before pruning csharp folder

CSharp/BasicInputs/Bha/CStringConfiguration.f90

@@ -1,5 +1,7 @@
 module CStringConfiguration
 	use CStringConfigurationVariables
+	use ConfigurationVariables
+	
 	implicit none    
 	public    
     contains
@@ -14,41 +16,41 @@ module CStringConfiguration
 		type(CStringItem), intent(inout), target :: array(count)            
 		type(CBitInfo), intent(inout) :: bit
 		type(CStringItem), pointer :: item            
-		StringConfiguration%BitDefinition%BitType            = bit%BitType
+		Configuration%StringConfiguration%BitDefinition%BitType            = bit%BitType
-		StringConfiguration%BitDefinition%BitSize            = bit%BitSize
+		Configuration%StringConfiguration%BitDefinition%BitSize            = bit%BitSize
-		StringConfiguration%BitDefinition%BitCodeHundreds    = bit%BitCodeHundreds
+		Configuration%StringConfiguration%BitDefinition%BitCodeHundreds    = bit%BitCodeHundreds
-		StringConfiguration%BitDefinition%BitCodeTens        = bit%BitCodeTens
+		Configuration%StringConfiguration%BitDefinition%BitCodeTens        = bit%BitCodeTens
-		StringConfiguration%BitDefinition%BitCodeOnes        = bit%BitCodeOnes
+		Configuration%StringConfiguration%BitDefinition%BitCodeOnes        = bit%BitCodeOnes
-		StringConfiguration%BitDefinition%BitNozzleSize      = bit%BitNozzleSize
+		Configuration%StringConfiguration%BitDefinition%BitNozzleSize      = bit%BitNozzleSize
-		StringConfiguration%BitDefinition%BitLength          = bit%BitLength
+		Configuration%StringConfiguration%BitDefinition%BitLength          = bit%BitLength
-		StringConfiguration%BitDefinition%BitWeightPerLength = bit%BitWeightPerLength
+		Configuration%StringConfiguration%BitDefinition%BitWeightPerLength = bit%BitWeightPerLength
-		StringConfiguration%BitDefinition%BitNozzleNo        = bit%BitNozzleNo
+		Configuration%StringConfiguration%BitDefinition%BitNozzleNo        = bit%BitNozzleNo
-		StringConfiguration%BitDefinition%FloatValve         = bit%FloatValve            
+		Configuration%StringConfiguration%BitDefinition%FloatValve         = bit%FloatValve            
-		StringConfiguration%StringConfigurationCount         = count
+		Configuration%StringConfiguration%StringConfigurationCount         = count
             
-        if(StringConfiguration%BitDefinition%FloatValve) then
+        if(Configuration%StringConfiguration%BitDefinition%FloatValve) then
             call InstallFloatValve()
         else
             call RemoveFloatValve()
         endif
             
-		if(size(StringConfiguration%StringConfigurations) > 0) then
+		if(size(Configuration%StringConfiguration%StringConfigurations) > 0) then
-			deallocate(StringConfiguration%StringConfigurations)
+			deallocate(Configuration%StringConfiguration%StringConfigurations)
 		end if
 		if(count > 0) then
-			allocate(StringConfiguration%StringConfigurations(count))
+			allocate(Configuration%StringConfiguration%StringConfigurations(count))
             !j = count
 			do i = 1, count
 				item => array(i)
-				StringConfiguration%StringConfigurations(i)%ComponentType      = item%ComponentType     
+				Configuration%StringConfiguration%StringConfigurations(i)%ComponentType      = item%ComponentType     
-				StringConfiguration%StringConfigurations(i)%NumberOfJoint      = item%NumberOfJoint
+				Configuration%StringConfiguration%StringConfigurations(i)%NumberOfJoint      = item%NumberOfJoint
-				StringConfiguration%StringConfigurations(i)%LengthPerJoint     = item%LengthPerJoint
+				Configuration%StringConfiguration%StringConfigurations(i)%LengthPerJoint     = item%LengthPerJoint
-				StringConfiguration%StringConfigurations(i)%NominalOd          = item%NominalOd    
+				Configuration%StringConfiguration%StringConfigurations(i)%NominalOd          = item%NominalOd    
-				StringConfiguration%StringConfigurations(i)%NominalId          = item%NominalId
+				Configuration%StringConfiguration%StringConfigurations(i)%NominalId          = item%NominalId
-				StringConfiguration%StringConfigurations(i)%WeightPerLength    = item%WeightPerLength                    
+				Configuration%StringConfiguration%StringConfigurations(i)%WeightPerLength    = item%WeightPerLength                    
-				StringConfiguration%StringConfigurations(i)%ComponentLength    = item%ComponentLength
+				Configuration%StringConfiguration%StringConfigurations(i)%ComponentLength    = item%ComponentLength
-				StringConfiguration%StringConfigurations(i)%NominalToolJointOd = item%NominalToolJointOd
+				Configuration%StringConfiguration%StringConfigurations(i)%NominalToolJointOd = item%NominalToolJointOd
-				StringConfiguration%StringConfigurations(i)%Grade              = item%Grade
+				Configuration%StringConfiguration%StringConfigurations(i)%Grade              = item%Grade
                 !print*, 'type=', StringConfigurations(i)%ComponentType 
                 !print*, 'NumberOfJoint=', StringConfigurations(i)%NumberOfJoint
                 !print*, '-----------------------------------------------------------'

CSharp/BasicInputs/Bha/CStringConfigurationVariables.f90

@@ -1,7 +1,7 @@
 module CStringConfigurationVariables
+    ! use ConfigurationVariables, only: Configuration
     implicit none   
-    public    
+    public
-    
     !constants
     integer :: Bit_ComponentType = 0
     integer :: Stabilizer_ComponentType = 1
@@ -49,7 +49,5 @@ module CStringConfigurationVariables
         type(CStringItem), allocatable :: StringConfigurations(:)    
         type(CBitInfo) :: BitDefinition
     End type StringConfigurationType
-    Type(StringConfigurationType)::StringConfiguration
-        
     contains    
 end module CStringConfigurationVariables

CSharp/BasicInputs/Geology/CFormation.f90

@@ -1,5 +1,6 @@
 module CFormation
     use CFormationVariables
+    use ConfigurationVariables
     implicit none    
     public    
     contains  
@@ -11,27 +12,26 @@ module CFormation
         integer :: i
         type(CFormationItem), intent(inout), target :: array(count)            
 		type(CFormationItem), pointer :: item
-        Formation%Count = count
+        Configuration%Formation%Count = count
-        if(size(Formation%Formations) > 0) then
+        if(size(Configuration%Formation%Formations) > 0) then
-            deallocate(Formation%Formations)
+            deallocate(Configuration%Formation%Formations)
         end if
         if(count > 0) then
-            allocate(Formation%Formations(count))
+            allocate(Configuration%Formation%Formations(count))
             do i = 1, count
 			    item => array(i)
-                Formation%Formations(i)%Top = item%Top        
+                Configuration%Formation%Formations(i)%Top = item%Top        
-                Formation%Formations(i)%Thickness = item%Thickness
+                Configuration%Formation%Formations(i)%Thickness = item%Thickness
-                Formation%Formations(i)%Drillablity = item%Drillablity
+                Configuration%Formation%Formations(i)%Drillablity = item%Drillablity
-                Formation%Formations(i)%Abrasiveness = item%Abrasiveness    
+                Configuration%Formation%Formations(i)%Abrasiveness = item%Abrasiveness    
-                Formation%Formations(i)%ThresholdWeight = item%ThresholdWeight
+                Configuration%Formation%Formations(i)%ThresholdWeight = item%ThresholdWeight
-                Formation%Formations(i)%PorePressureGradient = item%PorePressureGradient
+                Configuration%Formation%Formations(i)%PorePressureGradient = item%PorePressureGradient
                 !print*, "==========================="
                 !print*, "Formations(", i, ")%Top=", Formations(i)%Top
                 !print*, "Formations(",i,")%Thickness", Formations(i)%Thickness
                 !print*, "Formations(",i,")%Drillablity", Formations(i)%Drillablity
             end do  
         end if
-
         SetFormations = 0
     end function SetFormations
 end module CFormation

CSharp/BasicInputs/Geology/CFormationVariables.f90

@@ -1,6 +1,7 @@
 module CFormationVariables
+    ! use ConfigurationVariables, only: Configuration
     implicit none    
-    public    
+    public
     
     ! types
     ! Pipe Items in String Array
@@ -17,7 +18,4 @@ module CFormationVariables
         integer :: Count = 0
         type(CFormationItem), allocatable :: Formations(:)
     End type FormationType
-    
-    Type(FormationType) :: Formation
-    contains    
 end module CFormationVariables

CSharp/Common/CLesson.f90

@@ -1,15 +0,0 @@
-module CLesson
-    use CLessonVariables
-    implicit none    
-    public
-    contains
-        subroutine SetWellProfileApproach(path, survey)
-        !DEC$ ATTRIBUTES DLLEXPORT :: SetWellProfileApproach
-        !DEC$ ATTRIBUTES ALIAS: 'SetWellProfileApproach' :: SetWellProfileApproach
-            implicit none
-            logical, intent(in) :: path
-            logical, intent(in) :: survey
-            Lesson%IsPathGeneration = path
-            Lesson%IsWellSurveyData = survey        
-        end subroutine
-end module CLesson

CSharp/Common/CLessonVariables.f90

@@ -1,9 +0,0 @@
-module CLessonVariables
-    implicit none    
-    public
-    type:: LessonType
-    logical :: IsPathGeneration
-    logical :: IsWellSurveyData
-    end type LessonType
-    type(LessonType)::Lesson
-end module CLessonVariables

CSharp/DownHole/CDownHole.f90

@@ -1,278 +0,0 @@
-module CDownHole
-    use CDownHoleVariables
-    implicit none    
-    public
-    
-    !abstract interface
-    !    subroutine ActionFluid(array)
-    !        use CDownHoleVariables
-    !        type(CFluid), intent(inout), target :: array
-    !    end subroutine
-    !end interface
-    
-    contains
-    
-    
-    subroutine AnnalusDrillMud
-    !DEC$ ATTRIBUTES DLLEXPORT::AnnalusDrillMud
-    !DEC$ ATTRIBUTES ALIAS: 'AnnalusDrillMud' :: AnnalusDrillMud
-        implicit none
-        DownHole%AnnDrillMud = .true.
-    end subroutine AnnalusDrillMud
-    
-    subroutine AnnalusCirculateMud
-    !DEC$ ATTRIBUTES DLLEXPORT::AnnalusCirculateMud
-    !DEC$ ATTRIBUTES ALIAS: 'AnnalusCirculateMud' :: AnnalusCirculateMud
-        implicit none
-        DownHole%AnnCirculateMud = .true.
-    end subroutine AnnalusCirculateMud
-    
-    
-    !type(CFluid) function ActionFluid() !(array)
-    !        !use CDownHoleVariables
-    !        !integer, intent(in) :: count
-    !        !type(CFluid), intent(inout), target :: array !(count)
-    !    end function
-    
-    
-    integer function GetAnnalusFluidsCount()
-    !DEC$ ATTRIBUTES DLLEXPORT::GetAnnalusFluidsCount
-    !DEC$ ATTRIBUTES ALIAS: 'GetAnnalusFluidsCount' :: GetAnnalusFluidsCount
-        implicit none
-        GetAnnalusFluidsCount = size(DownHole%AnnalusFluids)
-        !GetAnnalusFluidsCount = AnnalusFluidsCount
-    end function GetAnnalusFluidsCount
-    
-    subroutine GetAnnalusFluids(count, array)
-    !DEC$ ATTRIBUTES DLLEXPORT::GetAnnalusFluids
-    !DEC$ ATTRIBUTES ALIAS: 'GetAnnalusFluids' :: GetAnnalusFluids
-        implicit none
-        integer :: i
-        integer, intent(in) :: count
-        type(CFluid), intent(inout), target :: array(count)            
-		type(CFluid), pointer :: item
-        if(.not.allocated(DownHole%AnnalusFluids)) return
-        do i = 1, count            
-            item => array(i) 
-            item%StartMd = DownHole%AnnalusFluids(i)%StartMd
-            item%EndMd   = DownHole%AnnalusFluids(i)%EndMd
-            item%Density = DownHole%AnnalusFluids(i)%Density
-            item%MudType = DownHole%AnnalusFluids(i)%MudType
-        end do          
-    end subroutine GetAnnalusFluids
-    
-    
-    integer function GetStringFluidsCount()
-    !DEC$ ATTRIBUTES DLLEXPORT::GetStringFluidsCount
-    !DEC$ ATTRIBUTES ALIAS: 'GetStringFluidsCount' :: GetStringFluidsCount
-        implicit none
-        !GetStringFluidsCount = StringFluidsCount
-        GetStringFluidsCount = size(DownHole%StringFluids)
-    end function GetStringFluidsCount
-    
-    subroutine GetStringFluids(count, array)
-    !DEC$ ATTRIBUTES DLLEXPORT::GetStringFluids
-    !DEC$ ATTRIBUTES ALIAS: 'GetStringFluids' :: GetStringFluids
-        implicit none
-        integer :: i
-        integer, intent(in) :: count
-        type(CFluid), intent(inout), target :: array(count)      
-		type(CFluid), pointer :: item
-        if(.not.allocated(DownHole%StringFluids)) return
-        do i = 1, count
-            item => array(i) 
-            item%StartMd = DownHole%StringFluids(i)%StartMd
-            item%EndMd   = DownHole%StringFluids(i)%EndMd
-            item%Density = DownHole%StringFluids(i)%Density
-            item%MudType = DownHole%StringFluids(i)%MudType
-        end do          
-    end subroutine GetStringFluids
-    
-    
-    integer function GetStringCount()
-    !DEC$ ATTRIBUTES DLLEXPORT::GetStringCount
-    !DEC$ ATTRIBUTES ALIAS: 'GetStringCount' :: GetStringCount
-        implicit none
-        GetStringCount = DownHole%StringCount
-        !GetStringCount = 4
-    end function GetStringCount
-        
-    subroutine GetString(count, array)
-    !DEC$ ATTRIBUTES DLLEXPORT::GetString
-    !DEC$ ATTRIBUTES ALIAS: 'GetString' :: GetString
-        implicit none
-        integer :: i
-        integer, intent(in) :: count
-        type(CStringComponent), intent(inout), target :: array(count)            
-		type(CStringComponent), pointer :: item
-        !do i = 1, count
-        !    item => array(i) 
-        !    item%Length        = String(i)%Length       
-        !    item%TopDepth      = String(i)%TopDepth     
-        !    item%DownDepth     = String(i)%DownDepth    
-        !    item%Od            = String(i)%Od           
-        !    item%Id            = String(i)%Id           
-        !    item%ComponentType = String(i)%ComponentType
-        !end do          
-    end subroutine GetString
-    
-    
-    
-    
-    
-    subroutine GetDownhole()
-    !DEC$ ATTRIBUTES DLLEXPORT::GetDownhole
-    !DEC$ ATTRIBUTES ALIAS: 'GetDownhole' :: GetDownhole
-        implicit none
-        
-        !BopElement
-        if(associated(BopElementsPtr)) call BopElementsPtr(DownHole%BopElements)
-        
-        
-        !Annalus
-        if(associated(AnnalusMudCountPtr)) call AnnalusMudCountPtr(DownHole%AnnalusFluidsCount)
-        if(associated(AnnalusMudArrayPtr)) call AnnalusMudArrayPtr(DownHole%AnnalusFluids)
-        
-        
-        !string
-        if(associated(StringMudCountPtr)) call StringMudCountPtr(DownHole%StringFluidsCount)
-        if(associated(StringMudArrayPtr)) call StringMudArrayPtr(DownHole%StringFluids)
-        
-        
-        !components
-        if(associated(StringComponentCountPtr)) call StringComponentCountPtr(DownHole%StringCount)
-        if(associated(StringComponentArrayPtr)) call StringComponentArrayPtr(DownHole%String)
-        
-        
-    end subroutine GetDownhole
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    real(8) function GetDrillPipePressureH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetDrillPipePressureH
-    !DEC$ ATTRIBUTES ALIAS: 'GetDrillPipePressureH' :: GetDrillPipePressureH
-        use PressureDisplayVARIABLES
-	    implicit none
-	    GetDrillPipePressureH = DownHole%DrillPipePressure       !real(PressureGauges(1), 8) !
-    end function
-    
-    real(8) function GetCasingPressureH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetCasingPressureH
-    !DEC$ ATTRIBUTES ALIAS: 'GetCasingPressureH' :: GetCasingPressureH
-        use FricPressDropVars
-	    implicit none
-        !if (allocated(FinalFlowEl)) then
-        !    if(size(FinalFlowEl) > 0) then
-        !        CasingPressure = real(int(FinalFlowEl(AnnulusLastEl)%EndPress), 8) !CasingPressure
-        !    endif
-        !endif
-	    GetCasingPressureH = DownHole%CasingPressure
-    end function
-    
-    real(8) function GetShoePressure()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetShoePressure
-    !DEC$ ATTRIBUTES ALIAS: 'GetShoePressure' :: GetShoePressure
-        use PressureDisplayVARIABLES
-	    implicit none
-	    GetShoePressure = DownHole%ShoePressure      !real(PressureGauges(5), 8) !
-    end function
-
-    real(8) function GetBottomHolePressure()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetBottomHolePressure
-    !DEC$ ATTRIBUTES ALIAS: 'GetBottomHolePressure' :: GetBottomHolePressure
-        use PressureDisplayVARIABLES
-	    implicit none
-	    GetBottomHolePressure = DownHole%BottomHolePressure      !real(PressureGauges(3), 8) !
-    end function
-    
-    real(8) function GetFormationPressure()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetFormationPressure
-    !DEC$ ATTRIBUTES ALIAS: 'GetFormationPressure' :: GetFormationPressure
-	    implicit none
-	    GetFormationPressure = DownHole%FormationPressure
-    end function
-    
-    real function GetInfluxRate()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetInfluxRate
-    !DEC$ ATTRIBUTES ALIAS: 'GetInfluxRate' :: GetInfluxRate
-	    implicit none
-	    GetInfluxRate = DownHole%InfluxRate
-    end function
-    
-    real function GetKickVolume()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetKickVolume
-    !DEC$ ATTRIBUTES ALIAS: 'GetKickVolume' :: GetKickVolume
-	    implicit none
-        
-        !KickVolume = KickVolume + 1
-        
-	    GetKickVolume = DownHole%KickVolume
-    end function
-    
-    real function GetSecondKickVolume()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetSecondKickVolume
-    !DEC$ ATTRIBUTES ALIAS: 'GetSecondKickVolume' :: GetSecondKickVolume
-	    implicit none
-        
-        !SecondKickVolume = SecondKickVolume + 1
-        
-	    GetSecondKickVolume = DownHole%SecondKickVolume
-    end function
-    
-    real function GetPermeabilityExposedHeight()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetPermeabilityExposedHeight
-    !DEC$ ATTRIBUTES ALIAS: 'GetPermeabilityExposedHeight' :: GetPermeabilityExposedHeight
-	    implicit none
-	    GetPermeabilityExposedHeight = DownHole%PermeabilityExposedHeight
-    end function
-    
-    
-    
-    real(8) function GetDensityH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetDensityH
-    !DEC$ ATTRIBUTES ALIAS: 'GetDensityH' :: GetDensityH
-	    implicit none
-	    GetDensityH = DownHole%Density
-    end function
-    
-    real(8) function GetPressureH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetPressureH
-    !DEC$ ATTRIBUTES ALIAS: 'GetPressureH' :: GetPressureH
-	    implicit none
-	    GetPressureH = DownHole%Pressure
-    end function
-    
-    real(8) function GetTemperatureH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetTemperatureH
-    !DEC$ ATTRIBUTES ALIAS: 'GetTemperatureH' :: GetTemperatureH
-	    implicit none
-	    GetTemperatureH = DownHole%Temperature
-    end function
-    
-    
-    real(8) function GetHeightH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetHeightH
-    !DEC$ ATTRIBUTES ALIAS: 'GetHeightH' :: GetHeightH
-	    implicit none
-	    GetHeightH = DownHole%Height
-    end function
-    
-    real(8) function GetVolumeH()
-    !DEC$ ATTRIBUTES DLLEXPORT :: GetVolumeH
-    !DEC$ ATTRIBUTES ALIAS: 'GetVolumeH' :: GetVolumeH
-	    implicit none
-	    GetVolumeH = DownHole%Volume
-    end function
-    
-end module CDownHole

CSharp/DownHole/CDownHoleVariables.f90

@@ -1,7 +1,7 @@
 module CDownHoleVariables
     use CDownHoleTypes
     use CStringConfigurationVariables
-    use CDownHoleActions
+    ! use CDownHoleActions
     use CLog4
     implicit none    
     public

Equipments/MudSystem/MudSystem.f90

@@ -2221,29 +2221,16 @@ module MudSystemModule
     
 
     if (StudentStation%PitGainLossZero) then
-        
         DrillingWatch%PitGainLose= 0.d0 !DrillWatch
         MudSystem%RefrencePitVolume_DrillWatch= MudSystem%ActiveTankVolume/42.    !(bbl) !DrillWatch
         !*********************************************
-        
         DataDisplayConsole%PitGainLossGauge= 0.    !MFF Indicator
         MudSystem%RefrencePitVolume= MudSystem%ActiveTankVolume/42.    !(bbl) !MFF Indicator
-
     endif
-    
-    
- 
-    
-    
-     
-     
 !!====================================================================== 
 !!                           MUD FLOW-FILL INDICATOR
-!!======================================================================        
+!!====================================================================== 
-        
+     IF (DataDisplayConsole%MFFIPowerSwitch==1 ) THEN !.and. IsPortable==.false.
-     IF (DataDisplayConsole%MFFIPowerSwitch==1 ) THEN !.and. IsPortable==.false.          
-         
-
 !====================TotalStrokes Reset and Calculate======================         
         if (DataDisplayConsole%MFFIResetTotalStrokes == 1) then
               IF (DataDisplayConsole%MFFIPumpSelectorSwitch == 1) THEN

FluidFlow/Flow_Startup.f90

@@ -1,5 +1,5 @@
 SUBROUTINE FlowStartup
-    
+    Use ConfigurationVariables
     USE Fluid_Flow_Startup_Vars
     USE CStringConfigurationVariables
     USE CMudPropertiesVariables
@@ -68,7 +68,7 @@ SUBROUTINE FlowStartup
     CasingPressure_DataDisplayMalF = 0
     
     SoundSpeed = 1530.0 / Convfttom
-    PressureTimeStepDelay(1) = INT(2.0 * SUM(StringConfiguration%StringConfigurations(2:)%ComponentLength) / SoundSpeed / dt)
+    PressureTimeStepDelay(1) = INT(2.0 * SUM(Configuration%StringConfiguration%StringConfigurations(2:)%ComponentLength) / SoundSpeed / dt)
     PressureTimeStepDelay(2) = INT(PathGeneration%Items(SIZE(PathGeneration%Items))%MeasuredDepth / SoundSpeed / dt)
     PressureTimeStepDelay(3) = INT(Shoe%ShoeDepth / SoundSpeed / dt)
     

FluidFlow/Well_Pressure_Data_Transfer.f90

@@ -13,7 +13,7 @@ SUBROUTINE WellPressureDataTransfer
     !! frictional pressure drop calculated by subroutine Sub_Press_Drop_Calculator
     !! This subroutine includes hydrostatic pressure and later will include effect of corss-section area change
     !! which causes acceleration or decceleration of flow
-    
+    Use ConfigurationVariables
     USE FricPressDropVars
     use MudSystemModule
     USE MudSystemVARIABLES
@@ -43,11 +43,11 @@ SUBROUTINE WellPressureDataTransfer
     
     
     !!!!!!!!!!!!!!!! bit is present
-    BitTrue = StringConfiguration%StringConfigurations(1)%ComponentType  ==  Bit_ComponentType           ! Bit_ComponentType = 0
+    BitTrue = Configuration%StringConfiguration%StringConfigurations(1)%ComponentType  ==  Bit_ComponentType           ! Bit_ComponentType = 0
     BitCd = 0.98
-    BitNozzDia = 32.0 * StringConfiguration%BitDefinition%BitNozzleSize       ! nozzle diameter in 1/32 in
+    BitNozzDia = 32.0 * Configuration%StringConfiguration%BitDefinition%BitNozzleSize       ! nozzle diameter in 1/32 in
     BitNozzleArea = 7.6699E-4 * BitNozzDia**2
-    BitNozzleNum = StringConfiguration%BitDefinition%BitNozzleNo - BitJetsPlugged * BitProblems%PlugJetsCount
+    BitNozzleNum = Configuration%StringConfiguration%BitDefinition%BitNozzleNo - BitJetsPlugged * BitProblems%PlugJetsCount
     BitTotNozzArea = BitNozzleNum * BitNozzleArea + 0.5 * BitJetsWashedOut * BitProblems%JetWashoutCount * BitNozzleArea
     IF (BitNozzleNum == 0) THEN
         BitTotallyPluged = .TRUE.
@@ -55,7 +55,7 @@ SUBROUTINE WellPressureDataTransfer
         BitTotallyPluged = .FALSE.
     END IF
     
-    FloatValveIn = StringConfiguration%BitDefinition%FloatValve
+    FloatValveIn = Configuration%StringConfiguration%BitDefinition%FloatValve
     !FloatValveOpen = .TRUE.
     !IF (JetWashoutCount > 0 .OR. PlugJetsCount > 0) THEN
     !    WRITE (*,*) 'PlugJetsCount' , PlugJetsCount

FluidFlow/kick/Formation_Information.f90

@@ -4,6 +4,7 @@ SUBROUTINE FormationInformationCalculator
     Use TD_WellGeometry
     Use CReservoirVariables
     Use CFormationVariables
+    Use ConfigurationVariables
     USE Fluid_Flow_Startup_Vars
     USE CLog2
     USE CDownHoleVariables
@@ -51,12 +52,12 @@ SUBROUTINE FormationInformationCalculator
     !!===> Down Measured Depth of Formation 
     WellGeoTopTVD = 0.
     Do i = 1 , TD_WellGeneral%WellIntervalsCount
-        if ( (Reservoir%FormationTop + Formation%Formations(Reservoir%FormationNo)%Thickness)>=TD_WellGeo(i)%VerticalDepth ) then
+        if ( (Reservoir%FormationTop + Configuration%Formation%Formations(Reservoir%FormationNo)%Thickness)>=TD_WellGeo(i)%VerticalDepth ) then
             KickFormDownMD = KickFormDownMD + TD_WellGeo(i)%IntervalLength
             WellGeoTopTVD = TD_WellGeo(i)%VerticalDepth
-        else if ( (Reservoir%FormationTop+Formation%Formations(Reservoir%FormationNo)%Thickness)<TD_WellGeo(i)%VerticalDepth ) then
+        else if ( (Reservoir%FormationTop+Configuration%Formation%Formations(Reservoir%FormationNo)%Thickness)<TD_WellGeo(i)%VerticalDepth ) then
             if ( TD_WellGeo(i)%HoleType==0 ) then
-                KickFormDownMD = KickFormDownMD + (((Reservoir%FormationTop+Formation%Formations(Reservoir%FormationNo)%Thickness)-WellGeoTopTVD)&
+                KickFormDownMD = KickFormDownMD + (((Reservoir%FormationTop+Configuration%Formation%Formations(Reservoir%FormationNo)%Thickness)-WellGeoTopTVD)&
                                 / cos(TD_WellGeo(i)%StartAngle)) 
             else
                 KickFormDownMD = KickFormDownMD + (TD_WellGeo(i)%RCurvature &
@@ -67,9 +68,9 @@ SUBROUTINE FormationInformationCalculator
     End Do
     
     !!===> Determination of Formation Length for Kick Modeling
-    if (TD_WellGeneral%WellTotalVerticalLength >= Reservoir%FormationTop .AND. TD_WellGeneral%WellTotalVerticalLength < (Reservoir%FormationTop+Formation%Formations(Reservoir%FormationNo)%Thickness)) then
+    if (TD_WellGeneral%WellTotalVerticalLength >= Reservoir%FormationTop .AND. TD_WellGeneral%WellTotalVerticalLength < (Reservoir%FormationTop+Configuration%Formation%Formations(Reservoir%FormationNo)%Thickness)) then
         KickFormLength = TD_WellGeneral%WellTotalLength - KickFormTopMD   ![ft]
-    else if ( TD_WellGeneral%WellTotalVerticalLength >= (Reservoir%FormationTop + Formation%Formations(Reservoir%FormationNo)%Thickness) ) then
+    else if ( TD_WellGeneral%WellTotalVerticalLength >= (Reservoir%FormationTop + Configuration%Formation%Formations(Reservoir%FormationNo)%Thickness) ) then
         KickFormLength = KickFormDownMD - KickFormTopMD       ![ft]
     else
         KickFormLength = 0.
@@ -82,7 +83,7 @@ SUBROUTINE FormationInformationCalculator
 !====================================================
     FormPermeability = Reservoir%FormationPermeability   ! [mD]
     
-    FormPressure = TD_WellGeneral%WellTotalVerticalLength * Formation%Formations(Reservoir%FormationNo)%PorePressureGradient          ![psia]
+    FormPressure = TD_WellGeneral%WellTotalVerticalLength * Configuration%Formation%Formations(Reservoir%FormationNo)%PorePressureGradient          ![psia]
     DownHole%FormationPressure = INT(FormPressure)
     !CALL Log_2('FormPressure =' , FormPressure)
     !print*, 'Formations(FormationNo)%PorePressureGradient=', Formations(FormationNo)%PorePressureGradient

Rop/Bit_Specification.f90

@@ -3,7 +3,7 @@ subroutine Bit_Specification
     use sROP_Other_Variables    
     use sROP_Variables
     use CStringConfigurationVariables
-    
+    use ConfigurationVariables
     implicit none
     
     INTEGER :: io
@@ -17,7 +17,7 @@ subroutine Bit_Specification
     
     
     
-    ROP_Spec%BitClass = (StringConfiguration%BitDefinition%BitCodeHundreds*100)+(StringConfiguration%BitDefinition%BitCodeTens*10)+StringConfiguration%BitDefinition%BitCodeOnes
+    ROP_Spec%BitClass = (Configuration%StringConfiguration%BitDefinition%BitCodeHundreds*100)+(Configuration%StringConfiguration%BitDefinition%BitCodeTens*10)+Configuration%StringConfiguration%BitDefinition%BitCodeOnes
     rd        = SNGL(ROP_Spec%BitClass)/10.d0
     ROP_Spec%BrCoef   = ( (SNGL(ROP_Spec%BitClass)/10.d0)-(DINT(rd)) )*10.d0
     

Rop/ROP_MainCalculation.f90

@@ -1,5 +1,5 @@
 subroutine ROP_MainCalculation
-
+    use ConfigurationVariables
     use sROP_Other_Variables
     use sROP_Variables
     use CStringConfigurationVariables
@@ -28,13 +28,13 @@ subroutine ROP_MainCalculation
     !Real(8) :: ROP_Bit%SetROPGauge
     
     zero_ROPcount = 0
-    ROP_Bit%NoOfFormations = Formation%Count
+    ROP_Bit%NoOfFormations = Configuration%Formation%Count
     ROP_Bit%DrillingVerticalDepth = TD_WellGeneral%WellTotalVerticalLength
     
     
     
    !===> MaximumWellDepthExceeded Warning
-    if ( ROP_Bit%DrillingVerticalDepth>=(Formation%Formations(Formation%Count)%Top+Formation%Formations(Formation%Count)%Thickness) ) then
+    if ( ROP_Bit%DrillingVerticalDepth>=(Configuration%Formation%Formations(Configuration%Formation%Count)%Top+Configuration%Formation%Formations(Configuration%Formation%Count)%Thickness) ) then
         ROP_Bit%RateOfPenetration = 0.0d0
         Call Set_ROP(ROP_Bit%RateOfPenetration)
         Call Activate_MaximumWellDepthExceeded()
@@ -48,7 +48,7 @@ subroutine ROP_MainCalculation
         ROP_Spec%FormationNumber = ROP_Spec%FormationNumber
     else
         do i= 1,ROP_Bit%NoOfFormations   
-            ROP_Spec%FormationTopDepth = Formation%Formations(i)%Top
+            ROP_Spec%FormationTopDepth = Configuration%Formation%Formations(i)%Top
             if (ROP_Bit%DrillingVerticalDepth>=ROP_Spec%FormationTopDepth) then    
                 ROP_Spec%FormationNumber = i   
             end if
@@ -74,14 +74,14 @@ subroutine ROP_MainCalculation
     
     
     ! $$$$$**$$$$$**$$$$$**$$$$$**$$$$$**     Variables Initialization:    *$$$$$**$$$$$**$$$$$**$$$$$**$$$$$  
-    ROP_Spec%DiameterOfBit        =  StringConfiguration%BitDefinition%BitSize          ! unit : [in.] (Typical Range: 3.0 to 30.0)
+    ROP_Spec%DiameterOfBit        =  Configuration%StringConfiguration%BitDefinition%BitSize          ! unit : [in.] (Typical Range: 3.0 to 30.0)
-    ROP_Spec%NumberOfBitNozzles   =  StringConfiguration%BitDefinition%BitNozzleNo      ! (Typical Values: 1 to 10)
+    ROP_Spec%NumberOfBitNozzles   =  Configuration%StringConfiguration%BitDefinition%BitNozzleNo      ! (Typical Values: 1 to 10)
-    ROP_Spec%DiameterOfBitNozzle  =  StringConfiguration%BitDefinition%BitNozzleSize    ! unit : [inch] *** basic input: [1/32 in.] (Typical Range: 8.0 to 32.0)
+    ROP_Spec%DiameterOfBitNozzle  =  Configuration%StringConfiguration%BitDefinition%BitNozzleSize    ! unit : [inch] *** basic input: [1/32 in.] (Typical Range: 8.0 to 32.0)
-    ROP_Spec%CriticalMudDensity   =  Formation%Formations(ROP_Spec%FormationNumber)%PorePressureGradient/.465d0*9.d0      ! ????????? delete ,unit : [ppg] or [lb/gal] (Typical Range: 0 to 10.0)
+    ROP_Spec%CriticalMudDensity   =  Configuration%Formation%Formations(ROP_Spec%FormationNumber)%PorePressureGradient/.465d0*9.d0      ! ????????? delete ,unit : [ppg] or [lb/gal] (Typical Range: 0 to 10.0)
-    ROP_Bit%FormationMudDensity   =  Formation%Formations(ROP_Spec%FormationNumber)%PorePressureGradient/0.052d0
+    ROP_Bit%FormationMudDensity   =  Configuration%Formation%Formations(ROP_Spec%FormationNumber)%PorePressureGradient/0.052d0
     ROP_Bit%BottomHolePressure    =  PressureGauges(3)              !5200 [psi]
     ROP_Bit%ECD                   =  ROP_Bit%BottomHolePressure/(0.052*ROP_Bit%DrillingVerticalDepth)
-    ROP_Spec%CriticalWeightOnBit  =  (Formation%Formations(ROP_Spec%FormationNumber)%ThresholdWeight/5.d0)-(.06d0*(Formation%Formations(ROP_Spec%FormationNumber)%ThresholdWeight-10.d0))      ! unit : [klb/in] (Typical Range: 0 to 10 ----> 0.6 to 2)
+    ROP_Spec%CriticalWeightOnBit  =  (Configuration%Formation%Formations(ROP_Spec%FormationNumber)%ThresholdWeight/5.d0)-(.06d0*(Configuration%Formation%Formations(ROP_Spec%FormationNumber)%ThresholdWeight-10.d0))      ! unit : [klb/in] (Typical Range: 0 to 10 ----> 0.6 to 2)
     !IF (ALLOCATED(FlowEl)) THEN
     !    ROP_Bit%MudViscosity     =  FlowEl(NoHorizontalEl + NoStringEl)%mueff     !13.5  [cP]
         ROP_Bit%MudDensity        = MudSystem%BitMudDensity ! [ppg]
@@ -98,7 +98,7 @@ subroutine ROP_MainCalculation
     
     
     ! -----**-----**-----**-----**-----*      ROP_bit%RateofPenetration Model Coefficients:     *-----**-----**-----**-----**-----
-    ROP_Spec%a1 = log(Formation%Formations(ROP_Spec%FormationNumber)%Drillablity) 
+    ROP_Spec%a1 = log(Configuration%Formation%Formations(ROP_Spec%FormationNumber)%Drillablity) 
     ROP_Spec%a2 = 1.2799d-04
     ROP_Spec%a3 = 1.7952d-04
     ROP_Spec%a4 = 4.0656d-05
@@ -107,7 +107,7 @@ subroutine ROP_MainCalculation
     ROP_Spec%a7 = 2.1837d-01
     ROP_Spec%a8 = 4.4915d-01
     ROP_Spec%dt = 0.1d0   ![s]
-    ROP_Spec%TouH = Formation%Formations(ROP_Spec%FormationNumber)%Abrasiveness*3600.d0    ! [hr]--->[s]   ( Typical Range: 1<Abrasiveness<100 )
+    ROP_Spec%TouH = Configuration%Formation%Formations(ROP_Spec%FormationNumber)%Abrasiveness*3600.d0    ! [hr]--->[s]   ( Typical Range: 1<Abrasiveness<100 )
     ! -----**-----**-----**-----**---     End of ROP_bit%RateofPenetration Model Coefficients      ---**-----**-----**-----**-----
     
     
@@ -116,7 +116,7 @@ subroutine ROP_MainCalculation
     
     
     ! $$$$$**$$$$$**$$$$$**$$$$$**$$$$$**        Main Calculations:        *$$$$$**$$$$$**$$$$$**$$$$$**$$$$$
-    ROP_Spec%f1 = Formation%Formations(ROP_Spec%FormationNumber)%Drillablity                        ! 1<=Drillability<=100  [ft/h]
+    ROP_Spec%f1 = Configuration%Formation%Formations(ROP_Spec%FormationNumber)%Drillablity                        ! 1<=Drillability<=100  [ft/h]
     ROP_Spec%f2 = exp(2.303d0*ROP_Spec%a2*(10000.d0 - ROP_Bit%DrillingVerticalDepth))            ! First Compaction Vairable
     ROP_Spec%f3 = exp(2.303d0*ROP_Spec%a3*(ROP_Bit%DrillingVerticalDepth**0.69d0)*(ROP_Bit%FormationMudDensity-9.d0))    ! Second Compaction Vairable
     

Simulation/CSimulationThreads.f90

@@ -1,146 +0,0 @@
-module CSimulationThreads
-    use iso_c_binding
-    implicit none    
-    public
-    ! Thread Related Variables
-    integer(INT_PTR_KIND()), parameter :: ThreadSecurity = 0
-    integer(INT_PTR_KIND()), parameter :: ThreadStackSize = 0
-    integer(4) :: ApiResult
-    integer(4) :: WaitForStopMs = 500
-    
-    !BopStack
-    integer(INT_PTR_KIND()) :: BopStackThreadHandle
-    integer(INT_PTR_KIND()) :: BopStackThreadId
-    integer(4) :: BopStackThreadParam = 0
-        
-    !Pumps
-    integer(INT_PTR_KIND()) :: Pump1ThreadHandle
-    integer(INT_PTR_KIND()) :: Pump2ThreadHandle
-    integer(INT_PTR_KIND()) :: Pump3ThreadHandle
-    integer(INT_PTR_KIND()) :: Pump1ThreadId
-    integer(INT_PTR_KIND()) :: Pump2ThreadId
-    integer(INT_PTR_KIND()) :: Pump3ThreadId
-    integer(4) :: Pump1ThreadParam = 0
-    integer(4) :: Pump2ThreadParam = 0
-    integer(4) :: Pump3ThreadParam = 0
-        
-    !ChokeControl
-    integer(INT_PTR_KIND()) :: ChokeControlThreadHandle
-    integer(INT_PTR_KIND()) :: ChokeControlThreadId
-    integer(4) :: ChokeControlThreadParam = 0
-        
-    !Rop
-    integer(INT_PTR_KIND()) :: RopThreadHandle
-    integer(INT_PTR_KIND()) :: RopThreadId
-    integer(4) :: RopThreadParam = 0
-        
-        
-    !RotaryTable
-    integer(INT_PTR_KIND()) :: RotaryTableThreadHandle
-    integer(INT_PTR_KIND()) :: RotaryTableThreadId
-    integer(4) :: RotaryTableThreadParam = 0
-        
-        
-    !FluidFlow
-    integer(INT_PTR_KIND()) :: FluidFlowThreadHandle
-    integer(INT_PTR_KIND()) :: FluidFlowThreadId
-    integer(4) :: FluidFlowThreadParam = 0
-        
-    !TorqueDrag
-    integer(INT_PTR_KIND()) :: TorqueDragThreadHandle
-    integer(INT_PTR_KIND()) :: TorqueDragThreadId
-    integer(4) :: TorqueDragThreadParam = 0
-    
-    
-    !TopDrive
-    integer(INT_PTR_KIND()) :: TopDriveThreadHandle
-    integer(INT_PTR_KIND()) :: TopDriveThreadId
-    integer(4) :: TopDriveThreadParam = 0
-    
-    
-    !Drawworks
-    integer(INT_PTR_KIND()) :: DrawworksThreadHandle
-    integer(INT_PTR_KIND()) :: DrawworksThreadId
-    integer(4) :: DrawworksThreadParam = 0
-        
-    !Geo
-    integer(INT_PTR_KIND()) :: GeoThreadHandle
-    integer(INT_PTR_KIND()) :: GeoThreadId
-    integer(4) :: GeoThreadParam = 0
-        
-    !MudFlowFillIndicator
-    integer(INT_PTR_KIND()) :: MudFlowFillIndicatorThreadHandle
-    integer(INT_PTR_KIND()) :: MudFlowFillIndicatorThreadId
-    integer(4) :: MudFlowFillIndicatorThreadParam = 0
-        
-    !MudSystem
-    integer(INT_PTR_KIND()) :: MudSystemThreadHandle
-    integer(INT_PTR_KIND()) :: MudSystemThreadId
-    integer(4) :: MudSystemThreadParam = 0
-        
-        
-        
-        
-        
-        
-    !PipeRams1
-    integer(INT_PTR_KIND()) :: PipeRams1ThreadHandle
-    integer(INT_PTR_KIND()) :: PipeRams1ThreadId
-    integer(4) :: PipeRams1ThreadParam = 0
-        
-    !PipeRams2
-    integer(INT_PTR_KIND()) :: PipeRams2ThreadHandle
-    integer(INT_PTR_KIND()) :: PipeRams2ThreadId
-    integer(4) :: PipeRams2ThreadParam = 0
-        
-    !KillLine
-    integer(INT_PTR_KIND()) :: KillLineThreadHandle
-    integer(INT_PTR_KIND()) :: KillLineThreadId
-    integer(4) :: KillLineThreadParam = 0
-        
-    !ChokeLine
-    integer(INT_PTR_KIND()) :: ChokeLineThreadHandle
-    integer(INT_PTR_KIND()) :: ChokeLineThreadId
-    integer(4) :: ChokeLineThreadParam = 0
-        
-    !BlindRams
-    integer(INT_PTR_KIND()) :: BlindRamsThreadHandle
-    integer(INT_PTR_KIND()) :: BlindRamsThreadId
-    integer(4) :: BlindRamsThreadParam = 0
-        
-    !Annular
-    integer(INT_PTR_KIND()) :: AnnularThreadHandle
-    integer(INT_PTR_KIND()) :: AnnularThreadId
-    integer(4) :: AnnularThreadParam = 0
-        
-        
-        
-    !OperationScenarios
-    integer(INT_PTR_KIND()) :: OperationScenariosThreadHandle
-    integer(INT_PTR_KIND()) :: OperationScenariosThreadId
-    integer(4) :: OperationScenariosThreadParam = 0
-        
-        
-    !PathFinding
-    integer(INT_PTR_KIND()) :: PathFindingThreadHandle
-    integer(INT_PTR_KIND()) :: PathFindingThreadId
-    integer(4) :: PathFindingThreadParam = 0
-    
-    
-    ! just for now
-    !Sample
-    integer(INT_PTR_KIND()) :: SampleThreadHandle
-    integer(INT_PTR_KIND()) :: SampleThreadId
-    integer(4) :: SampleThreadParam = 0
-    
-    
-#ifdef disEnableSimulation        
-    
-        
-    !Test
-    integer(INT_PTR_KIND()) :: TestThreadHandle
-    integer(INT_PTR_KIND()) :: TestThreadId
-    integer(4) :: TestThreadParam = 0
-#endif
-    contains
-end module CSimulationThreads

Simulation/ConfigurationVariables.f90

@@ -0,0 +1,37 @@
+module ConfigurationVariables
+    use CStringConfigurationVariables
+    use CFormationVariables
+    use CReservoirVariables
+    use CShoeVariables
+    use CAccumulatorVariables
+    use CBopStackVariables
+    use CHoistingVariables
+    use CPowerVariables
+    use CPumpsVariables
+    use CRigSizeVariables
+    use CCasingLinerChokeVariables
+    use CPathGenerationVariables
+    use CWellSurveyDataVariables
+    use CMudPropertiesVariables
+    
+    type ConfigurationType
+        Type(StringConfigurationType)::StringConfiguration
+        Type(FormationType) :: Formation
+        Type(ReservoirType)::Reservoir
+        Type(ShoeType)::Shoe
+        Type(AccumulatorType)::Accumulator
+        Type(BopStackSpecificationType)::BopStackSpecification
+        Type(HoistingType)::Hoisting
+        Type(PowerType)::Power
+        Type(PumpSpecificationType)::PumpsSpecification
+        Type(RigSizeType)::RigSize
+        Type(CasingLinerChokeType)::CasingLinerChoke
+        Type(PathGenerationType)::PathGeneration
+        Type(WellSurveyDataType)::WellSurveyData
+        Type(MudPropertiesType)::MudProperties
+
+    end type ConfigurationType
+    type(ConfigurationType)::Configuration
+contains
+    
+end module ConfigurationVariables

SimulationCore2.vfproj

@@ -104,15 +104,11 @@
 		<File RelativePath=".\CSharp\Common\CCommon.f90"/>
 		<File RelativePath=".\CSharp\Common\CCommonVariables.f90"/>
 		<File RelativePath=".\CSharp\Common\CIActionReference.f90"/>
-		<File RelativePath=".\CSharp\Common\CLesson.f90"/>
-		<File RelativePath=".\CSharp\Common\CLessonVariables.f90"/>
 		<File RelativePath=".\CSharp\Common\CQuery.f90"/>
 		<File RelativePath=".\CSharp\Common\CScaleRange.f90"/>
 		<File RelativePath=".\CSharp\Common\CTimer.f90"/>
 		<File RelativePath=".\CSharp\Common\CTimerLegacy.f90"/></Filter>
 		<Filter Name="DownHole">
-		<File RelativePath=".\CSharp\DownHole\CDownHole.f90"/>
-		<File RelativePath=".\CSharp\DownHole\CDownHoleActions.f90"/>
 		<File RelativePath=".\CSharp\DownHole\CDownHoleTypes.f90"/>
 		<File RelativePath=".\CSharp\DownHole\CDownHoleVariables.f90"/></Filter>
 		<Filter Name="Equipments">
@@ -339,8 +335,6 @@
 		<File RelativePath=".\FluidFlow\Well_Pressure_Data_Transfer.f90"/></Filter>
 		<Filter Name="Geo">
 		<File RelativePath=".\Geo\GeoMain.f90"/></Filter>
-		<Filter Name="Simulation">
-		<File RelativePath=".\Simulation\CSounds.f90"/></Filter>
 		<Filter Name="Rop">
 		<File RelativePath=".\Rop\Bit_Specification.f90"/>
 		<File RelativePath=".\Rop\JetImpactForce.f90"/>
@@ -348,6 +342,9 @@
 		<File RelativePath=".\Rop\RopMain.f90"/>
 		<File RelativePath=".\Rop\sROP_Other_Variables.f90"/>
 		<File RelativePath=".\Rop\sROP_Variables.f90"/></Filter>
+		<Filter Name="Simulation">
+		<File RelativePath=".\Simulation\ConfigurationVariables.f90"/>
+		<File RelativePath=".\Simulation\CSounds.f90"/></Filter>
 		<Filter Name="TorqueDrag">
 		<Filter Name="TD_DrillingSubs">
 		<File RelativePath=".\TorqueDrag\TD_DrillingSubs\MeshGeneration_FluidModule.f90"/>

TorqueDrag/TD_ReadDataSubroutines/TD_DrillStemReadData.f90

@@ -1,11 +1,11 @@
 subroutine TD_DrillStemReadData
-    
+    use ConfigurationVariables
-   Use CStringConfigurationVariables
+    Use CStringConfigurationVariables
-   Use TD_DrillStemComponents
+    Use TD_DrillStemComponents
-   Use TD_WellElements
+    Use TD_WellElements
-   Use TD_WellGeometry
+    Use TD_WellGeometry
-   Use TD_StringConnectionData
+    Use TD_StringConnectionData
-   Use Drawworks_VARIABLES, only: Drawworks
+    Use Drawworks_VARIABLES, only: Drawworks
    
 
    implicit none 
@@ -22,7 +22,7 @@ subroutine TD_DrillStemReadData
 !====================================================
 !         Set Drill Stem Components Data
 !====================================================
-   TD_String%StringConfigurationCount = StringConfiguration%StringConfigurationCount
+   TD_String%StringConfigurationCount = Configuration%StringConfiguration%StringConfigurationCount
    TD_String%DrillStemComponentsNumbs = 0
    
    
@@ -42,16 +42,16 @@ subroutine TD_DrillStemReadData
    
    
    Do i=1, TD_String%StringConfigurationCount
-     TD_DrillStem(i)%ComponentType   = StringConfiguration%StringConfigurations(i)%ComponentType        
+     TD_DrillStem(i)%ComponentType   = Configuration%StringConfiguration%StringConfigurations(i)%ComponentType        
-     TD_DrillStem(i)%Numbs           = StringConfiguration%StringConfigurations(i)%NumberOfJoint
+     TD_DrillStem(i)%Numbs           = Configuration%StringConfiguration%StringConfigurations(i)%NumberOfJoint
-     TD_DrillStem(i)%Id              = StringConfiguration%StringConfigurations(i)%NominalId/12.d0   ![ft]
+     TD_DrillStem(i)%Id              = Configuration%StringConfiguration%StringConfigurations(i)%NominalId/12.d0   ![ft]
-     TD_DrillStem(i)%Od              = StringConfiguration%StringConfigurations(i)%NominalOd/12.d0   ![ft]
+     TD_DrillStem(i)%Od              = Configuration%StringConfiguration%StringConfigurations(i)%NominalOd/12.d0   ![ft]
-     TD_DrillStem(i)%Length          = StringConfiguration%StringConfigurations(i)%LengthPerJoint    ![ft]
+     TD_DrillStem(i)%Length          = Configuration%StringConfiguration%StringConfigurations(i)%LengthPerJoint    ![ft]
-     TD_DrillStem(i)%WeightperLength = StringConfiguration%StringConfigurations(i)%WeightPerLength   ![lb/ft]
+     TD_DrillStem(i)%WeightperLength = Configuration%StringConfiguration%StringConfigurations(i)%WeightPerLength   ![lb/ft]
-     TD_DrillStem(i)%TotalLength     = StringConfiguration%StringConfigurations(i)%ComponentLength
+     TD_DrillStem(i)%TotalLength     = Configuration%StringConfiguration%StringConfigurations(i)%ComponentLength
      TD_DrillStem(i)%TotalWeight     = TD_DrillStem(i)%TotalLength*TD_DrillStem(i)%WeightperLength
      
-     TD_String%DrillStemComponentsNumbs     = TD_String%DrillStemComponentsNumbs+StringConfiguration%StringConfigurations(i)%NumberOfJoint
+     TD_String%DrillStemComponentsNumbs     = TD_String%DrillStemComponentsNumbs+Configuration%StringConfiguration%StringConfigurations(i)%NumberOfJoint
      
     !!=========> Set Separated Drill Stem Components Data
     !     TD_LastIndex = TD_LastIndex+StringConfigurations(i)%NumberOfJoint
@@ -98,7 +98,7 @@ subroutine TD_DrillStemReadData
    
    Do i=1, TD_String%StringConfigurationCount
      
-     TD_LastIndex = TD_LastIndex+StringConfiguration%StringConfigurations(i)%NumberOfJoint
+     TD_LastIndex = TD_LastIndex+Configuration%StringConfiguration%StringConfigurations(i)%NumberOfJoint
      
      TD_DrillStems(TD_FirstIndex:TD_LastIndex)%ComponentType  = TD_DrillStem(i)%ComponentType        
      TD_DrillStems(TD_FirstIndex:TD_LastIndex)%Id             = TD_DrillStem(i)%Id

TorqueDrag/TD_ReadDataSubroutines/TD_WellElementsReadData.f90

@@ -2,6 +2,7 @@ subroutine TD_WellElementsReadData
     
    Use CCasingLinerChokeVariables
    use CStringConfigurationVariables
+   use ConfigurationVariables
    Use TD_WellElements
    Use TD_WellGeometry
 
@@ -121,7 +122,7 @@ subroutine TD_WellElementsReadData
            TD_ROPHole(i)%TopDepth   = TD_WellGeo(TD_WellGeneral%WellIntervalsCount)%TopDepth
            TD_ROPHole(i)%DownDepth  = TD_WellGeo(TD_WellGeneral%WellIntervalsCount)%DownDepth
            TD_ROPHole(i)%Length     = TD_WellGeo(TD_WellGeneral%WellIntervalsCount)%IntervalLength
-           TD_ROPHole(i)%Id         = StringConfiguration%BitDefinition%BitSize/12.d0      ! unit: [ft]
+           TD_ROPHole(i)%Id         = Configuration%StringConfiguration%BitDefinition%BitSize/12.d0      ! unit: [ft]
        End Do