module CSimulation
    ! use CSimulationVariables
    use CSimulationThreads
    use ifcore
    use ifmt
    implicit none    
    public
    
    
    contains

    subroutine InitThreads
        implicit none
        
#ifdef EnableSimulation
        !BopStack
        BopStackThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            BopStackThread, &
            loc(BopStackThreadParam), &
            CREATE_SUSPENDED, &
            BopStackThreadId )
        
        !Pumps
        Pump1ThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            Pump1Thread, &
            loc(Pump1ThreadParam), &
            CREATE_SUSPENDED, &
            Pump1ThreadId )
        Pump2ThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            Pump2Thread, &
            loc(Pump2ThreadParam), &
            CREATE_SUSPENDED, &
            Pump2ThreadId )
        Pump3ThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            Pump3Thread, &
            loc(Pump3ThreadParam), &
            CREATE_SUSPENDED, &
            Pump3ThreadId )
        
        
        !ChokeControl
        ChokeControlThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            ChokeControlThread, &
            loc(ChokeControlThreadParam), &
            CREATE_SUSPENDED, &
            ChokeControlThreadId )
        
        !ROP
        RopThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            RopThread, &
            loc(RopThreadParam), &
            CREATE_SUSPENDED, &
            RopThreadId )
        
        !Geo
        GeoThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            GeoThread, &
            loc(GeoThreadParam), &
            CREATE_SUSPENDED, &
            GeoThreadId )
        
        !RotaryTable
        RotaryTableThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            RotaryTableThread, &
            loc(RotaryTableThreadParam), &
            CREATE_SUSPENDED, &
            RotaryTableThreadId )
        
        
        !Drawworks
        DrawworksThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            DrawworksThread, &
            loc(DrawworksThreadParam), &
            CREATE_SUSPENDED, &
           DrawworksThreadId )
                
        !FluidFlow
        FluidFlowThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            FluidFlowThread, &
            loc(FluidFlowThreadParam), &
            CREATE_SUSPENDED, &
            FluidFlowThreadId )
        
        
        !TorqueDrag
        TorqueDragThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            TorqueDragThread, &
            loc(TorqueDragThreadParam), &
            CREATE_SUSPENDED, &
           TorqueDragThreadId )
        
        !TopDrive
        TopDriveThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            TopDriveThread, &
            loc(TopDriveThreadParam), &
            CREATE_SUSPENDED, &
           TopDriveThreadId )
        
        !MudSystem
        MudSystemThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            MudSystemThread, &
            loc(MudSystemThreadParam), &
            CREATE_SUSPENDED, &
           MudSystemThreadId )
        
        !PipeRams1
        PipeRams1ThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            PipeRams1Thread, &
            loc(PipeRams1ThreadParam), &
            CREATE_SUSPENDED, &
           PipeRams1ThreadId )
        
        !PipeRams2
        PipeRams2ThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            PipeRams2Thread, &
            loc(PipeRams2ThreadParam), &
            CREATE_SUSPENDED, &
           PipeRams2ThreadId )
        
        !KillLine
        KillLineThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            KillLineThread, &
            loc(KillLineThreadParam), &
            CREATE_SUSPENDED, &
           KillLineThreadId )
        
        !ChokeLine
        ChokeLineThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            ChokeLineThread, &
            loc(ChokeLineThreadParam), &
            CREATE_SUSPENDED, &
           ChokeLineThreadId )
        
        !BlindRams
        BlindRamsThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            BlindRamsThread, &
            loc(BlindRamsThreadParam), &
            CREATE_SUSPENDED, &
           BlindRamsThreadId )
        
        !Annular
        AnnularThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            AnnularThread, &
            loc(AnnularThreadParam), &
            CREATE_SUSPENDED, &
           AnnularThreadId )
        
        
        !OperationScenarios
        OperationScenariosThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            OperationScenariosThread, &
            loc(OperationScenariosThreadParam), &
            CREATE_SUSPENDED, &
           OperationScenariosThreadId )
        
        !PathFinding
        PathFindingThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            PathFindingThread, &
            loc(PathFindingThreadParam), &
            CREATE_SUSPENDED, &
           PathFindingThreadId )
        
        
        !Sample
        SampleThreadHandle = CreateThread( &
            ThreadSecurity, &
            ThreadStackSize, &
            SampleThread, &
            loc(SampleThreadParam), &
            CREATE_SUSPENDED, &
            SampleThreadId )

#endif

    end subroutine InitThreads
    
    subroutine StopThreads
        implicit none
        
#ifdef EnableSimulation
        !BopStack
#ifdef HardStop
        ApiResult = TerminateThread(BopStackThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(BopStackThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(BopStackThreadHandle)
        
        
        
        
        !Pump 1
#ifdef HardStop
        ApiResult = TerminateThread(Pump1ThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(Pump1ThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(Pump1ThreadHandle)
        
        !Pump 2
#ifdef HardStop
        ApiResult = TerminateThread(Pump2ThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(Pump2ThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(Pump2ThreadHandle)
    
        !Pump 3
#ifdef HardStop
        ApiResult = TerminateThread(Pump3ThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(Pump3ThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(Pump3ThreadHandle)
        
        
        !ChokeControl
#ifdef HardStop
        ApiResult = TerminateThread(ChokeControlThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(ChokeControlThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(ChokeControlThreadHandle)
        
        !ROP
#ifdef HardStop
        ApiResult = TerminateThread(RopThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(RopThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(RopThreadHandle)
        
        !Geo
#ifdef HardStop
        ApiResult = TerminateThread(GeoThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(GeoThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(GeoThreadHandle)
        
        !RotaryTable
#ifdef HardStop
        ApiResult = TerminateThread(RotaryTableThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(RotaryTableThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(RotaryTableThreadHandle)
        
        
        !Drawworks
#ifdef HardStop
        ApiResult = TerminateThread(DrawworksThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(DrawworksThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(DrawworksThreadHandle)
                
        !FluidFlow
#ifdef HardStop
        ApiResult = TerminateThread(FluidFlowThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(FluidFlowThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(FluidFlowThreadHandle)
        
        
        !TorqueDrag
#ifdef HardStop
        ApiResult = TerminateThread(TorqueDragThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(TorqueDragThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(TorqueDragThreadHandle)
        
        
        !TopDrive
#ifdef HardStop
        ApiResult = TerminateThread(TopDriveThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(TopDriveThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(TopDriveThreadHandle)
        
        
 
        !MudSystem
#ifdef HardStop
        ApiResult = TerminateThread(MudSystemThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(MudSystemThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(MudSystemThreadHandle)
        
        !PipeRams1
#ifdef HardStop
        ApiResult = TerminateThread(PipeRams1ThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(PipeRams1ThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(PipeRams1ThreadHandle)
        
        !PipeRams2
#ifdef HardStop
        ApiResult = TerminateThread(PipeRams2ThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(PipeRams2ThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(PipeRams2ThreadHandle)
        
        !KillLine
#ifdef HardStop
        ApiResult = TerminateThread(KillLineThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(KillLineThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(KillLineThreadHandle)
        
        !ChokeLine
#ifdef HardStop
        ApiResult = TerminateThread(ChokeLineThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(ChokeLineThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(ChokeLineThreadHandle)
        
        !BlindRams
#ifdef HardStop
        ApiResult = TerminateThread(BlindRamsThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(BlindRamsThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(BlindRamsThreadHandle)
        
        !Annular
#ifdef HardStop
        ApiResult = TerminateThread(AnnularThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(AnnularThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(AnnularThreadHandle)
        
        
        !OperationScenarios
#ifdef HardStop
        ApiResult = TerminateThread(OperationScenariosThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(OperationScenariosThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(OperationScenariosThreadHandle)
        
        !PathFinding
#ifdef HardStop
        ApiResult = TerminateThread(PathFindingThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(PathFindingThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(PathFindingThreadHandle)
        
        
        
        
        
        
        !Sample
#ifdef HardStop
        ApiResult = TerminateThread(SampleThreadHandle, 0)
#else
        !ApiResult = WaitForSingleObject(SampleThreadHandle, WaitForStopMs)
#endif
        ApiResult = CloseHandle(SampleThreadHandle)
        
#endif











        
    end subroutine StopThreads
    
    subroutine Initialization(portable)
    !DEC$ ATTRIBUTES DLLEXPORT::Initialization
    !DEC$ ATTRIBUTES ALIAS: 'Initialization' :: Initialization
        use BopStackMain
        use PumpsMain
        use ChokeControlMain
        use RopMain
        use RotaryTableMain
        use DrawworksMain
        use FluidFlowMain
        use TorqueDragMain
        use MudSystemMain
        use PipeRams1Main
        use PipeRams2Main
        use KillLineMain
        use ChokeLineMain
        use BlindRamsMain
        use AnnularMain
        use TopDriveMain
        use GeoMain
        
        use COperationScenariosMain
        use CManifolds
        implicit none
        logical, intent(in) :: portable
        IsPortable = portable
        if(portable) then
            IsPortableInt = 1
            !print*, 'IsPortableInt=', IsPortableInt 
        else
            IsPortableInt = 0
            !print*, 'IsPortableInt=', IsPortableInt 
        endif
        
        call BopStack_Setup()
        call Pump1_Setup()
        call Pump2_Setup()
        call Pump3_Setup()
        call ChokeControl_Setup()
        call Rop_Setup()
        call RotaryTable_Setup()
        call Drawworks_Setup()
        call FluidFlow_Setup()
        call TorqueDrag_Setup()
        call MudSystem_Setup()
        call PipeRams1_Setup()
        call PipeRams2_Setup()
        call KillLine_Setup()
        call ChokeLine_Setup()
        call BlindRams_Setup()
        call Annular_Setup()
        call TopDrive_Setup()
        call Geo_Setup()
        
        call OperationScenarios_Setup()        
        call PathFinding_Setup()
        
        call Sample_Setup()
        
        call OnSimulationInitialization%RunAll()
        
        call InitThreads()
        
        
        call OnBopStackPause%Add(BopStack_Thread)
        call OnPump1Pause%Add(Pump1_Thread)
        call OnPump2Pause%Add(Pump2_Thread)
        call OnPump3Pause%Add(Pump3_Thread)
        call OnChokeControlPause%Add(ChokeControl_Thread)
        call OnRopPause%Add(Rop_Thread)
        call OnRotaryTablePause%Add(RotaryTable_Thread)
        call OnDrawworksPause%Add(Drawworks_Thread)
        call OnFluidFlowPause%Add(FluidFlow_Thread)
        call OnTorqueDragPause%Add(TorqueDrag_Thread)
        call OnMudSystemPause%Add(MudSystem_Thread)
        call OnPipeRams1Pause%Add(PipeRams1_Thread)
        call OnPipeRams2Pause%Add(PipeRams2_Thread)
        call OnKillLinePause%Add(KillLine_Thread)
        call OnChokeLinePause%Add(ChokeLine_Thread)
        call OnBlindRamsPause%Add(BlindRams_Thread)
        call OnAnnularPause%Add(Annular_Thread)
        call OnGeoPause%Add(Geo_Thread)
        
        call OnSamplePause%Add(Sample_Thread)
        
        TotalStrokesPtr => TotalStrokesDue
        TotalVolumePumpedPtr => TotalVolumePumpedDue
        DistanceDrilledPtr => DistanceDrilledDue
        
        !TODO: CHANGE LATER
        call DrillMode_ON()
        
    end subroutine Initialization
    
    subroutine StartSimulation
    !DEC$ ATTRIBUTES DLLEXPORT::StartSimulation
    !DEC$ ATTRIBUTES ALIAS: 'StartSimulation' :: StartSimulation
        implicit none
        
        if(SimulationState_old == SimulationState_Stopped) call OnSimulationStart%RunAll()
        IsStopped = .false.
        SimulationState = SimulationState_Started
        SimulationState_old = SimulationState_Started
        
        BopStackStarted = .false.
        Pump1Started = .false.
        Pump2Started = .false.
        Pump3Started = .false.
        ChokeControlStarted = .false.
        RopStarted = .false.
        RotaryTableStarted = .false.
        DrawworksStarted = .false.
        FluidFlowStarted = .false.
        TorqueDragStarted = .false.
        MudSystemStarted = .false.
        PipeRams1Started = .false.
        PipeRams2Started = .false.
        KillLineStarted = .false.
        ChokeLineStarted = .false.
        BlindRamsStarted = .false.
        AnnularStarted = .false.
        GeoStarted = .false.
        
        SampleStarted = .false.
        
        
#ifdef EnableSimulation

#ifdef M_BopStack
        ApiResult = ResumeThread(BopStackThreadHandle)
#endif
        
#ifdef M_Pump1
        ApiResult = ResumeThread(Pump1ThreadHandle)
#endif
#ifdef M_Pump2
        ApiResult = ResumeThread(Pump2ThreadHandle)
#endif
#ifdef M_Pump3
        ApiResult = ResumeThread(Pump3ThreadHandle)
#endif
        
        
#ifdef M_ChokeControl
        ApiResult = ResumeThread(ChokeControlThreadHandle)
#endif
#ifdef M_Rop
        ApiResult = ResumeThread(RopThreadHandle)
#endif
#ifdef M_Geo
        ApiResult = ResumeThread(GeoThreadHandle)
#endif
#ifdef M_RotaryTable
        ApiResult = ResumeThread(RotaryTableThreadHandle)
#endif
        
#ifdef M_Drawworks
        ApiResult = ResumeThread(DrawworksThreadHandle)
#endif      
#ifdef M_FluidFlow
        ApiResult = ResumeThread(FluidFlowThreadHandle)
#endif
        
#ifdef M_TorqueDrag
        ApiResult = ResumeThread(TorqueDragThreadHandle)
#endif

#ifdef M_TopDrive
        ApiResult = ResumeThread(TopDriveThreadHandle)
#endif
        
#ifdef M_MudSystem
        ApiResult = ResumeThread(MudSystemThreadHandle)
#endif
#ifdef M_PipeRams1
        ApiResult = ResumeThread(PipeRams1ThreadHandle)
#endif
#ifdef M_PipeRams2
        ApiResult = ResumeThread(PipeRams2ThreadHandle)
#endif
#ifdef M_KillLine
        ApiResult = ResumeThread(KillLineThreadHandle)
#endif
#ifdef M_ChokeLine
        ApiResult = ResumeThread(ChokeLineThreadHandle)
#endif
#ifdef M_BlindRams
        ApiResult = ResumeThread(BlindRamsThreadHandle)
#endif
#ifdef M_Annular
        ApiResult = ResumeThread(AnnularThreadHandle)
#endif
        
        !OperationScenarios
        ApiResult = ResumeThread(OperationScenariosThreadHandle)
        
        !PathFinding
        ApiResult = ResumeThread(PathFindingThreadHandle)
        
#ifdef M_Sample
        ApiResult = ResumeThread(SampleThreadHandle)
#endif
        
#endif
    end subroutine StartSimulation
        
    subroutine StopSimulation
    !DEC$ ATTRIBUTES DLLEXPORT::StopSimulation
    !DEC$ ATTRIBUTES ALIAS: 'StopSimulation' :: StopSimulation
        use CDrillingConsoleVariables!, only: DrillingConsole%MP1CPSwitchI, DrillingConsole%MP2SwitchI, DrillingConsole%MP1CPSwitch, DrillingConsole%MP2Switch, DrillingConsole%MP1Throttle, DrillingConsole%MP2Throttle, DrillingConsole%MP1ThrottleUpdate, DrillingConsole%MP2ThrottleUpdate
        implicit none
        DrillingConsole%MP1CPSwitchI = 0
        DrillingConsole%MP1CPSwitch = 0
        DrillingConsole%MP2SwitchI = 0
        DrillingConsole%MP2Switch = .false.
        DrillingConsole%MP1ThrottleUpdate = .false.
        DrillingConsole%MP2ThrottleUpdate = .false.
        DrillingConsole%MP1Throttle = -1.0
        DrillingConsole%MP2Throttle = -1.0
        !MP1Throttle = 0.0
        !MP2Throttle = 0.0
        
        IsSnapshot = .false.
        IsStopped = .true.
        TotalPumpStrokes = 0 
        TotalVolumePumped = 0
        DistanceDrilled = 0
        SimulationState = SimulationState_Stopped
        SimulationState_old = SimulationState_Stopped
        call OnSimulationStop%RunAll()
        call StopThreads()
        call InitThreads()
    end subroutine StopSimulation
    
    subroutine PauseSimulation
        implicit none
        if(SimulationState_old == SimulationState_Stopped) then
            SimulationState_old = SimulationState_Started
            return
        endif
        SimulationState_old = SimulationState_Paused
#ifdef EnableSimulation
        !BopStack
        ApiResult = SuspendThread(BopStackThreadHandle)
        
        !Pumps
        ApiResult = SuspendThread(Pump1ThreadHandle)
        ApiResult = SuspendThread(Pump2ThreadHandle)
        ApiResult = SuspendThread(Pump3ThreadHandle)
        
        
        !ChokeControl
        ApiResult = SuspendThread(ChokeControlThreadHandle)
        
        !ROP
        ApiResult = SuspendThread(RopThreadHandle)
        
        !Geo
        ApiResult = SuspendThread(GeoThreadHandle)
        
        !RotaryTable
        ApiResult = SuspendThread(RotaryTableThreadHandle)
        
        
        !Drawworks
        ApiResult = SuspendThread(DrawworksThreadHandle)
                
        !FluidFlow
        ApiResult = SuspendThread(FluidFlowThreadHandle)
        
        
        !TorqueDrag
        ApiResult = SuspendThread(TorqueDragThreadHandle)
        
        
        !TopDrive
        ApiResult = SuspendThread(TopDriveThreadHandle)
        
        !MudSystem
        ApiResult = SuspendThread(MudSystemThreadHandle)
        
        !PipeRams1
        ApiResult = SuspendThread(PipeRams1ThreadHandle)
        
        !PipeRams2
        ApiResult = SuspendThread(PipeRams2ThreadHandle)
        
        !KillLine
        ApiResult = SuspendThread(KillLineThreadHandle)
        
        !ChokeLine
        ApiResult = SuspendThread(ChokeLineThreadHandle)
        
        !BlindRams
        ApiResult = SuspendThread(BlindRamsThreadHandle)
        
        !Annular
        ApiResult = SuspendThread(AnnularThreadHandle)
        
        
        !OperationScenarios
        ApiResult = SuspendThread(OperationScenariosThreadHandle)
        
        !PathFinding
        ApiResult = SuspendThread(PathFindingThreadHandle)
        
        
        
        !Sample
        ApiResult = SuspendThread(SampleThreadHandle)
#endif
        call OnSimulationPause%RunAll()
    end subroutine PauseSimulation
    
    logical function IsRunning()
    !DEC$ ATTRIBUTES DLLEXPORT :: IsRunning
    !DEC$ ATTRIBUTES ALIAS: 'IsRunning' :: IsRunning
        implicit none
        IsRunning = .not. IsStopped
    end function
       
    subroutine OnTimerTick(time, state)
    !DEC$ ATTRIBUTES DLLEXPORT :: OnTimerTick
    !DEC$ ATTRIBUTES ALIAS: 'OnTimerTick' :: OnTimerTick
        implicit none
        integer, intent(in) :: time
        integer, intent(in) :: state
        SimulationState = state
        SimulationTime = time 
    end subroutine
    
    subroutine TimerTick(s)
    !DEC$ ATTRIBUTES DLLEXPORT :: TimerTick
    !DEC$ ATTRIBUTES ALIAS: 'TimerTick' :: TimerTick
        use CBitProblemsVariables
        use CBopProblemsVariables
        use CChokeProblemsVariables
        use CDrillStemProblemsVariables
        use CGaugesProblemsVariables
        use CHoistingProblemsVariables
        use CLostProblemsVariables
        use CMudTreatmentProblemsVariables
        use COtherProblemsVariables
        use CPumpProblemsVariables
        use CRotaryProblemsVariables
        use CKickProblemsVariables
        use GeoMain
        implicit none
        integer, intent(in) :: s
        SimulationTime = s    
        call ProcessBitProblemsDueTime(s)
        call ProcessBopProblemsDueTime(s)
        call ProcessChokeProblemsDueTime(s)
        call ProcessDrillStemProblemsDueTime(s)
        call ProcessGaugesProblemsDueTime(s)
        call ProcessHoistingProblemsDueTime(s)
        call ProcessLostProblemsDueTime(s)
        call ProcessMudTreatmentProblemsDueTime(s)
        call ProcessOtherProblemsDueTime(s)
        call ProcessPumpProblemsDueTime(s)
        call ProcessRotaryProblemsDueTime(s)
        call ProcessKickProblemsDueTime(s)
        
#ifdef S_BopStack
        ApiResult = ResumeThread(BopStackThreadHandle)
#endif  
#ifdef S_Pump1
        ApiResult = ResumeThread(Pump1ThreadHandle)
#endif
#ifdef S_Pump2
        ApiResult = ResumeThread(Pump2ThreadHandle)
#endif
#ifdef S_Pump3
        ApiResult = ResumeThread(Pump3ThreadHandle)
#endif
#ifdef S_ChokeControl
        ApiResult = ResumeThread(ChokeControlThreadHandle)
#endif
#ifdef S_Rop
        ApiResult = ResumeThread(RopThreadHandle)
#endif
#ifdef S_RotaryTable
        ApiResult = ResumeThread(RotaryTableThreadHandle)
#endif
#ifdef S_Drawworks
        ApiResult = ResumeThread(DrawworksThreadHandle)
#endif
#ifdef S_FluidFlow
        ApiResult = ResumeThread(FluidFlowThreadHandle)
#endif
#ifdef S_TorqueDrag
        ApiResult = ResumeThread(TorqueDragThreadHandle)
#endif
#ifdef S_TopDrive
        ApiResult = ResumeThread(TopDriveThreadHandle)
#endif
#ifdef S_MudSystem
        ApiResult = ResumeThread(MudSystemThreadHandle)
#endif
#ifdef S_PipeRams1
        ApiResult = ResumeThread(PipeRams1ThreadHandle)
#endif
#ifdef S_PipeRams2
        ApiResult = ResumeThread(PipeRams2ThreadHandle)
#endif
#ifdef S_KillLine
        ApiResult = ResumeThread(KillLineThreadHandle)
#endif
#ifdef S_ChokeLine
        ApiResult = ResumeThread(ChokeLineThreadHandle)
#endif
#ifdef S_BlindRams
        ApiResult = ResumeThread(BlindRamsThreadHandle)
#endif
#ifdef S_Annular ت
        ApiResult = ResumeThread(AnnularThreadHandle)
#endif
#ifdef S_Geo
        ApiResult = ResumeThread(GeoThreadHandle)
#endif
        

        
#ifdef S_Sample
        ApiResult = ResumeThread(SampleThreadHandle)
#endif
        
    end subroutine
    
    subroutine StateChanged(state)
    !DEC$ ATTRIBUTES DLLEXPORT :: StateChanged
    !DEC$ ATTRIBUTES ALIAS: 'StateChanged' :: StateChanged
        implicit none
        integer, intent(in) :: state
        SimulationState = state 
        if(SimulationState == SimulationState_Paused) call PauseSimulation()
    end subroutine
    
    subroutine SetSimulationSpeed(speed)
    !DEC$ ATTRIBUTES DLLEXPORT :: SetSimulationSpeed
    !DEC$ ATTRIBUTES ALIAS: 'SetSimulationSpeed' :: SetSimulationSpeed
        implicit none
        integer, intent(in) :: speed
        SimulationSpeed = speed
    end subroutine
        
    
    subroutine SetSnapshot(s)
    !DEC$ ATTRIBUTES DLLEXPORT::SetSnapshot
    !DEC$ ATTRIBUTES ALIAS: 'SetSnapshot' :: SetSnapshot
        implicit none
        logical, intent(in) :: s
        IsSnapshot = s
        !if(IsSnapshot) SimulationState_old = SimulationState_Started
    end subroutine SetSnapshot
    
    
    subroutine TotalStrokesDue(strokes)
        use CBitProblemsVariables
        use CBopProblemsVariables
        use CChokeProblemsVariables
        use CDrillStemProblemsVariables
        use CGaugesProblemsVariables
        use CHoistingProblemsVariables
        use CLostProblemsVariables
        use CMudTreatmentProblemsVariables
        use COtherProblemsVariables
        use CPumpProblemsVariables
        use CRotaryProblemsVariables
        use CKickProblemsVariables
        implicit none
        integer, intent(in) :: strokes
        call ProcessBitProblemsDuePumpStrokes(strokes)
        call ProcessBopProblemsDuePumpStrokes(strokes)
        call ProcessChokeProblemsDuePumpStrokes(strokes)
        call ProcessDrillStemProblemsDuePumpStrokes(strokes)
        call ProcessGaugesProblemsDuePumpStrokes(strokes)
        call ProcessHoistingProblemsDuePumpStrokes(strokes)
        call ProcessLostProblemsDuePumpStrokes(strokes)
        call ProcessMudTreatmentProblemsDuePumpStrokes(strokes)
        call ProcessOtherProblemsDuePumpStrokes(strokes)
        call ProcessPumpProblemsDuePumpStrokes(strokes)
        call ProcessRotaryProblemsDuePumpStrokes(strokes)
        call ProcessKickProblemsDuePumpStrokes(strokes)
        
    end subroutine
    
    subroutine TotalVolumePumpedDue(volume)
        use CBitProblemsVariables
        use CBopProblemsVariables
        use CChokeProblemsVariables
        use CDrillStemProblemsVariables
        use CGaugesProblemsVariables
        use CHoistingProblemsVariables
        use CLostProblemsVariables
        use CMudTreatmentProblemsVariables
        use COtherProblemsVariables
        use CPumpProblemsVariables
        use CRotaryProblemsVariables
        use CKickProblemsVariables
        implicit none
        real(8), intent(in) :: volume     
        call ProcessBitProblemsDueVolumePumped(volume)
        call ProcessBopProblemsDueVolumePumped(volume)
        call ProcessChokeProblemsDueVolumePumped(volume)
        call ProcessDrillStemProblemsDueVolumePumped(volume)
        call ProcessGaugesProblemsDueVolumePumped(volume)
        call ProcessHoistingProblemsDueVolumePumped(volume)
        call ProcessLostProblemsDueVolumePumped(volume)
        call ProcessMudTreatmentProblemsDueVolumePumped(volume)
        call ProcessOtherProblemsDueVolumePumped(volume)
        call ProcessPumpProblemsDueVolumePumped(volume)
        call ProcessRotaryProblemsDueVolumePumped(volume)
        call ProcessKickProblemsDueVolumePumped(volume)
        
    end subroutine
    
    subroutine DistanceDrilledDue(distance)
        use CBitProblemsVariables
        use CBopProblemsVariables
        use CChokeProblemsVariables
        use CDrillStemProblemsVariables
        use CGaugesProblemsVariables
        use CHoistingProblemsVariables
        use CLostProblemsVariables
        use CMudTreatmentProblemsVariables
        use COtherProblemsVariables
        use CPumpProblemsVariables
        use CRotaryProblemsVariables
        use CKickProblemsVariables
        implicit none
        real(8), intent(in) :: distance
        call ProcessBitProblemsDueDistanceDrilled(distance)
        call ProcessBopProblemsDueDistanceDrilled(distance)
        call ProcessChokeProblemsDueDistanceDrilled(distance)
        call ProcessDrillStemProblemsDueDistanceDrilled(distance)
        call ProcessGaugesProblemsDueDistanceDrilled(distance)
        call ProcessHoistingProblemsDueDistanceDrilled(distance)
        call ProcessLostProblemsDueDistanceDrilled(distance)
        call ProcessMudTreatmentProblemsDueDistanceDrilled(distance)
        call ProcessOtherProblemsDueDistanceDrilled(distance)
        call ProcessPumpProblemsDueDistanceDrilled(distance)
        call ProcessRotaryProblemsDueDistanceDrilled(distance)
        call ProcessKickProblemsDueDistanceDrilled(distance)
    end subroutine
    
    
    
    
    subroutine BopStack_Thread
        implicit none
        ApiResult = SuspendThread(BopStackThreadHandle)
    end subroutine BopStack_Thread
    
    subroutine Pump1_Thread
        implicit none
        ApiResult = SuspendThread(Pump1ThreadHandle)
    end subroutine Pump1_Thread
    
    subroutine Pump2_Thread
        implicit none
        ApiResult = SuspendThread(Pump2ThreadHandle)
    end subroutine Pump2_Thread
    
    subroutine Pump3_Thread
        implicit none
        ApiResult = SuspendThread(Pump3ThreadHandle)
    end subroutine Pump3_Thread
    
    subroutine ChokeControl_Thread
        implicit none
        ApiResult = SuspendThread(ChokeControlThreadHandle)
    end subroutine ChokeControl_Thread
    
    subroutine Rop_Thread
        implicit none
        ApiResult = SuspendThread(RopThreadHandle)
    end subroutine Rop_Thread
    
    subroutine RotaryTable_Thread
        implicit none
        ApiResult = SuspendThread(RotaryTableThreadHandle)
    end subroutine RotaryTable_Thread
    
    subroutine Drawworks_Thread
        implicit none
        ApiResult = SuspendThread(DrawworksThreadHandle)
    end subroutine Drawworks_Thread
    
    subroutine FluidFlow_Thread
        implicit none
        ApiResult = SuspendThread(FluidFlowThreadHandle)
    end subroutine FluidFlow_Thread
    
    subroutine TorqueDrag_Thread
        implicit none
        ApiResult = SuspendThread(TorqueDragThreadHandle)
    end subroutine TorqueDrag_Thread
    
    subroutine TopDrive_Thread
        implicit none
        ApiResult = SuspendThread(TopDriveThreadHandle)
    end subroutine TopDrive_Thread
    
    subroutine MudSystem_Thread
        implicit none
        ApiResult = SuspendThread(MudSystemThreadHandle)
    end subroutine MudSystem_Thread
    
    subroutine PipeRams1_Thread
        implicit none
        ApiResult = SuspendThread(PipeRams1ThreadHandle)
    end subroutine PipeRams1_Thread
    
    subroutine PipeRams2_Thread
        implicit none
        ApiResult = SuspendThread(PipeRams2ThreadHandle)
    end subroutine PipeRams2_Thread
    
    subroutine KillLine_Thread
        implicit none
        ApiResult = SuspendThread(KillLineThreadHandle)
    end subroutine KillLine_Thread
    
    subroutine ChokeLine_Thread
        implicit none
        ApiResult = SuspendThread(ChokeLineThreadHandle)
    end subroutine ChokeLine_Thread
    
    subroutine BlindRams_Thread
        implicit none
        ApiResult = SuspendThread(BlindRamsThreadHandle)
    end subroutine BlindRams_Thread
    
    subroutine Annular_Thread
        implicit none
        ApiResult = SuspendThread(AnnularThreadHandle)
    end subroutine Annular_Thread
    
    subroutine Geo_Thread
        implicit none
        ApiResult = SuspendThread(GeoThreadHandle)
    end subroutine Geo_Thread
    
    
    
    subroutine Sample_Thread
        implicit none  
        ApiResult = SuspendThread(SampleThreadHandle)
    end subroutine Sample_Thread
    
end module CSimulation