SimulationCore2/Equipments/Drawworks/Drawworks_INPUTS.i90

# 1 "/home/admin/SimulationCore2/Equipments/Drawworks/Drawworks_INPUTS.f90"
subroutine Drawworks_Inputs

    use CDrillingConsoleVariables
    use SimulationVariables
    use SimulationVariables
! Use CSimulationVariables
    use OperationScenariosModule
    use CWarnings
    use SimulationVariables
    use SimulationVariables !@
    Use TD_StringConnectionData
    Use TD_DrillStemComponents
    use SimulationVariables !@
    use SimulationVariables !@
    
	IMPLICIT NONE
    
    
    
    data%State%Drawworks%AssignmentSwitch  = data%Equipments%DrillingConsole%AssignmentSwitch
    data%State%Drawworks%Switch            = data%Equipments%DrillingConsole%DWSwitch
    data%State%Drawworks%Throttle          = data%Equipments%DrillingConsole%DWThrottle            ![RPM]
    data%State%Drawworks%DriveType         = data%Configuration%Hoisting%DriveType
    data%State%Drawworks%ShearBopSituation = data%State%RamLine%ShearBop_Situation_forTD
!data%State%Drawworks%MotorFaileMalf   = ?????? motaghayere voroudi !dar CHoistingProblemsVariables meghdardehi mishavad
    
    
    
!>>> RAM & ToolJoint Collision
    data%State%Drawworks%TDBOPElementNo    = data%State%TD_BOP%BOPElementNo
    data%State%Drawworks%TDBOPHeight       = data%State%TD_BOP%BOPHeight
    data%State%Drawworks%TDBOPRamDiam      = data%State%TD_BOP%BOPRamDiam
    data%State%Drawworks%TDBOPThickness    = data%State%TD_BOP%BOPThickness
    data%State%Drawworks%TDDrillStemBottom = data%State%TD_String%DrillStemBottom
    data%State%Drawworks%TDWellTotalLength = data%State%TD_WellGeneral%WellTotalLength
    data%State%Drawworks%TDDlMax           = data%State%TD_String%DlMax
    data%State%Drawworks%TDDrillStemComponentsNumbs = data%State%TD_String%DrillStemComponentsNumbs
    if (Allocated(data%State%Drawworks%TDDrillStemsDownDepth)) deAllocate (data%State%Drawworks%TDDrillStemsDownDepth)   ! inja gozashtameshun cho momkene tuye startup tedade elemanha dir berese va error bede
    Allocate   (data%State%Drawworks%TDDrillStemsDownDepth(data%State%Drawworks%TDDrillStemComponentsNumbs+400))         ! +400: because of: Add or Remove DrillStem Components
    data%State%Drawworks%TDDrillStemsDownDepth = data%State%TD_DrillStems%DownDepth
    if (Allocated(data%State%Drawworks%TDDrillStemsToolJointRange)) deAllocate (data%State%Drawworks%TDDrillStemsToolJointRange)
    Allocate   (data%State%Drawworks%TDDrillStemsToolJointRange(data%State%Drawworks%TDDrillStemComponentsNumbs+400))    ! +400: because of: Add or Remove DrillStem Components
    data%State%Drawworks%TDDrillStemsToolJointRange = data%State%TD_DrillStems%ToolJointRange
    if (Allocated(data%State%Drawworks%TDDrillStemsTopDepth)) deAllocate (data%State%Drawworks%TDDrillStemsTopDepth)
    Allocate   (data%State%Drawworks%TDDrillStemsTopDepth(data%State%Drawworks%TDDrillStemComponentsNumbs+400))          ! +400: because of: Add or Remove DrillStem Components
    data%State%Drawworks%TDDrillStemsTopDepth = data%State%TD_DrillStems%TopDepth
    if (Allocated(data%State%Drawworks%TDDrillStemsRtoolJoint)) deAllocate (data%State%Drawworks%TDDrillStemsRtoolJoint)
    Allocate   (data%State%Drawworks%TDDrillStemsRtoolJoint(data%State%Drawworks%TDDrillStemComponentsNumbs+400))        ! +400: because of: Add or Remove DrillStem Components
    data%State%Drawworks%TDDrillStemsRtoolJoint = data%State%TD_DrillStems%RtoolJoint
    
    
    
!>>> Warnings
    data%State%Drawworks%CrownCollision = data%Warnings%CrownCollision
    data%State%Drawworks%FloorCollision = data%Warnings%FloorCollision
    
    
   
    data%State%Drawworks%Conv_Ratio = 1.0d0/.380d0 !che meghdari bashad??????????????????      !data%State%Drawworks%FWD_Conv_Ratio(data%State%Drawworks%ClutchMode,data%State%Drawworks%TransMode)
   
    
    
    data%Equipments%DrillingConsole%ParkingBrakeLed = 0
    
    
    
!===> min&max Hook Height
    if ( data%State%Drawworks%DriveType==1 .and. Get_OperationCondition()==OPERATION_DRILL ) then
        if ( Get_Swing()==SWING_WELL_END .and. Get_KellyConnection()==KELLY_CONNECTION_NOTHING ) then
            data%State%Drawworks%DrillModeCond = 1
            data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight+data%State%OperationScenario%HKL-data%State%OperationScenario%RE                ![ft]  HKL=63.76=Kelly Ass. Height , RE=Release
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_KellyConnection()==KELLY_CONNECTION_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 2
            data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight+data%State%OperationScenario%HKL+data%State%OperationScenario%PL-data%State%OperationScenario%RE             ![ft]  PL=30=Pipe Lenght
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_KellyConnection() == KELLY_CONNECTION_STRING ) then
            data%State%Drawworks%DrillModeCond = 3
            data%State%Drawworks%min_Hook_Height = 21.44d0-data%State%OperationScenario%RE                   ![ft]  ?????????? check  21.44=(data%State%TD_StConn%KellyConst-data%State%TD_StConn%KellyElementConst)
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        else if ( Get_Swing()==SWING_MOUSE_HOLE_END .and. Get_KellyConnection()==KELLY_CONNECTION_NOTHING ) then
            data%State%Drawworks%DrillModeCond = 4
            data%State%Drawworks%min_Hook_Height = 66.d0-data%State%OperationScenario%RE                     ![ft]
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        else if ( Get_Swing()==SWING_MOUSE_HOLE_END .and. Get_KellyConnection()==KELLY_CONNECTION_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 5
            data%State%Drawworks%min_Hook_Height = 65.1d0-data%State%OperationScenario%RE                    ![ft]
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        else if ( Get_Swing()==SWING_RAT_HOLE_END ) then
            data%State%Drawworks%DrillModeCond = 6
            data%State%Drawworks%min_Hook_Height = 66.d0-data%State%OperationScenario%RE                     ![ft]
            data%State%Drawworks%max_Hook_Height = 120.d0                                         ![ft]
        end if
    else if ( data%State%Drawworks%DriveType==1 .and. Get_OperationCondition()==OPERATION_TRIP ) then
        if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_NOTHING ) then
            data%State%Drawworks%DrillModeCond = 7
            data%State%Drawworks%min_Hook_Height = 18.38d0                                        ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_STAND ) then
            data%State%Drawworks%DrillModeCond = 8
            data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight+data%State%OperationScenario%HL+data%State%OperationScenario%SL-(3.d0*data%State%OperationScenario%RE)       ![ft]  HL=17.81=Hook Assy , SL=90=Stand Length , 3: chon meghdari az toole loole(tool joint) dakhele elevator gharar migirad
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 9
            data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight+data%State%OperationScenario%HL+data%State%OperationScenario%PL-(3.d0*data%State%OperationScenario%RE)       ![ft]  3: chon meghdari az toole loole(tool joint) balaye elevator mimanad
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_STRING ) then
            data%State%Drawworks%DrillModeCond = 10
            data%State%Drawworks%min_Hook_Height = 18.5d0-data%State%OperationScenario%RE                    ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_MOUSE_HOLE_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_NOTHING ) then
            data%State%Drawworks%DrillModeCond = 11
            data%State%Drawworks%min_Hook_Height = 19.38d0-data%State%OperationScenario%RE                   ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_MOUSE_HOLE_END .and. Get_ElevatorConnection() == ELEVATOR_CONNECTION_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 12
            data%State%Drawworks%min_Hook_Height = 17.73d0-data%State%OperationScenario%RE                   ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_RAT_HOLE_END ) then
            data%State%Drawworks%DrillModeCond = 13
            data%State%Drawworks%min_Hook_Height = 27.41d0-data%State%OperationScenario%RE                   ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_LATCH_STRING ) then
            data%State%Drawworks%DrillModeCond = 14
            data%State%Drawworks%min_Hook_Height = 18.38d0                                        ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_LATCH_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 25   !warning & collision
            data%State%Drawworks%min_Hook_Height = 18.38d0   !?????????????????                   ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_MOUSE_HOLE_END .and. Get_ElevatorConnection() == ELEVATOR_LATCH_SINGLE ) then
            data%State%Drawworks%DrillModeCond = 26
            data%State%Drawworks%min_Hook_Height = 10.38d0  !?????????????????                    ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        else if ( Get_Swing()==SWING_WELL_END .and. Get_ElevatorConnection() == ELEVATOR_LATCH_STAND ) then
            data%State%Drawworks%DrillModeCond = 27
            data%State%Drawworks%min_Hook_Height = 18.38d0    !?????????????????                  ![ft]
            data%State%Drawworks%max_Hook_Height = 140.d0                                         ![ft]
        end if
    else if ( data%State%Drawworks%DriveType==0 ) then
        if ( Get_TdsSwing()==TDS_SWING_TILT_END ) then
            if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_LATCH_SINGLE ) then
                data%State%Drawworks%DrillModeCond = 15
                data%State%Drawworks%min_Hook_Height = 15.0d0                                     ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_SINGLE ) then
                data%State%Drawworks%DrillModeCond = 16
                data%State%Drawworks%min_Hook_Height = 15.0d0                                     ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_NOTHING ) then
                data%State%Drawworks%DrillModeCond = 17
                data%State%Drawworks%min_Hook_Height = 15.0d0                                     ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            end if
        else if ( Get_TdsSwing()==TDS_SWING_OFF_END ) then
            if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_LATCH_STRING ) then
                data%State%Drawworks%DrillModeCond = 18
                data%State%Drawworks%min_Hook_Height = max(16.0d0,data%State%TD_String%TopJointHeight)       ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_STRING ) then
                data%State%Drawworks%DrillModeCond = 19
                data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight                   ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_STRING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_NOTHING ) then
                data%State%Drawworks%DrillModeCond = 20
                data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight                   ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_NOTHING ) then
                data%State%Drawworks%DrillModeCond = 21
                data%State%Drawworks%min_Hook_Height = max(16.0d0,data%State%TD_String%TopJointHeight)       ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_LATCH_STAND ) then
                data%State%Drawworks%DrillModeCond = 22
                data%State%Drawworks%min_Hook_Height = max(16.0d0,data%State%TD_String%TopJointHeight)       ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_NOTHING .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_STAND ) then
                data%State%Drawworks%DrillModeCond = 23
                data%State%Drawworks%min_Hook_Height = max(16.0d0,data%State%TD_String%TopJointHeight)       ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            else if ( Get_TdsConnectionModes()==TDS_CONNECTION_SPINE .and. Get_TdsElevatorModes()==TDS_ELEVATOR_CONNECTION_NOTHING ) then
                data%State%Drawworks%DrillModeCond = 24
                data%State%Drawworks%min_Hook_Height = data%State%TD_String%TopJointHeight                   ![ft]
                data%State%Drawworks%max_Hook_Height = 140.d0                                     ![ft]
            end if
        end if
    end if
    
    
    
!===> SLIPS SET , No Motion
    if ( data%State%Drawworks%DriveType==1 .and. Get_Slips() == SLIPS_SET_END .and. Get_KellyConnection() == KELLY_CONNECTION_STRING ) then
        data%State%Drawworks%Speed = 0.d0
    end if
    
    if ( data%State%Drawworks%DriveType==0 .and. Get_Slips() == SLIPS_SET_END .and. (Get_TdsConnectionModes()==TDS_CONNECTION_SPINE .or. Get_TdsConnectionModes()==TDS_CONNECTION_STRING) ) then
        data%State%Drawworks%Speed = 0.d0
    end if
    
    
    
!===> Closed BOP Rams , No Motion
    if ( data%State%Drawworks%ShearBopSituation==1 .and. (any(data%State%Drawworks%DrillModeCond==(/3,10,19,20,24/))) ) then
        data%State%Drawworks%Speed = 0.d0
    end if
    
    
    
    
end subroutine Drawworks_Inputs