 Air Element Removing=================
    
!if (UtubeMode1Activated== .true.) then      ! StringUpdate == .true.
!
!    StringDensity_Old= data%State%MudSystem%St_Density%Array(2)
!
!    UtubeMode1Activated= .false.
!endif
        
!========================Utube1 Air Element Removing=================
          
          
!========================Utube2 Removing from Annulus=================
    
        if (data%State%MudSystem%UtubeMode2Activated== .true.) then      ! StringUpdate == .true.
            data%State%MudSystem%TotalAddedVolume=0.
            
            if (data%State%MudSystem%Ann_MudOrKick%Last() == 104) then        !movaghati. albate age merge anjam shode bashe moshkeli nist
                call RemoveAnnulusMudArrays(data%State%MudSystem%Ann_MudOrKick%Length())
            endif
            
            data%State%MudSystem%UtubeMode2Activated= .false.
        endif
        

!========================Utube2 Removing from Annulus End=================
        
!========================New Pipe Filling=================
    
        if (data%State%MudSystem%AddedElementsToString > 0) then      ! StringUpdate == .true.
            
!NoPipeAdded= F_StringIntervalCounts - F_StringIntervalCountsOld

            
            data%State%MudSystem%NewPipeFilling=0
            
            IF (data%State%MudSystem%St_MudOrKick%First() == 104) then
                data%State%MudSystem%St_MudDischarged_Volume%Array(1) = data%State%MudSystem%St_MudDischarged_Volume%Array(1) + sum(data%State%MudSystem%PipeSection_VolumeCapacity(2:1+data%State%MudSystem%AddedElementsToString))   ! new pipe is filled by air
            else
                call data%State%MudSystem%St_Density%AddToFirst (0.d0)
                call data%State%MudSystem%St_MudDischarged_Volume%AddToFirst (sum(data%State%MudSystem%PipeSection_VolumeCapacity(2:1+data%State%MudSystem%AddedElementsToString)))
                call data%State%MudSystem%St_Mud_Forehead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(2))
                call data%State%MudSystem%St_Mud_Forehead_section%AddToFirst (2)
                call data%State%MudSystem%St_Mud_Backhead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(2))
                call data%State%MudSystem%St_Mud_Backhead_section%AddToFirst (2)
                call data%State%MudSystem%St_RemainedVolume_in_LastSection%AddToFirst (0.d0)
                call data%State%MudSystem%St_EmptyVolume_inBackheadLocation%AddToFirst (0.d0)
                call data%State%MudSystem%St_MudOrKick%AddToFirst (104)
            endif

        endif
        
!F_StringIntervalCountsOld= F_StringIntervalCounts
    
        
            
          if (data%State%MudSystem%NewPipeFilling == 0) then  ! 2= is the first element of string (1= is for Hz pipe)
              
                
                data%State%MudSystem%LackageMudVolume= data%State%MudSystem%St_MudDischarged_Volume%Array(1)      ! = Air element
                
                
!write(*,*) 'LackageMudVolume=' , LackageMudVolume

           
            
                 if (ABS(data%State%MudSystem%St_Density%Array(2) - data%State%MudSystem%Hz_Density%Last()) >= data%State%MudSystem%DensityMixTol) then     ! new mud is pumped
                    call data%State%MudSystem%St_Density%AddTo (2,data%State%MudSystem%Hz_Density%Last())
                    call data%State%MudSystem%St_MudDischarged_Volume%AddTo (2,0.d0)
                    call data%State%MudSystem%St_Mud_Forehead_X%AddTo (2,data%State%MudSystem%Xstart_PipeSection(2))
                    call data%State%MudSystem%St_Mud_Forehead_section%AddTo (2 , 2)
                    call data%State%MudSystem%St_Mud_Backhead_X%AddTo (2,data%State%MudSystem%Xstart_PipeSection(2))
                    call data%State%MudSystem%St_Mud_Backhead_section%AddTo (2 ,2)
                    call data%State%MudSystem%St_RemainedVolume_in_LastSection%AddTo (2,0.d0)
                    call data%State%MudSystem%St_EmptyVolume_inBackheadLocation%AddTo (2,0.d0)
                    call data%State%MudSystem%St_MudOrKick%AddTo (2,0)
             
!StringDensity_Old= Hz_Density%Last()
                 endif 
                

                data%State%MudSystem%St_MudDischarged_Volume%Array(2)= data%State%MudSystem%St_MudDischarged_Volume%Array(2)+ min( ((data%State%MudSystem%StringFlowRate/60.0d0)*data%State%MudSystem%DeltaT_Mudline), data%State%MudSystem%LackageMudVolume)  !(gal)
                
                data%State%MudSystem%St_MudDischarged_Volume%Array(1)= data%State%MudSystem%St_MudDischarged_Volume%Array(1)- min( ((data%State%MudSystem%StringFlowRate/60.0d0)*data%State%MudSystem%DeltaT_Mudline), data%State%MudSystem%LackageMudVolume)  ! air(gal)
    
!LackageMudVolumeAfterFilling= sum(PipeSection_VolumeCapacity(2:F_StringIntervalCounts)) - sum(St_MudDischarged_Volume%Array(:))
                
                data%State%MudSystem%LackageMudVolumeAfterFilling= data%State%MudSystem%St_MudDischarged_Volume%Array(1)      ! last time it should be zero
                
                
                
                if (data%State%MudSystem%LackageMudVolumeAfterFilling == 0.) then
                    data%State%MudSystem%NewPipeFilling= 1
                    call RemoveStringMudArrays(1)
                    data%State%MudSystem%St_Mud_Backhead_X%Array(1) = data%State%MudSystem%Xstart_PipeSection(2)
                    data%State%MudSystem%St_Mud_Backhead_section%Array(1) = 2
                endif
                
          endif

!========================New Pipe Filling End=================
        
        
        if (data%State%MudSystem%NewPipeFilling == 0) then
            data%State%MudSystem%StringFlowRate= 0.
            data%State%MudSystem%AnnulusFlowRate= 0.
        endif   
        
        data%State%MudSystem%StringFlowRateFinal= data%State%MudSystem%StringFlowRate
        data%State%MudSystem%AnnulusFlowRateFinal= data%State%MudSystem%AnnulusFlowRate
     
    
!========================STRING ENTRANCE=================
         if (data%State%MudSystem%StringFlowRateFinal > 0.0 .and. ABS(data%State%MudSystem%St_Density%First() - data%State%MudSystem%Hz_Density%Last()) >= data%State%MudSystem%DensityMixTol) then     ! new mud is pumped
!if (ABS(StringDensity_Old - Hz_Density%Last()) >= DensityMixTol) then     ! new mud is pumped
            call data%State%MudSystem%St_Density%AddToFirst (data%State%MudSystem%Hz_Density%Last())
            call data%State%MudSystem%St_MudDischarged_Volume%AddToFirst (0.0d0)
            call data%State%MudSystem%St_Mud_Forehead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(2))
            call data%State%MudSystem%St_Mud_Forehead_section%AddToFirst (2)
            call data%State%MudSystem%St_Mud_Backhead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(2))
            call data%State%MudSystem%St_Mud_Backhead_section%AddToFirst (2)
            call data%State%MudSystem%St_RemainedVolume_in_LastSection%AddToFirst (0.0d0)
            call data%State%MudSystem%St_EmptyVolume_inBackheadLocation%AddToFirst (0.0d0)
            call data%State%MudSystem%St_MudOrKick%AddToFirst (0)
             
!StringDensity_Old= Hz_Density%Last()
         endif
                data%State%MudSystem%St_MudDischarged_Volume%Array(1)= data%State%MudSystem%St_MudDischarged_Volume%Array(1)+ ((data%State%MudSystem%StringFlowRate/60.0d0)*data%State%MudSystem%DeltaT_Mudline)    !(gal)

!=============== save String Mud data===========
    data%State%MudSystem%StMudVolumeSum= 0.d0
!St_MudSaved_Density= 0.d0
    data%State%MudSystem%St_Saved_MudDischarged_Volume= 0.d0
!Saved_St_MudOrKick= 0
!Ann_to_Choke_2mud= .false.

    do imud=1, data%State%MudSystem%St_MudDischarged_Volume%Length()
        data%State%MudSystem%StMudVolumeSum= data%State%MudSystem%StMudVolumeSum + data%State%MudSystem%St_MudDischarged_Volume%Array(imud)
        if ( data%State%MudSystem%StMudVolumeSum > sum(data%State%MudSystem%PipeSection_VolumeCapacity(2:data%State%F_Counts%StringIntervalCounts)) ) then
!IF (St_MudOrKick%Array(imud) == 0) THEN
                data%State%MudSystem%St_MudSaved_Density = data%State%MudSystem%St_Density%Array(imud)
                data%State%MudSystem%St_Saved_MudDischarged_Volume = data%State%MudSystem%StMudVolumeSum - sum(data%State%MudSystem%PipeSection_VolumeCapacity(2:data%State%F_Counts%StringIntervalCounts))
!ELSEIF (St_MudOrKick%Array(imud) > 0 .AND. St_MudOrKick%Array(imud) <100) THEN        ! 104= AIR
!    St_Kick_Saved_Volume = StMudVolumeSum - sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!    Saved_St_MudOrKick= St_MudOrKick%Array (imud)
!    St_KickSaved_Density= data%State%MudSystem%St_Density%Array(imud)
!END IF
            
            do ii= imud + 1, data%State%MudSystem%St_MudDischarged_Volume%Length()
!IF (St_MudOrKick%Array(ii) == 0) THEN
                    data%State%MudSystem%St_MudSaved_Density = ((data%State%MudSystem%St_MudSaved_Density * data%State%MudSystem%St_Saved_MudDischarged_Volume) + (data%State%MudSystem%St_Density%Array(ii) * data%State%MudSystem%St_MudDischarged_Volume%Array(ii))) / (data%State%MudSystem%St_Saved_MudDischarged_Volume + data%State%MudSystem%St_MudDischarged_Volume%Array(ii))
                    data%State%MudSystem%St_Saved_MudDischarged_Volume = data%State%MudSystem%St_Saved_MudDischarged_Volume + data%State%MudSystem%St_MudDischarged_Volume%Array(ii)

!ELSEIF (St_MudOrKick%Array(imud) > 0 .AND. St_MudOrKick%Array(imud) <100) THEN        ! 104= AIR
!    St_Kick_Saved_Volume = St_Kick_Saved_Volume + St_MudDischarged_Volume%Array(ii)
!    Saved_St_MudOrKick= St_MudOrKick%Array (ii)
!    St_KickSaved_Density= data%State%MudSystem%St_Density%Array(ii)
!END IF
            enddo
            
            
!WRITE (*,*) 'St_Saved_Mud_Volume, St_Kick_Saved_Volume', St_Saved_MudDischarged_Volume, St_Kick_Saved_Volume
            exit ! exits do
            
        endif
        
    enddo
data%State%MudSystem%St_Saved_MudDischarged_Volume_Final= data%State%MudSystem%St_Saved_MudDischarged_Volume

IF (data%State%MudSystem%WellHeadIsOpen)     data%State%MudSystem%MudVolume_InjectedToBH = data%State%MudSystem%St_Saved_MudDischarged_Volume_Final

!======================================================================
                           
                
!========================STRING=================
         
imud=0  
    do while (imud < data%State%MudSystem%St_Mud_Forehead_X%Length())
        imud = imud + 1        
        
            if (imud> 1) then
                data%State%MudSystem%St_Mud_Backhead_X%Array(imud)= data%State%MudSystem%St_Mud_Forehead_X%Array(imud-1)
                data%State%MudSystem%St_Mud_Backhead_section%Array(imud)= data%State%MudSystem%St_Mud_Forehead_section%Array(imud-1)
            endif
            
            data%State%MudSystem%DirectionCoef= (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%St_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%St_Mud_Backhead_section%Array(imud))) &
                / ABS(data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%St_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%St_Mud_Backhead_section%Array(imud)))
! +1 for string  ,   -1 for annulus
                
                                                                                                                    
            data%State%MudSystem%St_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%DirectionCoef* (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%St_Mud_Backhead_section%Array(imud))- data%State%MudSystem%St_Mud_Backhead_X%Array(imud))* &
                data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%St_Mud_Backhead_section%Array(imud)) !(ft^3)
            data%State%MudSystem%St_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%St_EmptyVolume_inBackheadLocation%Array(imud)* 7.48051948d0       ! ft^3  to gal
            
            if ( data%State%MudSystem%St_MudDischarged_Volume%Array(imud) <= data%State%MudSystem%St_EmptyVolume_inBackheadLocation%Array(imud)) then
                data%State%MudSystem%St_Mud_Forehead_section%Array(imud)= data%State%MudSystem%St_Mud_Backhead_section%Array(imud)
                data%State%MudSystem%St_Mud_Forehead_X%Array(imud)= data%State%MudSystem%St_Mud_Backhead_X%Array(imud)+ data%State%MudSystem%DirectionCoef*(data%State%MudSystem%St_MudDischarged_Volume%Array(imud)/7.48051948d0)/data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%St_Mud_Backhead_section%Array(imud))
!   7.48 is for gal to ft^3
                
            else
                    
                data%State%MudSystem%isection= data%State%MudSystem%St_Mud_Backhead_section%Array(imud)+1
                data%State%MudSystem%St_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%St_MudDischarged_Volume%Array(imud)- data%State%MudSystem%St_EmptyVolume_inBackheadLocation%Array(imud)
                    
                do 
                        if (data%State%MudSystem%isection > data%State%F_Counts%StringIntervalCounts) then        ! last pipe section(string exit)
                            data%State%MudSystem%St_MudDischarged_Volume%Array(imud)= data%State%MudSystem%St_MudDischarged_Volume%Array(imud)- data%State%MudSystem%St_RemainedVolume_in_LastSection%Array(imud)
                            data%State%MudSystem%St_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Xend_PipeSection(data%State%F_Counts%StringIntervalCounts)
                            data%State%MudSystem%St_Mud_Forehead_section%Array(imud)= data%State%F_Counts%StringIntervalCounts
                            
                            if (data%State%MudSystem%St_MudDischarged_Volume%Array(imud)<= 0.0d0)  then       ! imud is completely exited form the string
                                call RemoveStringMudArrays(imud)
                            endif
                            
                            exit
                        endif
                                 
                    data%State%MudSystem%xx= data%State%MudSystem%St_RemainedVolume_in_LastSection%Array(imud)/ data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)   !(gal)
                        
                    if (data%State%MudSystem%xx<= 1.0) then
                        data%State%MudSystem%St_Mud_Forehead_section%Array(imud)= data%State%MudSystem%isection
                        data%State%MudSystem%St_Mud_Forehead_X%Array(imud)= (data%State%MudSystem%xx * (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%isection)- data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)))+ data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)
                        exit
                    else
                        data%State%MudSystem%St_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%St_RemainedVolume_in_LastSection%Array(imud)- data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)
                        data%State%MudSystem%isection= data%State%MudSystem%isection+ 1
                        
                                
                    endif

                enddo
            
            endif   

    enddo
!========================STRING END=================

!write(*,*) ' a before=='
!
!    do imud=1, Op_MudDischarged_Volume%Length()
!        write(*,*) 'Op:', imud, Op_MudDischarged_Volume%Array(imud), Op_Density%Array(imud) ,Op_MudOrKick%Array(imud)
!    enddo
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!
!     write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!
!
!write(*,*) '==== a before'
    
    iloc_changedTo2 = 0
    
    IF (data%State%MudSystem%Op_MudOrKick%Last() /= 0 .and. data%State%MudSystem%Op_MudOrKick%Last()==data%State%MudSystem%Ann_MudOrKick%First())  then
        data%State%MudSystem%iLoc=2   ! it may be 1,2,3 or more,  all of them are kick
        iloc_changedTo2= 1
    endif
    
    

    iloc_edited= 0
!write(*,*) sum(Op_MudDischarged_Volume%Array(:)) , ((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline) , Ann_MudDischarged_Volume%First() , sum(OpSection_VolumeCapacity(1:F_BottomHoleIntervalCounts))
    if (data%State%MudSystem%iLoc==2 .and.  sum(data%State%MudSystem%Op_MudDischarged_Volume%Array(:))+((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline)+data%State%MudSystem%Ann_MudDischarged_Volume%First() < sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts))  ) then
        data%State%MudSystem%iLoc = 1
        iloc_edited = 1
!write(*,*) 'hellooooooo'
    endif
    

!write(*,*) 'ann-cap:' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1 :F_StringIntervalCounts+F_AnnulusIntervalCounts) )
        
    
!write(*,*) 'iloc====' , iloc
!MudVolume_InjectedToBH
    
    
!=============================Add PumpFlowRate to Bottom Hole ==============================
!if ( data%State%MudSystem%AnnulusFlowRate>0.0 ) then
        if ( data%State%MudSystem%MudVolume_InjectedToBH > 0.0 ) then 
            
            
                if (KickOffBottom) then                         ! (kickOffBottom = F) means kick is next to the bottom hole and usually kick is entering the
                    AddLocation= data%State%MudSystem%Op_Density%Length()-data%State%MudSystem%iLoc+1+1    ! well, thus pumped mud should be placed above the kick
                else
                    AddLocation= data%State%MudSystem%Op_Density%Length()+1
                endif
!write(*,*) 'AddLocation====' , AddLocation
                if ( AddLocation== 0)      CALL ErrorStop ('AddLocation=0')
 
                
                if ( ABS(data%State%MudSystem%St_Density%Last() - data%State%MudSystem%Op_Density%Array(AddLocation-1)) >= data%State%MudSystem%DensityMixTol ) then
!write(*,*) 'new pocket**'
!write(*,*) 'data%State%MudSystem%St_Density%Last()=' , data%State%MudSystem%St_Density%Last()
!write(*,*) 'Op_Density%Array(AddLocation-1)=' , Op_Density%Array(AddLocation-1)
                    

                    call data%State%MudSystem%Op_Density% AddTo (AddLocation,data%State%MudSystem%St_Density%Last())
!call Op_MudDischarged_Volume%AddTo (AddLocation,((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline))
                    call data%State%MudSystem%Op_MudDischarged_Volume%AddTo (AddLocation,data%State%MudSystem%MudVolume_InjectedToBH)
                    call data%State%MudSystem%Op_Mud_Forehead_X%AddTo (AddLocation,data%State%MudSystem%Xstart_OpSection(1))
                    call data%State%MudSystem%Op_Mud_Forehead_section%AddTo (AddLocation,1)
                    call data%State%MudSystem%Op_Mud_Backhead_X%AddTo (AddLocation,data%State%MudSystem%Xstart_OpSection(1))
                    call data%State%MudSystem%Op_Mud_Backhead_section%AddTo (AddLocation,1)
                    call data%State%MudSystem%Op_RemainedVolume_in_LastSection%AddTo (AddLocation,0.0d0)
                    call data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%AddTo (AddLocation,0.0d0)
                    call data%State%MudSystem%Op_MudOrKick%AddTo (AddLocation,0) 
                else
!write(*,*) 'merge**'
!write(*,*) 'density before=' , Op_Density%Array(AddLocation-1)
!write(*,*) 'data%State%MudSystem%St_Density%Last() for mix=' , data%State%MudSystem%St_Density%Last()
       
!Op_Density%Array(AddLocation-1)= (Op_Density%Array(AddLocation-1)*Op_MudDischarged_Volume%Array(AddLocation-1)+data%State%MudSystem%St_Density%Last()*((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline))/(Op_MudDischarged_Volume%Array(AddLocation-1)+((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline))
!Op_MudDischarged_Volume%Array(AddLocation-1)= Op_MudDischarged_Volume%Array(AddLocation-1) + ((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline)
                    
                    data%State%MudSystem%Op_Density%Array(AddLocation-1)= (data%State%MudSystem%Op_Density%Array(AddLocation-1)*data%State%MudSystem%Op_MudDischarged_Volume%Array(AddLocation-1)+data%State%MudSystem%St_Density%Last()*data%State%MudSystem%MudVolume_InjectedToBH)/(data%State%MudSystem%Op_MudDischarged_Volume%Array(AddLocation-1)+data%State%MudSystem%MudVolume_InjectedToBH)
                    data%State%MudSystem%Op_MudDischarged_Volume%Array(AddLocation-1)= data%State%MudSystem%Op_MudDischarged_Volume%Array(AddLocation-1) + data%State%MudSystem%MudVolume_InjectedToBH
!write(*,*) 'density after=' ,   Op_Density%Array(AddLocation-1)
                    
                endif
    
        endif   
!=======================Add PumpFlowRate to Bottom Hole- End ==============================
       
!write(*,*) 'pump added-before add to ann=='
!
!    do imud=1, Op_MudDischarged_Volume%Length()
!        write(*,*) 'Op:', imud, Op_MudDischarged_Volume%Array(imud), Op_Density%Array(imud) ,Op_MudOrKick%Array(imud)
!    enddo
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!
!      write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!
!
!
!write(*,*) 'pump added====before add to ann'
        
        
!=============== save OP Mud data to transfer to the annulus enterance due to tripin or kick
    data%State%MudSystem%OpMudVolumeSum= 0.d0
!Op_MudSaved_Density= 0.d0
!Op_KickSaved_Density= 0.d0
    data%State%MudSystem%Op_Saved_MudDischarged_Volume= 0.d0
    data%State%MudSystem%Op_Kick_Saved_Volume= 0.d0
    data%State%MudSystem%Saved_Op_MudOrKick= 0
    data%State%MudSystem%Op_NeededVolume_ToFill= 0.d0
    
    
    
    
    do imud=1, data%State%MudSystem%Op_MudDischarged_Volume%Length()
        
            data%State%MudSystem%OpMudVolumeSum= data%State%MudSystem%OpMudVolumeSum + data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)
        
        if ( data%State%MudSystem%OpMudVolumeSum > sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts)) ) then !1st mode
            
            IF (data%State%MudSystem%Op_MudOrKick%Array(imud) == 0) THEN
                data%State%MudSystem%Op_MudSaved_Density = data%State%MudSystem%Op_Density%Array(imud)
                data%State%MudSystem%Op_Saved_MudDischarged_Volume = data%State%MudSystem%OpMudVolumeSum - sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts))
            ELSE
                
                data%State%MudSystem%Op_Kick_Saved_Volume = data%State%MudSystem%OpMudVolumeSum - sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts))
                data%State%MudSystem%Saved_Op_MudOrKick= data%State%MudSystem%Op_MudOrKick%Array (imud)
                data%State%MudSystem%Op_KickSaved_Density= data%State%MudSystem%Op_Density%Array(imud)
                data%State%MudSystem%iLoc= 2
                iloc_changedTo2= 2
            END IF
            
            do ii= imud + 1, data%State%MudSystem%Op_MudDischarged_Volume%Length()
                IF (data%State%MudSystem%Op_MudOrKick%Array(ii) == 0) THEN
                    data%State%MudSystem%Op_MudSaved_Density = ((data%State%MudSystem%Op_MudSaved_Density * data%State%MudSystem%Op_Saved_MudDischarged_Volume) + (data%State%MudSystem%Op_Density%Array(ii) * data%State%MudSystem%Op_MudDischarged_Volume%Array(ii))) / (data%State%MudSystem%Op_Saved_MudDischarged_Volume + data%State%MudSystem%Op_MudDischarged_Volume%Array(ii))
                    data%State%MudSystem%Op_Saved_MudDischarged_Volume = data%State%MudSystem%Op_Saved_MudDischarged_Volume + data%State%MudSystem%Op_MudDischarged_Volume%Array(ii)
                ELSE
                    data%State%MudSystem%Op_Kick_Saved_Volume = data%State%MudSystem%Op_Kick_Saved_Volume + data%State%MudSystem%Op_MudDischarged_Volume%Array(ii)
                    data%State%MudSystem%Saved_Op_MudOrKick= data%State%MudSystem%Op_MudOrKick%Array (ii)
                    data%State%MudSystem%Op_KickSaved_Density= data%State%MudSystem%Op_Density%Array(ii)
                    data%State%MudSystem%iLoc= 2
                    iloc_changedTo2= 3
                END IF
            enddo
            
            exit ! exits do
            
        endif
        
    enddo
        
        if ( sum(data%State%MudSystem%Op_MudDischarged_Volume%Array(:)) < sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts)) ) then !2nd & 3rd mode
            
            data%State%MudSystem%Op_NeededVolume_ToFill= sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts)) - sum(data%State%MudSystem%Op_MudDischarged_Volume%Array(:))
        endif

        
!
!write(*,*) 'Op_NeededVolume_ToFill=' , Op_NeededVolume_ToFill
!write(*,*) 'Op_Saved_MudDischarged_Volume=' , Op_Saved_MudDischarged_Volume
!write(*,*) 'Op_Kick_Saved_Volume=' , Op_Kick_Saved_Volume
!
!write(*,*) 'op cap=' , sum(OpSection_VolumeCapacity(1:F_BottomHoleIntervalCounts))
!write(*,*) ' op sum mud=' , sum(Op_MudDischarged_Volume%Array(:))
    
    
             

 
!======================================================================
                
   
    
    
!========================Tripping Out- 1st & 3rd Mode====================
        


        if ( (data%State%MudSystem%Op_Kick_Saved_Volume > 0.0 .or. data%State%MudSystem%Op_Saved_MudDischarged_Volume> 0.0) .or.  &     ! 1st Mode-Pump flow is more than trip out so fluid Level in Annulus Increases
        (data%State%MudSystem%Op_NeededVolume_ToFill < ABS(data%State%MudSystem%DeltaVolumeAnnulusCapacity)) ) then   !3rd Mode-fluid Level in Annulus Increases
            
        
!if ( Op_Kick_Saved_Volume > 0.0 .or. Op_Saved_MudDischarged_Volume> 0.0 )   write(*,*) 'trip out 1st mode'
        
        if ( data%State%MudSystem%Op_NeededVolume_ToFill > 0.0 .and. data%State%MudSystem%Op_NeededVolume_ToFill < ABS(data%State%MudSystem%DeltaVolumeAnnulusCapacity) )  then
!   write(*,*) 'trip out 3rd mode'
            
            data%State%MudSystem%NewVolume= 0.d0 ! for condition iloc=1
            
            SavedDensityForOp= data%State%MudSystem%Ann_Density%Array(1)
          
            ExcessMudVolume_Remained= data%State%MudSystem%Op_NeededVolume_ToFill      
          
            
            imud=1
           
            Do
                
                if(data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud) < ExcessMudVolume_Remained) then
                    ExcessMudVolume_Remained= ExcessMudVolume_Remained- data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)
                    call data%State%MudSystem%Ann_MudDischarged_Volume%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Backhead_X%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Backhead_section%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Forehead_X%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Forehead_section%Remove (imud)
                    call data%State%MudSystem%Ann_Density%Remove (imud)
                    call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Remove (imud)
                    call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Remove (imud)
                    call data%State%MudSystem%Ann_MudOrKick%Remove (imud)  
                    
                elseif(data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud) > ExcessMudVolume_Remained) then
                    data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)- ExcessMudVolume_Remained
                    exit
                    
                else    !(Ann_MudDischarged_Volume%Array(imud) == ExcessMudVolume_Remained)
                    call data%State%MudSystem%Ann_MudDischarged_Volume%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Backhead_X%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Backhead_section%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Forehead_X%Remove (imud)
                    call data%State%MudSystem%Ann_Mud_Forehead_section%Remove (imud)
                    call data%State%MudSystem%Ann_Density%Remove (imud)
                    call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Remove (imud)
                    call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Remove (imud)
                    call data%State%MudSystem%Ann_MudOrKick%Remove (imud) 
                    exit
                    
                endif
                
            enddo
            
            
!write(*,*) 'Op_NeededVolume_ToFill=' ,Op_NeededVolume_ToFill
!write(*,*) 'ABS(DeltaVolumeAnnulusCapacity)=' ,ABS(DeltaVolumeAnnulusCapacity)
!write(*,*) 'Op_MudOrKick%Last()=' ,Op_MudOrKick%Last()
!write(*,*) 'iloc=' ,iloc
!write(*,*) 'iloc_edited=' ,iloc_edited
              
            
        endif
        

! (data%State%MudSystem%AnnulusFlowRate/60.)*DeltaT_Mudline) - DeltaVolumeOp  will be added to annulus
    
!if (iLoc == 1) then
        data%State%MudSystem%MudSection= data%State%F_Counts%StringIntervalCounts+1
        data%State%MudSystem%BackheadX= data%State%MudSystem%Xstart_PipeSection(data%State%F_Counts%StringIntervalCounts+1)
!elseif (iLoc == 2) then
!    MudSection= Kick_Forehead_section
!    BackheadX= Kick_Forehead_X
!endif

!========================ANNULUS ENTRANCE====================
!if (KickMigration_2SideBit == .FALSE.) then
!    if ( ABS(AnnulusSuctionDensity_Old - data%State%MudSystem%St_Density%Last()) >= DensityMixTol ) then ! new mud is pumped
!    call Ann_Density%AddTo (iLoc,data%State%MudSystem%St_Density%Last())
!    call Ann_MudDischarged_Volume%AddTo (iLoc,0.0d0)
!    call Ann_Mud_Forehead_X%AddTo (iLoc,BackheadX)
!    call Ann_Mud_Forehead_section%AddTo (iLoc,MudSection)
!    call Ann_Mud_Backhead_X%AddTo (iLoc,BackheadX)
!    call Ann_Mud_Backhead_section%AddTo (iLoc,MudSection)
!    call Ann_RemainedVolume_in_LastSection%AddTo (iLoc,0.0d0)
!    call Ann_EmptyVolume_inBackheadLocation%AddTo (iLoc,0.0d0)
!    call Ann_MudOrKick%AddTo (iLoc,0)
!    call Ann_CuttingMud%AddTo (iLoc,0)
!
!    AnnulusSuctionDensity_Old= data%State%MudSystem%St_Density%Last()
!
!    MudIsChanged= .true.
!    endif
!
!            Ann_MudDischarged_Volume%Array(iLoc)= Ann_MudDischarged_Volume%Array(iLoc)+ ((data%State%MudSystem%AnnulusFlowRate/60.0d0)*DeltaT_Mudline) - ((2-iloc)*ABS(DeltaVolumePipe))    !(gal)
!
!endif
    
     
    
    
         data%State%MudSystem%Ann_Mud_Backhead_section%Array(1)= data%State%MudSystem%MudSection !it is needed to be updated for (a condition that one pipe is removed from Annulus due to trip out)- (and add pipe)
         data%State%MudSystem%Ann_Mud_Backhead_X%Array(1)= data%State%MudSystem%BackheadX
         
         
         
!iloc=1 : (2-iloc)=1 normal
!iloc=2 : (2-iloc)=0 kick influx or migration is in annulus
         
!========================Same to Tripping In====================

!write(*,*) 'Op_Kick_Saved_Volume,Op_Saved_MudDischarged_Volume=' , Op_Kick_Saved_Volume,Op_Saved_MudDischarged_Volume

                
                if (data%State%MudSystem%Op_Kick_Saved_Volume > 0.0 .and. data%State%MudSystem%Ann_MudOrKick%First() == 0) then   !1st Mode
                    write(*,*) 'Kick influx enters Annulus'
                    call data%State%MudSystem%Ann_Density%AddToFirst (data%State%MudSystem%Op_KickSaved_Density)
                    call data%State%MudSystem%Ann_MudDischarged_Volume%AddToFirst (data%State%MudSystem%Op_Kick_Saved_Volume)
                    call data%State%MudSystem%Ann_Mud_Forehead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(data%State%F_Counts%StringIntervalCounts+1))
                    call data%State%MudSystem%Ann_Mud_Forehead_section%AddToFirst (data%State%F_Counts%StringIntervalCounts+1)
                    call data%State%MudSystem%Ann_Mud_Backhead_X%AddToFirst (data%State%MudSystem%Xstart_PipeSection(data%State%F_Counts%StringIntervalCounts+1))
                    call data%State%MudSystem%Ann_Mud_Backhead_section%AddToFirst (data%State%F_Counts%StringIntervalCounts+1)
                    call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%AddToFirst (0.0d0)
                    call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%AddToFirst (0.0d0) 
                    call data%State%MudSystem%Ann_MudOrKick%AddToFirst (data%State%MudSystem%Saved_Op_MudOrKick)      !<<<<<<<<
                    call data%State%MudSystem%Ann_CuttingMud%AddToFirst (0)
                elseif (data%State%MudSystem%Op_Kick_Saved_Volume > 0.0 .and. data%State%MudSystem%Ann_MudOrKick%First() /= 0) then
                    data%State%MudSystem%Ann_MudDischarged_Volume%Array(1)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(1) + data%State%MudSystem%Op_Kick_Saved_Volume
                endif
 

  
       if ( data%State%MudSystem%Op_NeededVolume_ToFill > 0.0 .and. (data%State%MudSystem%Op_NeededVolume_ToFill < ABS(data%State%MudSystem%DeltaVolumeAnnulusCapacity)) .and. data%State%MudSystem%Op_MudOrKick%Last() == 0 .and. (data%State%MudSystem%iLoc==2 .or. iloc_edited==1)) then   !3rd Mode
!write(*,*) 'checkpoint 0'
!! for avoid kick separation -Op_MudOrKick%Last() == 0: because of pump
                    data%State%MudSystem%NewVolume= ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) ! =volume that should be added to iloc=2 in Ann
                    call RemoveOpMudArrays(data%State%MudSystem%Op_Density%Length()) ! mud here is removed and then will be added to iloc=2 in Ann in %%1 section
                    if ( data%State%MudSystem%Ann_MudDischarged_Volume%Array(1) > ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) ) then! 1st in Ann = kick ,, we expect: ((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline)= OpMudVolLast
                        data%State%MudSystem%Ann_MudDischarged_Volume%Array(1)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(1) - ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline)
                        data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())= data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())+ ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline)   ! kick
                    else
                        call RemoveAnnulusMudArrays(1)  !kick is removed
                        data%State%MudSystem%iLoc= 1
                        data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())= data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())+ ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline)
                        write(*,*) 'little expand'
! including  a little expand
                    endif
        endif  
                
        if (data%State%MudSystem%Op_Saved_MudDischarged_Volume> 0.0) then   !1st Mode
            data%State%MudSystem%NewDensity= data%State%MudSystem%Op_MudSaved_Density
!write(*,*) 'iloc,...' , iloc,((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline),Op_Saved_MudDischarged_Volume
            if (data%State%MudSystem%iLoc==1) then
!write(*,*) 'checkpoint 1'
                data%State%MudSystem%NewVolume= data%State%MudSystem%Op_Saved_MudDischarged_Volume
            elseif (real(((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline)) - real(data%State%MudSystem%Op_Saved_MudDischarged_Volume) > 0.d0 ) then                   ! for avoid kick separation
!write(*,*) 'checkpoint 2'
                data%State%MudSystem%NewVolume= ((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) !- Op_Saved_MudDischarged_Volume
                call RemoveOpMudArrays(data%State%MudSystem%Op_Density%Length()) ! mud here is removed and then will be added to iloc=2 in Ann
                if ( data%State%MudSystem%Ann_MudDischarged_Volume%Array(1) > (((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) - data%State%MudSystem%Op_Saved_MudDischarged_Volume) ) then! 1st in Ann = kick
                    data%State%MudSystem%Ann_MudDischarged_Volume%Array(1)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(1) - (((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) - data%State%MudSystem%Op_Saved_MudDischarged_Volume)
                    data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())= data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())+ (((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) - data%State%MudSystem%Op_Saved_MudDischarged_Volume)  !kick
                else
                    call RemoveAnnulusMudArrays(1)  !kick is removed
                    data%State%MudSystem%iLoc =1
                    data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())= data%State%MudSystem%Op_MudDischarged_Volume%Array(data%State%MudSystem%Op_Density%Length())+ (((data%State%MudSystem%AnnulusFlowRate/60.d0)*data%State%MudSystem%DeltaT_Mudline) - data%State%MudSystem%Op_Saved_MudDischarged_Volume)
                    write(*,*) 'little expand'

! including  a little expand
                endif
                

            else        ! iloc==2 , ((data%State%MudSystem%AnnulusFlowRate/60.d0)*DeltaT_Mudline) == Op_Saved_MudDischarged_Volume
!write(*,*) 'checkpoint 3'
               data%State%MudSystem%NewVolume= data%State%MudSystem%Op_Saved_MudDischarged_Volume ! it is normal mode
            endif
            
            
        endif
        
!write(*,*) 'NewVolume=' ,NewVolume
                

        if( data%State%MudSystem%Ann_Density%Length() == 1 .and. data%State%MudSystem%iLoc ==2 ) then
            
        write(*,*) '***errorb****=='
        
        write(*,*) 'iloc_edited=' , iloc_edited
        write(*,*) 'iloc_changedTo2=' , iloc_changedTo2
        
        write(*,*) 'Op_Capacity===' , sum(data%State%MudSystem%OpSection_VolumeCapacity(1:data%State%F_Counts%BottomHoleIntervalCounts))
        
         WRITE (*,*) 'Op_Saved_MudDischarged_Volume, Op_Kick_Saved_Volume',data%State%MudSystem%Op_Saved_MudDischarged_Volume, data%State%MudSystem%Op_Kick_Saved_Volume
        
        do imud=1, data%State%MudSystem%Op_MudDischarged_Volume%Length()
            write(*,*) 'Op:', imud, data%State%MudSystem%Op_MudDischarged_Volume%Array(imud), data%State%MudSystem%Op_Density%Array(imud) ,data%State%MudSystem%Op_MudOrKick%Array(imud)
        enddo             
        
        do imud=1, data%State%MudSystem%Ann_MudDischarged_Volume%Length()
            write(*,*) 'Ann:', imud, data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud), data%State%MudSystem%Ann_Density%Array(imud) ,data%State%MudSystem%Ann_MudOrKick%Array(imud)
        enddo
        
     
    
        write(*,*) '==***errorb****'
        endif        
        
        
        
        
                
                if ((data%State%ROP_Bit%RateOfPenetration==0 .and. abs(data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)-data%State%MudSystem%NewDensity)< data%State%MudSystem%DensityMixTol) &     !%%1 section
                .or. (data%State%ROP_Bit%RateOfPenetration>0. .and. data%State%MudSystem%Ann_CuttingMud%Array(data%State%MudSystem%iLoc)==1 .and. abs(data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)-data%State%MudSystem%NewDensity)< data%State%MudSystem%CuttingDensityMixTol) &
                .or. (data%State%ROP_Bit%RateOfPenetration>0. .and. data%State%MudSystem%Ann_CuttingMud%Array(data%State%MudSystem%iLoc)==0 .and. data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc) < 42.) ) then   ! 1-Pockets are Merged
!write(*,*) '%%1 section a)'
                    data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)= (data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)*data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%NewDensity*data%State%MudSystem%NewVolume)/(data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%NewVolume)
                    data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%NewVolume
                    data%State%MudSystem%Ann_Mud_Forehead_X%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%BackheadX
                    data%State%MudSystem%Ann_Mud_Forehead_section%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%MudSection
                    data%State%MudSystem%Ann_Mud_Backhead_X%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%BackheadX
                    data%State%MudSystem%Ann_Mud_Backhead_section%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%MudSection
                    data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(data%State%MudSystem%iLoc)= (0.0d0)
                    data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(data%State%MudSystem%iLoc)= (0.0d0)                    
                else       ! 2-Merging conditions are not meeted, so new pocket
!write(*,*) '%%1 section b)'
                    
                    call data%State%MudSystem%Ann_Density%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%NewDensity)
                    call data%State%MudSystem%Ann_MudDischarged_Volume%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%NewVolume)
                    call data%State%MudSystem%Ann_Mud_Forehead_X%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%BackheadX)
                    call data%State%MudSystem%Ann_Mud_Forehead_section%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%MudSection)
                    call data%State%MudSystem%Ann_Mud_Backhead_X%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%BackheadX)
                    call data%State%MudSystem%Ann_Mud_Backhead_section%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%MudSection)
                    call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%AddTo (data%State%MudSystem%iLoc,0.0d0)
                    call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%AddTo (data%State%MudSystem%iLoc,0.0d0)
                    call data%State%MudSystem%Ann_MudOrKick%AddTo (data%State%MudSystem%iLoc,0)
                    call data%State%MudSystem%Ann_CuttingMud%AddTo (data%State%MudSystem%iLoc,0)
!write(*,*) 'd) annLength=' , Ann_Density%Length()
                
                endif

     
   
             
!========================Same to Tripping In - End====================
            
!write(*,*)  'b)Ann_Mud sum=' , sum(Ann_MudDischarged_Volume%Array(:))
 
!write(*,*) 'no======2'
!
!    do imud=1, Op_MudDischarged_Volume%Length()
!        write(*,*) 'Op:', imud, Op_MudDischarged_Volume%Array(imud), Op_Density%Array(imud) ,Op_MudOrKick%Array(imud)
!    enddo
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!
!
!    write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!
!
!write(*,*) '2======no'
          
!=============== save Ann Mud data to transfer to the ChokeLine enterance
    data%State%MudSystem%AnnMudVolumeSum= 0.d0
!Ann_MudSaved_Density= 0.d0
!Ann_KickSaved_Density= 0.d0
    data%State%MudSystem%Ann_Saved_MudDischarged_Volume= 0.d0
    data%State%MudSystem%Ann_Kick_Saved_Volume= 0.d0
    data%State%MudSystem%Saved_Ann_MudOrKick= 0
    data%State%MudSystem%Ann_to_Choke_2mud= .false.
    
    
    
    
    do imud=1, data%State%MudSystem%Ann_MudDischarged_Volume%Length()
        
            data%State%MudSystem%AnnMudVolumeSum= data%State%MudSystem%AnnMudVolumeSum + data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)
        
        if ( data%State%MudSystem%AnnMudVolumeSum > sum(data%State%MudSystem%PipeSection_VolumeCapacity(data%State%F_Counts%StringIntervalCounts+1:data%State%MudSystem%NoPipeSections)) ) then
            
            IF (data%State%MudSystem%Ann_MudOrKick%Array(imud) == 0) THEN
                data%State%MudSystem%Ann_MudSaved_Density = data%State%MudSystem%Ann_Density%Array(imud)
                data%State%MudSystem%Ann_Saved_MudDischarged_Volume = data%State%MudSystem%AnnMudVolumeSum - sum(data%State%MudSystem%PipeSection_VolumeCapacity(data%State%F_Counts%StringIntervalCounts+1:data%State%MudSystem%NoPipeSections))
            ELSEIF (data%State%MudSystem%Ann_MudOrKick%Array(imud) > 0 .AND. data%State%MudSystem%Ann_MudOrKick%Array(imud) <100) THEN        ! 104= AIR
                data%State%MudSystem%Ann_Kick_Saved_Volume = data%State%MudSystem%AnnMudVolumeSum - sum(data%State%MudSystem%PipeSection_VolumeCapacity(data%State%F_Counts%StringIntervalCounts+1:data%State%MudSystem%NoPipeSections))
                data%State%MudSystem%Saved_Ann_MudOrKick= data%State%MudSystem%Ann_MudOrKick%Array (imud)
                data%State%MudSystem%Ann_KickSaved_Density= data%State%MudSystem%Ann_Density%Array(imud)
            END IF
            
            do ii= imud + 1, data%State%MudSystem%Ann_MudDischarged_Volume%Length()
                IF (data%State%MudSystem%Ann_MudOrKick%Array(ii) == 0) THEN
                    data%State%MudSystem%Ann_MudSaved_Density = ((data%State%MudSystem%Ann_MudSaved_Density * data%State%MudSystem%Ann_Saved_MudDischarged_Volume) + (data%State%MudSystem%Ann_Density%Array(ii) * data%State%MudSystem%Ann_MudDischarged_Volume%Array(ii))) / (data%State%MudSystem%Ann_Saved_MudDischarged_Volume + data%State%MudSystem%Ann_MudDischarged_Volume%Array(ii))
                    data%State%MudSystem%Ann_Saved_MudDischarged_Volume = data%State%MudSystem%Ann_Saved_MudDischarged_Volume + data%State%MudSystem%Ann_MudDischarged_Volume%Array(ii)
                    data%State%MudSystem%Ann_to_Choke_2mud= .true.
                ELSEIF (data%State%MudSystem%Ann_MudOrKick%Array(ii) > 0 .AND. data%State%MudSystem%Ann_MudOrKick%Array(ii) <100) THEN        ! 104= AIR
                    data%State%MudSystem%Ann_Kick_Saved_Volume = data%State%MudSystem%Ann_Kick_Saved_Volume + data%State%MudSystem%Ann_MudDischarged_Volume%Array(ii)
                    data%State%MudSystem%Saved_Ann_MudOrKick= data%State%MudSystem%Ann_MudOrKick%Array (ii)
                    data%State%MudSystem%Ann_KickSaved_Density= data%State%MudSystem%Ann_Density%Array(ii)
                END IF
            enddo
            
            exit ! exits do
            
        endif
        
    enddo
    
data%State%MudSystem%Ann_Saved_MudDischarged_Volume_Final= data%State%MudSystem%Ann_Saved_MudDischarged_Volume
data%State%MudSystem%Ann_Kick_Saved_Volume_Final= data%State%MudSystem%Ann_Kick_Saved_Volume
!write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(data%State%F_Counts%StringIntervalCounts+1:NoPipeSections))
!write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
         
IF (data%State%MudSystem%WellHeadIsOpen)       data%State%MudSystem%MudVolume_InjectedFromAnn = data%State%MudSystem%Ann_Saved_MudDischarged_Volume_Final-((data%State%MudSystem%Qlost/60.0d0)*data%State%MudSystem%DeltaT_Mudline)
!NoGasPocket
!write(*,*) 'Ann_Saved_Mud_Vol,Ann_Kick_Saved_Vol=' , Ann_Saved_MudDischarged_Volume,Ann_Kick_Saved_Volume

!======================================================================

         
!write(*,*)  'Ann_Saved_Mud=' , Ann_Saved_MudDischarged_Volume
!======================== Annulus ====================
             
!MudIsChanged= .false.
         
imud= 0

    do while (imud < data%State%MudSystem%Ann_Mud_Forehead_X%Length())
        imud = imud + 1
        
            if (imud> 1) then
                data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud)= data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud-1)
                data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)= data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud-1)
            endif
            
!    write(*,*) 'imud==' , imud
!write(*,*) '***)Ann_Mud_Backhead_section(imud)= ' , Ann_Mud_Backhead_section%Array(imud), Ann_density%Array(imud)
                
                
            data%State%MudSystem%DirectionCoef= (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud))) &
                / ABS(data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)))
! +1 for string  ,   -1 for annulus
                
                                                                                                                    
            data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%DirectionCoef* (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud))- data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud))* &
                data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)) !(ft^3)
            data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)* 7.48051948d0        ! ft^3  to gal
            
         
            if ( data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud) <= data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)) then
                data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)= data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)
                data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud)+ data%State%MudSystem%DirectionCoef*(data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)/7.48051948d0)/data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud))
!   7.48 is for gal to ft^3
                
            else
                    
                data%State%MudSystem%isection= data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)+1
                data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)
                    
                do 
                        if (data%State%MudSystem%isection > data%State%MudSystem%NoPipeSections) then        ! last pipe section(well exit)
                            data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)
                            data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%NoPipeSections)
                            data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)= data%State%MudSystem%NoPipeSections
                                
                            if (data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)<= 0.0d0)  then       ! imud is completely exited form the well
                                call RemoveAnnulusMudArrays(imud)
                            endif
                            
                            exit
                        endif
                                 
                    data%State%MudSystem%xx= data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)/ data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)   !(gal)
                        
                    if (data%State%MudSystem%xx<= 1.0) then
                        data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)= data%State%MudSystem%isection
                        data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)= (data%State%MudSystem%xx * (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%isection)- data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)))+ data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)
                        exit
                    else
                        data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)- data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)
                        data%State%MudSystem%isection= data%State%MudSystem%isection+ 1
                                
                    endif

                enddo
            
            endif         
     
    enddo
    
            if (data%State%MudSystem%Ann_Mud_Forehead_X%Last() < data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%NoPipeSections)) then
                data%State%MudSystem%Ann_Mud_Forehead_X%Array(data%State%MudSystem%Ann_Mud_Forehead_X%Length()) = data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%NoPipeSections)       ! for error preventing
            endif    
    
!========================ANNULUS END=================


    
!*************************************************************************************************************************
    
!========================Tripping Out- 2nd Mode====================
    
    
        elseif ( data%State%MudSystem%Op_NeededVolume_ToFill > ABS(data%State%MudSystem%DeltaVolumeAnnulusCapacity) ) then   !pump is off or Pump flow is less than trip out so fluid Level in Annulus decreases
!write(*,*) 'trip out 2nd mode'
            

            SavedDensityForOp= data%State%MudSystem%Ann_Density%Array(1)      
!========================ANNULUS ENTRANCE====================
        
! <<< SIMILAR TO UTUBE 2 >>>
                 if ( data%State%MudSystem%Ann_Density%Last() /= 0.0 ) then     ! new mud is pumped
                    call data%State%MudSystem%Ann_Density%Add (0.0d0)   
                    call data%State%MudSystem%Ann_MudDischarged_Volume%Add (0.0d0)
                    call data%State%MudSystem%Ann_Mud_Forehead_X%Add (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%NoPipeSections))
                    call data%State%MudSystem%Ann_Mud_Forehead_section%Add (data%State%MudSystem%NoPipeSections)
                    call data%State%MudSystem%Ann_Mud_Backhead_X%Add (data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%NoPipeSections))
                    call data%State%MudSystem%Ann_Mud_Backhead_section%Add (data%State%MudSystem%NoPipeSections)
                    call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Add (0.0d0)
                    call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Add (0.0d0)
                    call data%State%MudSystem%Ann_MudOrKick%Add (104)
                    call data%State%MudSystem%Ann_CuttingMud%Add (0)
             
!AnnulusSuctionDensity_Old= Hz_Density%Last()
                 endif    

         data%State%MudSystem%Ann_Mud_Forehead_section%Array(data%State%MudSystem%Ann_Mud_Forehead_section%Length())= data%State%MudSystem%NoPipeSections !it is needed to be updated for (a condition that one pipe is removed from Annulus due to trip out)- (and add pipe)
         data%State%MudSystem%Ann_Mud_Forehead_X%Array(data%State%MudSystem%Ann_Mud_Forehead_X%Length())= data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%NoPipeSections)
               
         
         data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%Ann_MudDischarged_Volume%Length())= data%State%MudSystem%Ann_MudDischarged_Volume%Last()+ (data%State%MudSystem%Op_NeededVolume_ToFill - ABS(data%State%MudSystem%DeltaVolumeAnnulusCapacity))  !  Op_NeededVolume_ToFill !ABS(DeltaVolumePipe) - ((data%State%MudSystem%AnnulusFlowRate/60.)*DeltaT_Mudline)    !(gal)

!===================================================================

      

                if ( (data%State%MudSystem%iLoc==2 .or. iloc_edited==1) .and. data%State%MudSystem%Op_MudOrKick%Last()==0 ) then                    ! for avoid kick separation
!write(*,*) 'here mud should be removed from Op last'
                    
                    if (abs(data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)-data%State%MudSystem%Op_Density%Last())< data%State%MudSystem%DensityMixTol) then
                    
                        data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)= (data%State%MudSystem%Ann_Density%Array(data%State%MudSystem%iLoc)*data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%Op_Density%Last()*data%State%MudSystem%Op_MudDischarged_Volume%Last())/(data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%Op_MudDischarged_Volume%Last())
                        data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(data%State%MudSystem%iLoc)+data%State%MudSystem%Op_MudDischarged_Volume%Last()   ! OP_Last is data%State%MUD(effect of pump added mud)
                        data%State%MudSystem%Ann_Mud_Forehead_X%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%BackheadX
                        data%State%MudSystem%Ann_Mud_Forehead_section%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%MudSection
                        data%State%MudSystem%Ann_Mud_Backhead_X%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%BackheadX
                        data%State%MudSystem%Ann_Mud_Backhead_section%Array(data%State%MudSystem%iLoc)= data%State%MudSystem%MudSection
                        data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(data%State%MudSystem%iLoc)= (0.0d0)
                        data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(data%State%MudSystem%iLoc)= (0.0d0) 
!write(*,*) 'merge' ,'Ann_Volume%Array(1)=' , Ann_MudDischarged_Volume%Array(1)
                    
                    else       ! 2-Merging conditions are not meeted, so new pocket
                        call data%State%MudSystem%Ann_Density%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%Op_Density%Last())
                        call data%State%MudSystem%Ann_MudDischarged_Volume%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%Op_MudDischarged_Volume%Last())
                        call data%State%MudSystem%Ann_Mud_Forehead_X%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%BackheadX)
                        call data%State%MudSystem%Ann_Mud_Forehead_section%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%MudSection)
                        call data%State%MudSystem%Ann_Mud_Backhead_X%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%BackheadX)
                        call data%State%MudSystem%Ann_Mud_Backhead_section%AddTo (data%State%MudSystem%iLoc,data%State%MudSystem%MudSection)
                        call data%State%MudSystem%Ann_RemainedVolume_in_LastSection%AddTo (data%State%MudSystem%iLoc,0.0d0)
                        call data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%AddTo (data%State%MudSystem%iLoc,0.0d0)
                        call data%State%MudSystem%Ann_MudOrKick%AddTo (data%State%MudSystem%iLoc,0)
                        call data%State%MudSystem%Ann_CuttingMud%AddTo (data%State%MudSystem%iLoc,0)
                    endif
                    
                    data%State%MudSystem%Op_NeededVolume_ToFill= data%State%MudSystem%Op_NeededVolume_ToFill + data%State%MudSystem%Op_MudDischarged_Volume%Last()     ! OP_Last is data%State%MUD(effect of pump added mud)
                    
                    call RemoveOpMudArrays(data%State%MudSystem%Op_MudOrKick%Length())
                    
                    
                endif                
!===================================================================
       
                
!=============== save Ann Mud data to transfer to the ChokeLine enterance
!AnnMudVolumeSum= 0.d0
!!Ann_MudSaved_Density= 0.d0
!!Ann_KickSaved_Density= 0.d0
    data%State%MudSystem%Ann_Saved_MudDischarged_Volume= 0.d0
    data%State%MudSystem%Ann_Kick_Saved_Volume= 0.d0
!Saved_Ann_MudOrKick= 0
!Ann_to_Choke_2mud= .false.
    
    
    
    
!do imud=1, Ann_MudDischarged_Volume%Length()
!
!        AnnMudVolumeSum= AnnMudVolumeSum + Ann_MudDischarged_Volume%Array(imud)
!
!    if ( AnnMudVolumeSum > sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections)) ) then
!
!        IF (Ann_MudOrKick%Array(imud) == 0) THEN
!            Ann_MudSaved_Density = Ann_Density%Array(imud)
!            Ann_Saved_MudDischarged_Volume = AnnMudVolumeSum - sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!        ELSEIF (Ann_MudOrKick%Array(imud) > 0 .AND. Ann_MudOrKick%Array(imud) <100) THEN        ! 104= AIR
!            Ann_Kick_Saved_Volume = AnnMudVolumeSum - sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!            Saved_Ann_MudOrKick= Ann_MudOrKick%Array (imud)
!            Ann_KickSaved_Density= Ann_Density%Array(imud)
!        END IF
!
!        do ii= imud + 1, Ann_MudDischarged_Volume%Length()
!            IF (Ann_MudOrKick%Array(ii) == 0) THEN
!                Ann_MudSaved_Density = ((Ann_MudSaved_Density * Ann_Saved_MudDischarged_Volume) + (Ann_Density%Array(ii) * Ann_MudDischarged_Volume%Array(ii))) / (Ann_Saved_MudDischarged_Volume + Ann_MudDischarged_Volume%Array(ii))
!                Ann_Saved_MudDischarged_Volume = Ann_Saved_MudDischarged_Volume + Ann_MudDischarged_Volume%Array(ii)
!                Ann_to_Choke_2mud= .true.
!            ELSEIF (Ann_MudOrKick%Array(ii) > 0 .AND. Ann_MudOrKick%Array(ii) <100) THEN        ! 104= AIR
!                Ann_Kick_Saved_Volume = Ann_Kick_Saved_Volume + Ann_MudDischarged_Volume%Array(ii)
!                Saved_Ann_MudOrKick= Ann_MudOrKick%Array (ii)
!                Ann_KickSaved_Density= Ann_Density%Array(ii)
!            END IF
!        enddo
!
!        exit ! exits do
!
!    endif
!
!enddo
    
    
! write(*,*) 'check point 2=='
!
!
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!
!    write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!
!
!write(*,*) '==check point 2'
    
    
    
    
    
data%State%MudSystem%Ann_Saved_MudDischarged_Volume_Final= data%State%MudSystem%Ann_Saved_MudDischarged_Volume
data%State%MudSystem%Ann_Kick_Saved_Volume_Final= data%State%MudSystem%Ann_Kick_Saved_Volume
!write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))

!write(*,*) 'Ann_Saved_MudDischarged_Volume_Final=' , Ann_Saved_MudDischarged_Volume_Final


         
IF (data%State%MudSystem%WellHeadIsOpen)       data%State%MudSystem%MudVolume_InjectedFromAnn = data%State%MudSystem%Ann_Saved_MudDischarged_Volume_Final-((data%State%MudSystem%Qlost/60.0d0)*data%State%MudSystem%DeltaT_Mudline)
!! NoGasPocket > 0 .AND.
         
!write(*,*) 'Ann_Saved_Mud_Vol,Ann_Kick_Saved_Vol=' , Ann_Saved_MudDischarged_Volume,Ann_Kick_Saved_Volume


!======================================================================
                
!========================ANNULUS====================
! <<< SIMILAR TO UTUBE 2 >>>
                
!write(*,*) Ann_MudOrKick%Last(), 'DeltaVolumePipe , after volume=' ,ABS(DeltaVolumePipe), Ann_MudDischarged_Volume%Last()
imud= data%State%MudSystem%Ann_Mud_Forehead_X%Length() + 1

    do while (imud > 1)
        imud = imud - 1 
        
            if (imud< data%State%MudSystem%Ann_Mud_Forehead_X%Length()) then
                data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud+1)
                data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)= data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud+1)
            endif
  
            
!       <<< Fracture Shoe Lost
            IF ( data%State%MudSystem%ShoeLost .and. data%Configuration%Shoe%ShoeDepth < data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud) .and. data%Configuration%Shoe%ShoeDepth >= data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud) ) then
!write(*,*) 'ShoeLost   imud,AnnVolume(imud), VolumeLost:' , imud,Ann_MudDischarged_Volume%Array(imud), (( Qlost/60.0d0)*DeltaT_Mudline)
                data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)-((data%State%MudSystem%Qlost/60.0d0)*data%State%MudSystem%DeltaT_Mudline)    !(gal)
                if (data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud) < 0.0) then
!write(*,*) 'mud is removed by shoe lost, imud=' , imud
                    call RemoveAnnulusMudArrays(imud)
                    imud= imud-1
                    cycle
                endif
               data%State%MudSystem%LostInTripOutIsDone= .true. 
            ENDIF
!           Fracture Shoe Lost >>>
            
            
            
            
            
            
            
            
!write(*,*) 'a)imud,Ann_Mud_Forehead_section=',imud,Ann_Mud_Forehead_section%Array(imud)
                
            data%State%MudSystem%DirectionCoef= (data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud))) &
                / ABS(data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud))-data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)))
! +1 for string  ,   -1 for annulus
                
!write(*,*) 'b)imud,Forehead_X,Xstart_PipeSection=',imud,Ann_Mud_Forehead_X%Array(imud),Xstart_PipeSection(Ann_Mud_Forehead_section%Array(imud))
                                                                                                                    
            data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%DirectionCoef* (data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)- data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)))* &
                data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)) !(ft^3)
            data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)* 7.48051948d0        ! ft^3  to gal

            if ( data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud) <= data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)) then
                data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)= data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)
                data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud)= data%State%MudSystem%Ann_Mud_Forehead_X%Array(imud)- data%State%MudSystem%DirectionCoef*(data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)/7.48051948d0)/data%State%MudSystem%Area_PipeSectionFt(data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud))
!   7.48051948 is for gal to ft^3
            else   
                data%State%MudSystem%isection= data%State%MudSystem%Ann_Mud_Forehead_section%Array(imud)-1
                data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Ann_EmptyVolume_inBackheadLocation%Array(imud)
                
                do 
                        if (data%State%MudSystem%isection < data%State%F_Counts%StringIntervalCounts+1) then        ! last pipe section(well exit) data%State%F_Counts%StringIntervalCounts+1 is the first section in Annulus
                            data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)
                            data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud)= data%State%MudSystem%Xstart_PipeSection(data%State%F_Counts%StringIntervalCounts+1)
                            data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)= data%State%F_Counts%StringIntervalCounts+1
                            
                            if (data%State%MudSystem%Ann_MudDischarged_Volume%Array(imud)<= 0.0d0)  then      ! imud is completely exited form the well
                                call RemoveAnnulusMudArrays(imud)
                            endif
                            
                            exit
                        endif
                                 
                    data%State%MudSystem%xx= data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)/ data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)   !(gal)
                        
                    if (data%State%MudSystem%xx<= 1.0) then
                        data%State%MudSystem%Ann_Mud_Backhead_section%Array(imud)= data%State%MudSystem%isection
                        data%State%MudSystem%Ann_Mud_Backhead_X%Array(imud)= (data%State%MudSystem%xx * (data%State%MudSystem%Xstart_PipeSection(data%State%MudSystem%isection)- data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%isection)))+ data%State%MudSystem%Xend_PipeSection(data%State%MudSystem%isection)
                        exit
                    else
                        data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Ann_RemainedVolume_in_LastSection%Array(imud)- data%State%MudSystem%PipeSection_VolumeCapacity(data%State%MudSystem%isection)
                        data%State%MudSystem%isection= data%State%MudSystem%isection- 1
                        
                                
                    endif

                enddo
            
            endif   
          
    enddo
!========================ANNULUS END=================
    
        endif       ! end of 1st &3rd & 2nd Mode
        
    
!*************************************************************************************************************************
    
    


        
        
!======================== Bottom Hole Entrance ==========================
!if (iloc == 1) then
    if ( data%State%MudSystem%Op_NeededVolume_ToFill > 0.0 ) then        ! it is needed  for 2nd & 3rd mode
!write(*,*) 'op add for 2nd & 3rd mode done'
        
        

                if ( ABS(data%State%MudSystem%Op_Density%Last() - SavedDensityForOp ) >= data%State%MudSystem%DensityMixTol) then ! .OR. (Op_MudDischarged_Volume%Last()>42.) ) then           ! 1-Merging conditions are not meeted, so new pocket
                                
                call data%State%MudSystem%Op_Density%Add (SavedDensityForOp)
                call data%State%MudSystem%Op_MudDischarged_Volume%Add (data%State%MudSystem%Op_NeededVolume_ToFill)
                call data%State%MudSystem%Op_Mud_Forehead_X%Add (0.0d0)
                call data%State%MudSystem%Op_Mud_Forehead_section%Add (1)
                call data%State%MudSystem%Op_Mud_Backhead_X%Add (0.0d0)
                call data%State%MudSystem%Op_Mud_Backhead_section%Add (1)
                call data%State%MudSystem%Op_RemainedVolume_in_LastSection%Add (0.0d0)
                call data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Add (0.0d0)
                call data%State%MudSystem%Op_MudOrKick%Add (data%State%MudSystem%Ann_MudOrKick%Array(1))
            else                                  ! 2-Pockets are Merged
          
                data%State%MudSystem%Op_Density%Array (data%State%MudSystem%Op_Density%Length())= (SavedDensityForOp*data%State%MudSystem%Op_NeededVolume_ToFill+data%State%MudSystem%Op_Density%Last()*data%State%MudSystem%Op_MudDischarged_Volume%Last())/(data%State%MudSystem%Op_MudDischarged_Volume%Last()+data%State%MudSystem%Op_NeededVolume_ToFill)
                data%State%MudSystem%Op_MudDischarged_Volume%Array (data%State%MudSystem%Op_Density%Length())= data%State%MudSystem%Op_MudDischarged_Volume%Array (data%State%MudSystem%Op_Density%Length()) + data%State%MudSystem%Op_NeededVolume_ToFill
                data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array (data%State%MudSystem%Op_Density%Length())= 0.0
                data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array (data%State%MudSystem%Op_Density%Length())= 0.0
                                
            endif                     

    endif
    


    
!============================= Bottom Hole ==============================

imud=0                     
    do while (imud < data%State%MudSystem%Op_Mud_Forehead_X%Length())
        imud = imud + 1
        
            if (imud> 1) then
                data%State%MudSystem%Op_Mud_Backhead_X%Array(imud)= data%State%MudSystem%Op_Mud_Forehead_X%Array(imud-1)
                data%State%MudSystem%Op_Mud_Backhead_section%Array(imud)= data%State%MudSystem%Op_Mud_Forehead_section%Array(imud-1)
            endif
                
            data%State%MudSystem%DirectionCoef= (data%State%MudSystem%Xend_OpSection(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_OpSection(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud))) &
                / ABS(data%State%MudSystem%Xend_OpSection(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud))-data%State%MudSystem%Xstart_OpSection(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud)))
! +1 for string  ,   -1 for annulus
                
                           
                                                                                                                    
            data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%DirectionCoef* (data%State%MudSystem%Xend_OpSection(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud))- data%State%MudSystem%Op_Mud_Backhead_X%Array(imud))* &
                data%State%MudSystem%Area_OpSectionFt(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud)) !(ft^3)
            data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array(imud)= data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array(imud)* 7.48051948d0        ! ft^3  to gal
            
         
            if ( data%State%MudSystem%Op_MudDischarged_Volume%Array(imud) <= data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array(imud)) then
                data%State%MudSystem%Op_Mud_Forehead_section%Array(imud)= data%State%MudSystem%Op_Mud_Backhead_section%Array(imud)
                data%State%MudSystem%Op_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Op_Mud_Backhead_X%Array(imud)+ data%State%MudSystem%DirectionCoef*(data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)/7.48051948d0)/data%State%MudSystem%Area_OpSectionFt(data%State%MudSystem%Op_Mud_Backhead_section%Array(imud))
!   7.48051948 is for gal to ft^3
                
            else
                    
                data%State%MudSystem%isection= data%State%MudSystem%Op_Mud_Backhead_section%Array(imud)+1
                data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Array(imud)
                    
                do 
                        if (data%State%MudSystem%isection > data%State%F_Counts%BottomHoleIntervalCounts) then        ! last pipe section(well exit)
!if( imud==1) KickDeltaVinAnnulus= Op_RemainedVolume_in_LastSection%Array(imud)      ! Kick enters Annulus space
                            data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)= data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)- data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array(imud)
                            data%State%MudSystem%Op_Mud_Forehead_X%Array(imud)= data%State%MudSystem%Xend_OpSection(data%State%F_Counts%BottomHoleIntervalCounts)
                            data%State%MudSystem%Op_Mud_Forehead_section%Array(imud)= data%State%F_Counts%BottomHoleIntervalCounts
                                
                            if (data%State%MudSystem%Op_MudDischarged_Volume%Array(imud)<= 0.0d0)  then     ! imud is completely exited form the well
                                call data%State%MudSystem%Op_MudDischarged_Volume%Remove (imud)
                                call data%State%MudSystem%Op_Mud_Backhead_X%Remove (imud)
                                call data%State%MudSystem%Op_Mud_Backhead_section%Remove (imud)
                                call data%State%MudSystem%Op_Mud_Forehead_X%Remove (imud)
                                call data%State%MudSystem%Op_Mud_Forehead_section%Remove (imud)
                                call data%State%MudSystem%Op_Density%Remove (imud)
                                call data%State%MudSystem%Op_RemainedVolume_in_LastSection%Remove (imud)
                                call data%State%MudSystem%Op_EmptyVolume_inBackheadLocation%Remove (imud)
                                call data%State%MudSystem%Op_MudOrKick%Remove (imud) 
                                
                            endif
                            
                            exit
                        endif
                                 
                    data%State%MudSystem%xx= data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array(imud)/ data%State%MudSystem%OpSection_VolumeCapacity(data%State%MudSystem%isection)   !(gal)
                        
                    if (data%State%MudSystem%xx<= 1.0) then
                        data%State%MudSystem%Op_Mud_Forehead_section%Array(imud)= data%State%MudSystem%isection
                        data%State%MudSystem%Op_Mud_Forehead_X%Array(imud)= (data%State%MudSystem%xx * (data%State%MudSystem%Xend_OpSection(data%State%MudSystem%isection)- data%State%MudSystem%Xstart_OpSection(data%State%MudSystem%isection)))+ data%State%MudSystem%Xstart_OpSection(data%State%MudSystem%isection)
                        exit
                    else
                        data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array(imud)= data%State%MudSystem%Op_RemainedVolume_in_LastSection%Array(imud)- data%State%MudSystem%OpSection_VolumeCapacity(data%State%MudSystem%isection)
                        data%State%MudSystem%isection= data%State%MudSystem%isection+ 1
                        
                    endif

                enddo
            
            endif   
        
    enddo


    
!========================Bottom Hole END=================
! write(*,*) 'after sorting=='
!!!
!    do imud=1, Op_MudDischarged_Volume%Length()
!        write(*,*) 'Op:', imud, Op_MudDischarged_Volume%Array(imud), Op_Density%Array(imud) ,Op_MudOrKick%Array(imud)
!    enddo
!
!    do imud=1, Ann_MudDischarged_Volume%Length()
!        write(*,*) 'Ann:', imud, Ann_MudDischarged_Volume%Array(imud), Ann_Density%Array(imud) ,Ann_MudOrKick%Array(imud)
!    enddo
!!!
!!    write(*,*) 'Ann cap=' , sum(PipeSection_VolumeCapacity(F_StringIntervalCounts+1:NoPipeSections))
!!     write(*,*) 'Ann mud sum vol=' , sum(Ann_MudDischarged_Volume%Array(:))
!!!
!!!
!write(*,*) '==after sorting'

!=========================================================
    
    
        data%State%MudSystem%total_injected = data%State%MudSystem%total_injected + data%State%MudSystem%MudVolume_InjectedFromAnn
        
                    if (data%Equipments%ChokeControlPanel%ChokePanelStrokeResetSwitch == 1) then
                        data%State%MudSystem%total_injected= 0.
                    endif        
!write(*,*) ' data%State%MudSystem%MudVolume_InjectedFromAnn =' , data%State%MudSystem%MudVolume_InjectedFromAnn
        
!write(*,*) ' total injected-tripout =' , total_injected
!write(*,*) ' injected-tripout =' , data%State%MudSystem%MudVolume_InjectedFromAnn
        
        
    
    
    


    end subroutine TripOut_and_Pump