some other files are added

CSharp/BasicInputs/RigSpecifications/CPower.f90

@@ -29,5 +29,32 @@ module CPower
         call json%add(parent,p)
     end subroutine
 
+    subroutine PowerFromJson(parent)
+        use json_module,IK =>json_ik
+        type(json_value),pointer :: parent
+        type(json_core) :: json
+        type(json_value),pointer :: p,pitems,pitem,pval,pbit
+
+        call json%get(parent,'Power',p)
+
+        call json%get(p,"CementPump",pitem)
+		call json%get(pitem,data%Configuration%Power%CementPump)
+        call json%get(p,"Drawworks",pitem)
+		call json%get(pitem,data%Configuration%Power%Drawworks)
+        call json%get(p,"GeneratorPowerRating",pitem)
+		call json%get(pitem,data%Configuration%Power%GeneratorPowerRating)
+        call json%get(p,"MudPump1",pitem)
+		call json%get(pitem,data%Configuration%Power%MudPump1)
+        call json%get(p,"MudPump2",pitem)
+		call json%get(pitem,data%Configuration%Power%MudPump2)
+        call json%get(p,"NumberOfgenerators",pitem)
+		call json%get(pitem,data%Configuration%Power%NumberOfgenerators)
+        call json%get(p,"RotaryTable",pitem)
+		call json%get(pitem,data%Configuration%Power%RotaryTable)
+        call json%get(p,"TopDrive",pitem)
+		call json%get(pitem,data%Configuration%Power%TopDrive)
+
+    end subroutine
+
     
 end module CPower

CSharp/BasicInputs/RigSpecifications/CPumps.f90

@@ -55,6 +55,83 @@ module CPumps
         call json%add(parent,p)
     end subroutine
 
+    subroutine PumpsFromJson(parent)
+        use json_module,IK =>json_ik
+        type(json_value),pointer :: parent
+        type(json_core) :: json
+        type(json_value),pointer :: p,pitems,pitem,pval,pbit
+
+        call json%get(parent,'Pumps',p)
+
+        call json%get(p,"MudPump1LinerDiameter",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1LinerDiameter)
+        call json%get(p,"MudPump1Stroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1Stroke)
+        call json%get(p,"MudPump1MechanicalEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1MechanicalEfficiency)
+        call json%get(p,"MudPump1VolumetricEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1VolumetricEfficiency)
+        call json%get(p,"MudPump1Output",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1Output)
+        call json%get(p,"MudPump1OutputBblStroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1OutputBblStroke)
+        call json%get(p,"MudPump1Maximum",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1Maximum)
+        call json%get(p,"MudPump1ReliefValvePressure",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1ReliefValvePressure)
+        call json%get(p,"MudPump2LinerDiameter",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2LinerDiameter)
+        call json%get(p,"MudPump2Stroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2Stroke)
+        call json%get(p,"MudPump2MechanicalEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2MechanicalEfficiency)
+        call json%get(p,"MudPump2VolumetricEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2VolumetricEfficiency)
+        call json%get(p,"MudPump2Output",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2Output)
+        call json%get(p,"MudPump2OutputBblStroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2OutputBblStroke)
+        call json%get(p,"MudPump2Maximum",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2Maximum)
+        call json%get(p,"MudPump2ReliefValvePressure",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2ReliefValvePressure)
+        call json%get(p,"CementPumpLinerDiameter",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpLinerDiameter)
+        call json%get(p,"CementPumpStroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpStroke)
+        call json%get(p,"CementPumpMechanicalEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpMechanicalEfficiency)
+        call json%get(p,"CementPumpVolumetricEfficiency",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpVolumetricEfficiency)
+        call json%get(p,"CementPumpOutput",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpOutput)
+        call json%get(p,"CementPumpOutputBblStroke",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpOutputBblStroke)
+        call json%get(p,"CementPumpMaximum",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpMaximum)
+        call json%get(p,"CementPumpReliefValvePressure",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpReliefValvePressure)
+        call json%get(p,"MudPump1ReliefValveIsSet",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump1ReliefValveIsSet)
+        call json%get(p,"MudPump2ReliefValveIsSet",pitem)
+		call json%get(pitem,data%Configuration%Pumps%MudPump2ReliefValveIsSet)
+        call json%get(p,"CementPumpReliefValveIsSet",pitem)
+		call json%get(pitem,data%Configuration%Pumps%CementPumpReliefValveIsSet)
+        call json%get(p,"ManualPumpPower",pitem)
+		call json%get(pitem,data%Configuration%Pumps%ManualPumpPower)
+        call json%get(p,"Valve1",pitem)
+		call json%get(pitem,data%Configuration%Pumps%Valve1)
+        call json%get(p,"Valve2",pitem)
+		call json%get(pitem,data%Configuration%Pumps%Valve2)
+        call json%get(p,"Valve3",pitem)
+		call json%get(pitem,data%Configuration%Pumps%Valve3)
+        call json%get(p,"Valve4",pitem)
+		call json%get(pitem,data%Configuration%Pumps%Valve4)
+        call json%get(p,"Valve5",pitem)
+		call json%get(pitem,data%Configuration%Pumps%Valve5)
+
+    end subroutine
+
 
     subroutine OpenPump1()
         use CManifolds

CSharp/BasicInputs/RigSpecifications/CRigSize.f90

@@ -25,4 +25,23 @@ module CRigSize
         call json%add(parent,p)
     end subroutine
 
+    subroutine RigSizeFromJson(parent)
+        use json_module,IK =>json_ik
+        type(json_value),pointer :: parent
+        type(json_core) :: json
+        type(json_value),pointer :: p,pitems,pitem,pval,pbit
+
+        call json%get(parent,'RigSize',p)
+
+        call json%get(p,"RigType",pitem)
+		call json%get(pitem,data%Configuration%RigSize%RigType)
+        call json%get(p,"CrownHeight",pitem)
+		call json%get(pitem,data%Configuration%RigSize%CrownHeight)
+        call json%get(p,"MonkeyBoandHeight",pitem)
+		call json%get(pitem,data%Configuration%RigSize%MonkeyBoandHeight)
+        call json%get(p,"RigFloorHeight",pitem)
+		call json%get(pitem,data%Configuration%RigSize%RigFloorHeight)
+
+    end subroutine
+
 end module CRigSize

CSharp/BasicInputs/WellProfile/CCasingLinerChoke.f90

@@ -36,5 +36,46 @@ module CCasingLinerChoke
         call json%add(parent,p)
     end subroutine
 
+    subroutine CasingLinerChokeFromJson(parent)
+        use json_module,IK =>json_ik
+        type(json_value),pointer :: parent
+        type(json_core) :: json
+        type(json_value),pointer :: p,pitems,pitem,pval,pbit
+
+        call json%get(parent,'CasingLinerChoke',p)
+
+        call json%get(p,"CasingDepth",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingDepth)
+        call json%get(p,"CasingId",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingId)
+        call json%get(p,"CasingOd",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingOd)
+        call json%get(p,"CasingWeight",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingWeight)
+        call json%get(p,"CasingCollapsePressure",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingCollapsePressure)
+        call json%get(p,"CasingTensileStrength",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%CasingTensileStrength)
+        call json%get(p,"LinerTopDepth",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerTopDepth)
+        call json%get(p,"LinerLength",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerLength)
+        call json%get(p,"LinerId",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerId)
+        call json%get(p,"LinerOd",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerOd)
+        call json%get(p,"LinerWeight",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerWeight)
+        call json%get(p,"LinerCollapsePressure",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerCollapsePressure)
+        call json%get(p,"LinerTensileStrength",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%LinerTensileStrength)
+        call json%get(p,"OpenHoleId",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%OpenHoleId)
+        call json%get(p,"OpenHoleLength",pitem)
+		call json%get(pitem,data%Configuration%CasingLinerChoke%OpenHoleLength)
+
+    end subroutine
+
 
 end module CCasingLinerChoke

CSharp/BasicInputs/WellProfile/CPathGeneration.f90

@@ -42,4 +42,55 @@ module CPathGeneration
         call json%add(parent,ppath)
     end subroutine
 
+    subroutine PathGenerationFromJson(parent)
+        use json_module,IK =>json_ik
+        type(json_value),pointer :: parent
+        type(json_core) :: json
+        type(json_value),pointer :: p,pitems,pitem,pval,pbit,dpoints,dpoint
+		logical::is_found
+		type(CStringItem) :: item
+		integer::i,n_children
+		CHARACTER(KIND=JSON_CK, LEN=:), ALLOCATABLE :: val
+
+        call json%get(parent,'Path',p)
+        call json%get(p,'Items',pitems)
+		call json%info(pitems, n_children=n_children)
+
+		if (.not. allocated(data%Configuration%Path%Items) .or. size(data%Configuration%Configuration%Path%Items)/=n_children) then
+			ALLOCATE(data%Configuration%Configuration%Path%Items(n_children))
+		endif
+		do i=1,n_children
+			call json%get_child(pitems, i, pitem, found=is_found)
+            call json%get(pitem,"HoleType",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%HoleType)
+            call json%get(pitem,"Angle",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%Angle)
+            call json%get(pitem,"Length",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%Length)
+            call json%get(pitem,"FinalAngle",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%FinalAngle)
+            call json%get(pitem,"TotalLength",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%TotalLength)
+            call json%get(pitem,"MeasuredDepth",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%MeasuredDepth)
+            call json%get(pitem,"TotalVerticalDepth",pval)
+			call json%get(pval,data%Configuration%Path%Items(i)%TotalVerticalDepth)
+        end do
+
+        call json%get(p,'DataPoints',dpoints)
+		call json%info(dpoints, n_children=n_children)
+
+		if (.not. allocated(data%Configuration%Path%DataPoints) .or. size(data%Configuration%Configuration%Path%DataPoints)/=n_children) then
+			ALLOCATE(data%Configuration%Configuration%Path%DataPoints(n_children))
+		endif
+		do i=1,n_children
+			call json%get_child(dpoints, i, dpoint, found=is_found)
+            call json%get(dpoint,"X",pval)
+			call json%get(pval,data%Configuration%Path%DataPoints(i)%X)
+            call json%get(dpoint,"Y",pval)
+			call json%get(pval,data%Configuration%Path%DataPoints(i)%Y)
+        end do
+
+
+    end subroutine
 end module CPathGeneration