SimulationCore2/Equipments/BopStack/PIPE_RAM2.f90

 

SUBROUTINE PIPE_RAMS2
    USE VARIABLES
    USE CBopStackVariables
    USE CBopControlPanelVariables
    USE CEquipmentsConstants
    ! USE CSimulationVariables
    implicit none
    
   
  !write(*,*) 'checkpoint 1'
    
!=====================================================================
!                 PIPE RAMS 2- BOP CAMERON Type U 5000
!                   START CONDITIONS FOR PIPE RAMS 2
!=====================================================================   
        RAM(3)%SuccessionCounter = RAM(3)%SuccessionCounter + 1    
    
    
       if (LowerRamsValve == 1.0 .and. LowerRamsFailureMalf==0 .and. RigAirMalf==0 .and. AirMasterValve==1) then
    !write(*,*) 'close 1'
           
           
             if (LowerRamsCloseLEDMine == LedOn) then 
                 RETURN            
             end if 
           
           
            if ( RAM(3)%SuccessionCounter /= RAM(3)%SuccessionCounterOld+1 ) then
                RAM(3)%SuccessionCounter = 0   ! also in starup
                RAM(3)%SuccessionCounterOld = 0   ! also in starup
                !return   
            else
                RAM(3)%SuccessionCounterOld= RAM(3)%SuccessionCounter        
            endif
        
        
            if ( RAM(3)%SuccessionCounter >= int(2.5/DeltaT_BOP) ) then
                !return
                
                RAM(3)%First_CloseTimecheck= 1 
                
                LowerRamsOpenLED = LedOff
                LowerRamsOpenLEDMine = LedOff
                LowerRamsCloseLED = LedOn    !LedBlinking  
            
                RAM(3)%FourwayValve = 1
               
            endif
           

       endif
       
       
       
       if (RAM(3)%FourwayValve == 1 .and. p_acc>acc_MinPressure) then    ! 1: Open , 0: Close
    !write(*,*) 'close 2'
           
         
           
            RAM(3)%FourwayValve = 0
           
            PipeRam2_closed=0
            !PipeRam2_closed_withPossibility= PipeRam2_closed * TD_BOPConnectionPossibility(4)
            RAM(3)%vdis_tot=0
            RAM(3)%vdis_bottles=0.
            RAM(3)%fvr_air=0.
            RAM(3)%vdis_elecp=0.
            Qiter=7
            RAM(3)%Qzero=70
            RAM(3)%Q=RAM(3)%Qzero
            RAM(3)%flow=70
            RAM(3)%tol=0.0037
            if (finished_pipe2==1) then
               PipeRams2LeverOld=-1.0
           else
               PipeRams2LeverOld=LowerRamsValve
           endif
           finished_pipe2=0
            PipeRam2IsClosing = .true.
            PipeRam2IsOpening = .false.
            

            RAM(3)%bop_type = 3
            !AbopPipeRam=196.67
            AbopPipeRam=(LowerRamClose*231)/((IDPipeRamBase-ODDrillpipe_inPipeRam1Base)/2.)
            NeededVolumePipeRams2=AbopPipeRam*(IDPipeRamBase-max(ODDrillpipe_inPipeRam2,ODDrillpipe_inPipeRam1Base))/(2.*231)  !galon for each BOP
              !write(*,*) 'close 1'
        endif
       
        if (LowerRamsValve == -1.0 .and. LowerRamsFailureMalf==0 .and. RigAirMalf==0 .and. AirMasterValve==1) then
    !write(*,*) 'open 1'
            
             if (LowerRamsOpenLEDMine == LedOn) then 
                 RETURN            
             end if  
            
            
            if ( RAM(3)%SuccessionCounter /= RAM(3)%SuccessionCounterOld+1 ) then
                RAM(3)%SuccessionCounter = 0   ! also in starup
                RAM(3)%SuccessionCounterOld = 0   ! also in starup
                !return   
            else
                RAM(3)%SuccessionCounterOld= RAM(3)%SuccessionCounter
            endif
        
        
            if ( RAM(3)%SuccessionCounter >= int(2.5/DeltaT_BOP) ) then
                !return
                
                RAM(3)%First_OpenTimecheck= 1   
               
                LowerRamsCloseLed = LedOff    !new
                LowerRamsCloseLedMine = LedOff    !new
                LowerRamsOpenLED = LedOn    !LedBlinking         
         
                RAM(3)%FourwayValve = 1
                
            endif
               
         
        endif
        
        
        if (RAM(3)%FourwayValve == 1 .and. p_acc>acc_MinPressure) then    ! 1: Open , 0: Close
    !write(*,*) 'open 2'
            
            RAM(3)%FourwayValve = 0
         
            PipeRam2_closed=0
            !PipeRam2_closed_withPossibility= PipeRam2_closed * TD_BOPConnectionPossibility(4)
            RAM(3)%vdis_tot=0
            RAM(3)%vdis_bottles=0.
            RAM(3)%fvr_air=0.
            RAM(3)%vdis_elecp=0.
            Qiter=7
            RAM(3)%Qzero=70
            RAM(3)%Q=RAM(3)%Qzero
            RAM(3)%flow=70
            RAM(3)%tol=0.0037

                if (finished_pipe2==1) then
                    PipeRams2LeverOld=1.0
                else
                    PipeRams2LeverOld=LowerRamsValve
                endif
            finished_pipe2=0
            PipeRam2IsOpening = .true.
            PipeRam2IsClosing = .false.          

        
         !if (LowerRamsOpenLED == LedOn) then 
         !    RETURN            
         !end if
            

            RAM(3)%bop_type = 3
            !AbopPipeRam=186.5
            AbopPipeRam=(LowerRamOpen*231)/((IDPipeRamBase-ODDrillpipe_inPipeRam1Base)/2.)
            NeededVolumePipeRams2=AbopPipeRam*(IDPipeRamBase-max(ODDrillpipe_inPipeRam2,ODDrillpipe_inPipeRam1Base))/(2.*231)  !galon for each BOP
              !write(*,*) 'open 1'
            
        endif 
        
       
!=====================================================================    
    
    
if (PipeRam2IsOpening .or. PipeRam2IsClosing .or. RAM(3)%Bottles_Charged_MalfActive) then
    
        CALL PIPE_RAMS2_SUB
end if    
    
    
    END SUBROUTINE PIPE_RAMS2 
    

    
    
    
    
    
    
    
    
    
    
SUBROUTINE PIPE_RAMS2_SUB    
    
    USE VARIABLES
    USE CBopStackVariables
    USE CBopControlPanelVariables
    USE CEquipmentsConstants
    USE CSimulationVariables
    implicit none
    
    
    FirstSet= 0
    RamsFirstSet= 0
    
    loop4: do while (finished_pipe2==0)
        
  !write(*,*) 'checkpoint 2'
        
        
             RAM(3)%SuccessionCounter = RAM(3)%SuccessionCounter + 1
        
        
           if (LowerRamsValve == 1.0 .and. PipeRams2LeverOld == -1.0 .and. LowerRamsFailureMalf==0 .and. RigAirMalf==0 .and. AirMasterValve==1) then
               
    !write(*,*) 'close 3'
               
                if ( RAM(3)%First_CloseTimecheck == 0 ) then 
                    
                    
                    if ( RAM(3)%SuccessionCounter /= RAM(3)%SuccessionCounterOld+1 ) then
                        RAM(3)%SuccessionCounter = 0   ! also in starup
                        RAM(3)%SuccessionCounterOld = 0   ! also in starup
                        !return   
                    else
                        RAM(3)%SuccessionCounterOld= RAM(3)%SuccessionCounter        
                    endif
        

        
                    if ( RAM(3)%SuccessionCounter >= int(2.5/DeltaT_BOP) ) then
                        !return
                        
                        LowerRamsOpenLED = LedOff
                        LowerRamsOpenLEDMine = LedOff
                        LowerRamsCloseLED = LedOn    !LedBlinking
                
                        RAM(3)%FourwayValve = 1                        
                        
                    endif
           
                endif
                
                

                
           endif
           
        if (RAM(3)%FourwayValve == 1 .and. p_acc>acc_MinPressure) then
    !write(*,*) 'close 4'
            
            RAM(3)%FourwayValve = 0
           

               PipeRam2_closed=0
               !PipeRam2_closed_withPossibility= PipeRam2_closed * TD_BOPConnectionPossibility(4)
            RAM(3)%p_bop=pa
            PipeRams2LeverOld = LowerRamsValve

            CALL OpenLowerRams
            PipeRam2_Situation_forTD= 0       ! open - for TD code
            RAM(3)%bop_type = 3
            !AbopPipeRam=196.67
            AbopPipeRam=(LowerRamClose*231)/((IDPipeRamBase-ODDrillpipe_inPipeRam1Base)/2.)
            NeededVolumePipeRams2=AbopPipeRam*(IDPipeRam2-max(ODDrillpipe_inPipeRam2,ODDrillpipe_inPipeRam1Base))/(2.*231)
            
            RAM(3)%vdis_bottles=0.
            RAM(3)%fvr_air=0.
            RAM(3)%vdis_elecp=0.
            PipeRam2IsClosing = .true.
            PipeRam2IsOpening = .false.
              !write(*,*) 'close 2'
            
        endif
        
        if (LowerRamsValve == -1.0 .and. PipeRams2LeverOld == 1.0 .and. LowerRamsFailureMalf==0 .and. RigAirMalf==0 .and. AirMasterValve==1) then 
    !write(*,*) 'open 3'
            
          
                if ( RAM(3)%First_OpenTimecheck == 0 ) then

                    if ( RAM(3)%SuccessionCounter /= RAM(3)%SuccessionCounterOld+1 ) then
                        RAM(3)%SuccessionCounter = 0   ! also in starup
                        RAM(3)%SuccessionCounterOld = 0   ! also in starup
                        !return   
                    else
                        RAM(3)%SuccessionCounterOld= RAM(3)%SuccessionCounter        
                    endif
        
                    if ( RAM(3)%SuccessionCounter >= int(2.5/DeltaT_BOP) ) then
                        !return
                        
                        LowerRamsCloseLED = LedOff
                        LowerRamsCloseLEDMine = LedOff
                        LowerRamsOpenLED = LedOn    !LedBlinking 
            
                        RAM(3)%FourwayValve = 1
            
                    endif
           
                endif  
                
            
        endif
        
        
        if (RAM(3)%FourwayValve == 1 .and. p_acc>acc_MinPressure) then
    !write(*,*) 'open 4'
            
            RAM(3)%FourwayValve = 0
            
            PipeRam2_closed=0
            !PipeRam2_closed_withPossibility= PipeRam2_closed * TD_BOPConnectionPossibility(4)
            RAM(3)%p_bop=pa
            PipeRams2LeverOld = LowerRamsValve

            CALL OpenLowerRams
            PipeRam2_Situation_forTD= 0       ! open - for TD code
            RAM(3)%bop_type = 3
            !AbopPipeRam=186.5
            AbopPipeRam=(LowerRamOpen*231)/((IDPipeRamBase-ODDrillpipe_inPipeRam1Base)/2.)
            NeededVolumePipeRams2=AbopPipeRam*(IDPipeRamBase-IDPipeRam2)/(2.*231)
            RAM(3)%vdis_bottles=0.
            RAM(3)%fvr_air=0.
            RAM(3)%vdis_elecp=0.

            PipeRam2IsOpening = .true.
            PipeRam2IsClosing = .false.
              !write(*,*) 'open 2'
            
        endif
        
        
            RAM(3)%First_CloseTimecheck = 0
            RAM(3)%First_OpenTimecheck = 0
 
 
     RAM(3)%time=RAM(3)%time+DeltaT_BOP  !overal time (s)

 

!===================================================
!                        BOP 
!===================================================
if (PipeRam2_closed==0) then    !bop closing
!write(*,*) 'BOP code is called'
     call bop_code(3,H_PipeRam2Bop,3)   !ramtype=3      3=RNUMBER
endif    !bop is closing
!================================================================
if (PipeRam2_closed==1) then
    RAM(3)%Q=0
    !p_bop=pram_reg
    RAM(3)%p_bop=pa
    RAMS%minloss(3,17)=0.       !RNUMBER=3
endif

RAM(3)%timecounter_ram=RAM(3)%timecounter_ram+1





!        MiddleRamsStatus = IDshearBop
!        UpperRamsStatus = IDPipeRam1
!        LowerRamsStatus = IDPipeRam2
!        AnnularStatus = IDAnnular
!        AccumulatorPressureGauge = p_acc
!        ManifoldPressureGauge= pram_reg
!        AnnularPressureGauge=Pannular_reg
!
!        
!
!         WRITE(60,60) RAM(3)%time,RAM(3)%Q,RAM(3)%vdis_tot,p_acc, &
!         pram_reg,Pannular_reg,RAM(3)%p_bop,IDshearBop, &
!         IDPipeRam1,IDPipeRam2,IDAnnular
!60       FORMAT(11(f18.5))
         
         
          call sleepqq(100)
          
if (PipeRam2_closed==1) then
    
!    if ((MiddleRamsValve==1. .and. MiddleRamsFailureMalf==0) .or. (MiddleRamsValve==-1.0 .and. MiddleRamsFailureMalf==0) .or. (UpperRamsValve==1. .and. UpperRamsFailureMalf==0) .or. (UpperRamsValve==-1.0 .and. UpperRamsFailureMalf==0) .or. (AnnularValve==1. .and. AnnularFailureMalf==0) .or. (AnnularValve==-1.0 .and. AnnularFailureMalf==0) .or. ChokeLineValve==1. .or. ChokeLineValve==-1.0 .or. KillLineValve==1. .or. KillLineValve==-1.0) then
        finished_pipe2=1
!    endif
endif          
          
          if (IsStopped == .true.) return 

          
    end do  loop4   !while finished_pipe2==0
    
    if ( finished_pipe2==1 .and. RAM(3)%Bottles_Charged_MalfActive==.true.) then
        call bop_code(3,H_PipeRam2Bop,3)   !ramtype=3      3=RNUMBER
        call sleepqq(100)
    endif    
    
    
    
    
END SUBROUTINE PIPE_RAMS2_SUB