SimulationCore2/Equipments/BopStack/KILL_LINE.f90

 

SUBROUTINE KILL_LINE
    USE VARIABLES
    USE CAccumulatorVariables
    USE CBopStackVariables
    USE CBopControlPanelVariables
    USE CEquipmentsConstants
    USE CSimulationVariables
    
    implicit none
     
    
!=====================================================================
!                 KILL LINE 1- BOP CAMERON Type U 5000
!                   START CONDITIONS FOR KILL LINE 1
!=====================================================================  
    
      RAM(6)%SuccessionCounter = RAM(6)%SuccessionCounter + 1 
      
      
       if (BopControlPanel%KillLineValve == -1.0 .and. RigAirMalf==0 .and. BopControlPanel%AirMasterValve==1 .and. p_acc>acc_MinPressure) then
           
        if ( RAM(6)%SuccessionCounter /= RAM(6)%SuccessionCounterOld+1 ) then
            RAM(6)%SuccessionCounter = 0   ! also in starup
            RAM(6)%SuccessionCounterOld = 0   ! also in starup
            return   
        else
            RAM(6)%SuccessionCounterOld= RAM(6)%SuccessionCounter        
        endif
        
        
        if ( RAM(6)%SuccessionCounter < int(2.5/DeltaT_BOP) ) then
            return
        endif
           
           RAM(6)%First_CloseTimecheck= 1              
           
           
           
         if (KillLineOpenLedMine == LedOn) then 
             RETURN            
         end if
            KillLine_closed=0
            RAM(6)%vdis_tot=0
            RAM(6)%vdis_bottles=0.
            RAM(6)%fvr_air=0.
            RAM(6)%vdis_elecp=0.
            Qiter=7
            RAM(6)%Qzero=70
            RAM(6)%Q=RAM(6)%Qzero
            RAM(6)%flow=70
            RAM(6)%tol=0.0037
            if (finished_KillLine==1) then
               KillLineLeverOld= 1.0
           else
               KillLineLeverOld=BopControlPanel%KillLineValve
           endif
           finished_KillLine=0
            KillLineIsOpening = .true.
            BopControlPanel%KillLineCloseLED = LedOff
            KillLineCloseLedMine = LedOff
            BopControlPanel%KillLineOpenLED = LedOn    !LedBlinking
            RAM(6)%bop_type = 3
            !AbopKillLine=196.67
            AbopKillLine=(BopStackSpecification%KillClose*231)/((IDKillLineBase-ODDrillpipe_inKillLineBase)/2.)
            NeededVolumeKillLine=AbopKillLine*(IDKillLineBase-max(ODDrillpipe_inKillLine,ODDrillpipe_inKillLineBase))/(2.*231)  !1.5 galon for each BOP
        endif
       
        if (BopControlPanel%KillLineValve == 1.0 .and. RigAirMalf==0 .and. BopControlPanel%AirMasterValve==1 .and. p_acc>acc_MinPressure) then
            
            
            if ( RAM(6)%SuccessionCounter /= RAM(6)%SuccessionCounterOld+1 ) then
                RAM(6)%SuccessionCounter = 0   ! also in starup
                RAM(6)%SuccessionCounterOld = 0   ! also in starup
                return   
            else
                RAM(6)%SuccessionCounterOld= RAM(6)%SuccessionCounter
            endif
        
        
            if ( RAM(6)%SuccessionCounter < int(2.5/DeltaT_BOP) ) then
                return
            endif
               
               RAM(6)%First_OpenTimecheck= 1             
            
            
            
         if (KillLineCloseLedMine == LedOn) then 
             RETURN            
         end if
            KillLine_closed=0
            RAM(6)%vdis_tot=0
            RAM(6)%vdis_bottles=0.
            RAM(6)%fvr_air=0.
            RAM(6)%vdis_elecp=0.
            Qiter=7
            RAM(6)%Qzero=70
            RAM(6)%Q=RAM(6)%Qzero
            RAM(6)%flow=70
            RAM(6)%tol=0.0037
            
            

                if (finished_KillLine==1) then
                    KillLineLeverOld= -1.0
                else
                    KillLineLeverOld=BopControlPanel%KillLineValve
                endif
            finished_KillLine=0
            KillLineIsClosing = .true.

        
         !if (KillLineCloseLed == LedOn) then 
         !    RETURN            
         !end if
         
            BopControlPanel%KillLineCloseLED = LedOff    !new
            KillLineCloseLedMine = LedOff    !new             
            
            BopControlPanel%KillLineCloseLED = LedOn    !LedBlinking
            RAM(6)%bop_type = 3
            !AbopKillLine=196.67
            AbopKillLine=(BopStackSpecification%KillOpen*231)/((IDKillLineBase-ODDrillpipe_inKillLineBase)/2.)
            NeededVolumeKillLine=AbopKillLine*(IDKillLineBase-max(ODDrillpipe_inKillLine,ODDrillpipe_inKillLineBase))/(2.*231)  !1.5 galon for each BOP
        endif
        
!==========================================================================      
    
if (KillLineIsOpening .or. KillLineIsClosing) then
        CALL KILL_LINE_SUB
end if    
    
    
    END SUBROUTINE KILL_LINE
    
    
    
    
    
    
    
    
    
    
    
SUBROUTINE KILL_LINE_SUB   
    
    USE VARIABLES
    USE CAccumulatorVariables
    USE CBopStackVariables
    USE CBopControlPanelVariables
    USE CEquipmentsConstants
    USE CSimulationVariables

    implicit none
    
    
    FirstSet= 0
    RamsFirstSet= 0
    
    loop6: do while (finished_KillLine==0)
        
        
            RAM(6)%SuccessionCounter = RAM(6)%SuccessionCounter + 1
       
        
        
           if (BopControlPanel%KillLineValve == 1.0 .and. KillLineLeverOld == -1.0 .and. RigAirMalf==0 .and. BopControlPanel%AirMasterValve==1 .and. p_acc>acc_MinPressure) then
               
                if ( RAM(6)%First_CloseTimecheck == 0 ) then 
                    
                    
                    if ( RAM(6)%SuccessionCounter /= RAM(6)%SuccessionCounterOld+1 ) then
                        RAM(6)%SuccessionCounter = 0   ! also in starup
                        RAM(6)%SuccessionCounterOld = 0   ! also in starup
                        return   
                    else
                        RAM(6)%SuccessionCounterOld= RAM(6)%SuccessionCounter        
                    endif
        

        
                    if ( RAM(6)%SuccessionCounter < int(2.5/DeltaT_BOP) ) then
                        return
                    endif
           
                endif               
               
               
               
            KillLine_closed=0
            RAM(6)%p_bop=pa
            KillLineLeverOld = BopControlPanel%KillLineValve
            BopControlPanel%KillLineOpenLED = LedOff
            KillLineOpenLedMine = LedOff
            BopControlPanel%KillLineCloseLED = LedOn    !LedBlinking
            CALL OpenKillLine
            RAM(6)%bop_type = 3
            !AbopKillLine=196.67
            AbopKillLine=(BopStackSpecification%KillClose*231)/((IDKillLineBase-ODDrillpipe_inKillLineBase)/2.)
            NeededVolumeKillLine=AbopKillLine*(IDKillLine-max(ODDrillpipe_inKillLine,ODDrillpipe_inKillLineBase))/(2.*231)
            
            RAM(6)%vdis_bottles=0.
            RAM(6)%fvr_air=0.
            RAM(6)%vdis_elecp=0.
            KillLineIsClosing = .true.
            KillLineIsOpening = .false.
        endif
        
        if (BopControlPanel%KillLineValve == -1.0 .and. KillLineLeverOld == 1.0 .and. p_acc>acc_MinPressure .and. RigAirMalf==0 .and. BopControlPanel%AirMasterValve==1) then 
            
            
                if ( RAM(6)%First_OpenTimecheck == 0 ) then

                    if ( RAM(6)%SuccessionCounter /= RAM(6)%SuccessionCounterOld+1 ) then
                        RAM(6)%SuccessionCounter = 0   ! also in starup
                        RAM(6)%SuccessionCounterOld = 0   ! also in starup
                        return   
                    else
                        RAM(6)%SuccessionCounterOld= RAM(6)%SuccessionCounter        
                    endif
        
                    if ( RAM(6)%SuccessionCounter < int(2.5/DeltaT_BOP) ) then
                        return
                    endif
           
                endif            
            
            
            KillLine_closed=0
            RAM(6)%p_bop=pa
            KillLineLeverOld = BopControlPanel%KillLineValve
            BopControlPanel%KillLineCloseLED = LedOff
            KillLineCloseLedMine = LedOff
            BopControlPanel%KillLineOpenLED = LedOn    !LedBlinking
            CALL OpenKillLine
            RAM(6)%bop_type = 3
            !AbopKillLine=196.67
            AbopKillLine=(BopStackSpecification%KillOpen*231)/((IDKillLineBase-ODDrillpipe_inKillLineBase)/2.)
            NeededVolumeKillLine=AbopKillLine*(IDKillLineBase-IDKillLine)/(2.*231)
            RAM(6)%vdis_bottles=0.
            RAM(6)%fvr_air=0.
            RAM(6)%vdis_elecp=0.

            KillLineIsOpening = .true.
            KillLineIsClosing = .false.
            endif

        
            RAM(6)%First_CloseTimecheck = 0
            RAM(6)%First_OpenTimecheck = 0
 
 
     RAM(6)%time=RAM(6)%time+DeltaT_BOP  !overal time (s)

 

!===================================================
!                        BOP 
!===================================================
if (KillLine_closed==0) then    !bop closing
     call bop_code(5,H_KillLineBop,6)   !ramtype=5      6=RNUMBER
endif    !bop is closing
!================================================================
if (KillLine_closed==1) then
    RAM(6)%Q=0
    !p_bop=pram_reg
    RAM(6)%p_bop=pa
    RAMS%minloss(6,17)=0.       !RNUMBER=6
endif

RAM(6)%timecounter_ram=RAM(6)%timecounter_ram+1





!        MiddleRamsStatus = IDshearBop
!        UpperRamsStatus = IDPipeRam1
!        LowerRamsStatus = IDPipeRam2
!        AnnularStatus = IDAnnular
!        AccumulatorPressureGauge = p_acc
!        ManifoldPressureGauge= pram_reg
!        AnnularPressureGauge=Pannular_reg
!
!        
!
!         WRITE(60,60) RAM(6)%time,RAM(6)%Q,RAM(6)%vdis_tot,p_acc, &
!         pram_reg,Pannular_reg,RAM(6)%p_bop,IDshearBop, &
!         IDPipeRam1,IDPipeRam2,IDAnnular
!60       FORMAT(11(f18.5))
         
         
          call sleepqq(100)
          
if (KillLine_closed==1) then
 !   if ((UpperRamsValve==1. .and. UpperRamsFailureMalf==0) .or. (UpperRamsValve==-1.0 .and. UpperRamsFailureMalf==0) .or. (MiddleRamsValve==1. .and. MiddleRamsFailureMalf==0) .or. (MiddleRamsValve==-1.0 .and. MiddleRamsFailureMalf==0) .or. (LowerRamsValve==1. .and. LowerRamsFailureMalf==0) .or. (LowerRamsValve==-1.0 .and. LowerRamsFailureMalf==0) .or. (AnnularValve==1. .and. AnnularFailureMalf==0) .or. (AnnularValve==-1.0 .and. AnnularFailureMalf==0) .or. ChokeLineValve==1. .or. ChokeLineValve==-1.0) then
        finished_KillLine=1
 !   endif
endif          
          
          if (IsStopped == .true.) return 
          
    end do  loop6   !while finished_KillLine==0
    
END SUBROUTINE KILL_LINE_SUB