SimulationCore2/Equipments/BopStack/BOPstartup.f90

SUBROUTINE BOP_StartUp()
USE VARIABLES
USE CAccumulatorVariables
USE CBopStackVariables
USE CBopControlPanelVariables
USE CEquipmentsConstants
implicit none   

integer i
    
    
!UpperRamsFailureMalf=0   
!AnnularFailureMalf=0    
!LowerRamsFailureMalf=0
!MiddleRamsFailureMalf=0
!UpperRamsLeakMalf=0
!LowerRamsLeakMalf=0
!MiddleRamsLeakMalf=0
!AnnularLeakMalf=0
!AccPupmsFailMalf=0
!AirSupplyPressureGauge=0
!======================= SETTING VARIABLES

BopStackInput%BOP_timeCounter= 0

!============== FOR MANIFOLD VALVES CODE=====================
CALL OpenAnnular
CALL OpenUpperRams
CALL OpenMiddleRams
CALL CloseKillLine
CALL CloseChokeLine
CALL OpenLowerRams

Annular%Annular_Situation_forTD= 0       ! open - for TD code
RamLine%ShearBop_Situation_forTD= 0       ! open - for TD code
PipeRam1%Situation_forTD= 0       ! open - for TD code
PipeRam2%Situation_forTD= 0       ! open - for TD code
!======================================================================

CALL LOSS_INPUTS()
!
!OPEN(50,FILE='AIRPUMP_OUTPUTS.DAT')
!OPEN(60,FILE='RAMS_OUTPUTS.DAT')
!======================================================================
!                            GET INPUTS  
!======================================================================

RAM%SuccessionCounter = 0
RAM%SuccessionCounterOld = 0

RAM%First_CloseTimecheck= 0
RAM%First_OpenTimecheck= 0



BopStackAcc%Cumulative_AirVolume= 0.0


BopStackAcc%BOTTLE_CAPACITY=10 !(GALON)
BopStackAcc%NOBOTTLES=Accumulator%NumberOfBottels







!fvr_tot=40      !(GALON)  IN CHARGED POSITION
BopStackAcc%PRAMS_REGSET=1500       !RamsReglatorSet       !=1500 DEFAULT regulator set pressure (PSI)
BopStackAcc%acc_ChargedPressure=3000   !charged(PSI)
BopStackAcc%acc_MinPressure=Accumulator%AccumulatorMinimumOperatingPressure        !1200      !discharged(PSI)
!acc_precharge=1000


BopStackAcc%FVR_TOT=(-2451*(BopStackAcc%acc_ChargedPressure**(-0.8202))+8.435)*BopStackAcc%NOBOTTLES    ! IT IS WRRITEN FOR PRECHARGE 1000 PSI FROM ITS CURVE

!write(*,*) 'fvr_tot=',fvr_tot

!ELECTRIC_PUMPON=2800
Pumps%ELECTRIC_ON=Accumulator%StartPressure
!ELECTRIC_PUMPOFF=acc_ChargedPressure    !=3000 psi
Pumps%ELECTRIC_OFF=Accumulator%StopPressure
!QELECTRIC_PUMP=12   !(gpm)
Pumps%QELECTRIC=Accumulator%ElectricPumpOutput



!AIR_PUMPON=2600
Pumps%AIR_ON=Accumulator%StartPressure2
!AIR_PUMPOFF=2900
Pumps%AIR_OFF=Accumulator%StopPressure2



RAM%tol=0.0037  !%=(2700-2600)/2700
RAM%tolzero=RAM%tol

Annular%tolAnnular=0.0018   !=(2900-2895)/2900
Annular%tolzeroAnnular=Annular%tolAnnular
!======================OTHER INPUTS(CONSTANTS)===========================
ShearRam%PA=300      !(PSI)
ShearRam%P_SHEAR=1200  !(PSI)
!p_shear=2423.1  !(PSI)
ShearRam%PB=ShearRam%P_SHEAR-ShearRam%PA
AnnularComputational%pa_annular=100 !(psi)

  


Annular%IDAnnularBase=13.625        !(inch)
Annular%IDAnnular=Annular%IDAnnularBase
Annular%ODDrillpipe_inAnnularBase=5.        ! so 18 gal is for complete closing of annular
Annular%ODDrillpipe_inAnnular=5.     ! initial
AnnularComputational%AnnularMovingPressure=360. !(psi)
ShearRam%IDAnnularFinal= Annular%IDAnnular


ShearRam%IDshearBopBase=13.625        !(inch)
ShearRam%IDshearBop=ShearRam%IDshearBopBase
ShearRam%ODDrillpipe_inShearRamBase=5     !initial
ShearRam%ODDrillpipe_inShearRam=5     !initial
ShearRam%IDshearBopFinal= ShearRam%IDshearBop

PipeRam1%IDBase=13.625        !(inch)
PipeRam1%ID=PipeRam1%IDBase
PipeRam1%ODDrillpipe_inBase=5     !initial
PipeRam1%ODDrillpipe_in=5     !initial
ShearRam%IDPipeRam1Final= PipeRam1%ID


PipeRam2%ID=PipeRam1%IDBase        !(inch)
PipeRam2%ODDrillpipe_inBase=5     !initial
PipeRam2%ODDrillpipe_in=5     !initial
ShearRam%IDPipeRam2Final= PipeRam2%ID

ChokeLine%IDBase=8.6        !(inch)
ChokeLine%ID=ChokeLine%IDBase
ChokeLine%ODDrillpipe_inBase=5
ChokeLine%ODDrillpipe_in=5

KillLine%IDBase=8.6        !(inch)
KillLine%ID=KillLine%IDBase
KillLine%ODDrillpipe_inBase=5
KillLine%ODDrillpipe_in=5


!va=4   !(liter)
!vb=8  !(liter)

!cv=2;  !flow coefficinet of regulator

ShearRam%RAM_COURSE=320.2   !milimeter
ShearRam%H_REGRAM=0 !(m)<<<<<<<<<<<<<<<<<<<<<<<<
ShearRam%H_ShearRamBop=(BopStackSpecification%GroundLevel-BopStackSpecification%BlindRamHeight)*0.3048   ! foot to meter
PipeRam1%H=(BopStackSpecification%GroundLevel-BopStackSpecification%UpperRamHeight)*0.3048   ! foot to meter
PipeRam2%H_Bop=(BopStackSpecification%GroundLevel-BopStackSpecification%LowerRamHeight)*0.3048   ! foot to meter
Annular%H_AnnularBop=(BopStackSpecification%GroundLevel-BopStackSpecification%AnnularPreventerHeight)*0.3048   ! foot to meter
ChokeLine%H_Bop=(BopStackSpecification%GroundLevel-BopStackSpecification%KillHeight)*0.3048   ! foot to meter
KillLine%H_Bop=(BopStackSpecification%GroundLevel-BopStackSpecification%KillHeight)*0.3048   ! foot to meter


RamLine%P_ACC=BopStackAcc%acc_ChargedPressure
RAM%vdis_bottles=0   !initial discharged volume
RamLine%FVR=BopStackAcc%FVR_TOT
RAMS%minloss=0.

!======================AIRPUMP INPUTS(CONSTANTS)===========================

RAM%FVR_AIR=0
Pumps%P_AIRP=0

RamLine%BA1=1003; RamLine%BA2=.03375; RamLine%BA3=4.014; RamLine%BA4=.2458
RamLine%BBA1 =31.8; RamLine%BBA2 =-725.7 ; RamLine%BBA3 =4154

Pumps%Qiter=7  !(gpm)

! Q=0.0003585; true


RamLine%DeltaT_BOP=0.1 !second
Pumps%TOL_AIR=.08

Pumps%alpha_Qair=0
Pumps%alpha_timeair=0
Pumps%alpha_paccair=RamLine%P_ACC
Pumps%alpha_pairp=RamLine%P_ACC
Pumps%alpha_diffpair=0
Pumps%alpha_lossesair=0
Pumps%alpha_fvrair=0

RamLine%counter_airp=1

!======================BOP INPUTS(CONSTANTS)===========================

    if (Accumulator%PrechargePressure == 1400.) then
        RamLine%B1=1396; RamLine%B2=0.17; RamLine%B3=3.873; RamLine%B4=1.101
    elseif (Accumulator%PrechargePressure == 2000.) then
        RamLine%B1=1980; RamLine%B2=0.1237; RamLine%B3=15.69; RamLine%B4=1.029
    elseif (Accumulator%PrechargePressure == 600.) then
        RamLine%B1=591.9; RamLine%B2=0.1968; RamLine%B3=2.887; RamLine%B4=0.9757
    else !(PrechargePressure == 1000.) then  ! this is for precharge=1000 psi
        RamLine%B1=993.7; RamLine%B2=0.164; RamLine%B3=5.492; RamLine%B4=0.9796 
    endif
    
BopStackAcc%ByPassOld= 1.0

RAM%p_bop=ShearRam%PA
AnnularComputational%p_annular=AnnularComputational%pa_annular
!Q=0.0055;  !initial flow rate (m^3/s)
RAM%flow=60  !(gpm) initial value
RAM%Qzero=70    !for DP code, increasing Q after shear
RAM%vdis_tot=0
RamLine%AIRP_SWITCH=0 !off position
RamLine%ELECP_SWITCH=0  !off position
RamLine%ShearBop_closed=1
PipeRam1%closed=1
PipeRam2%closed=1
ChokeLine%closed=1
KillLine%closed=1
Annular%Annular_closed=1
RamLine%FINISHED_shear=0
PipeRam1%finished=0
PipeRam2%finished=0
ChokeLine%finished=0
KillLine%finished=0
Annular%finished_Annular=0
Pumps%DELTAV_ELECP=0
RAM%vdis_elecp=0
!==================================================================
RAM%timecounter_ram=0
RAM%Q=0
BopStackAcc%pram_reg=BopStackAcc%PRAMS_REGSET   !psi       !RamsReglatorSet
Annular%Pannular_reg=min(BopControlPanel%AnnularRegulatorSetControl,1700.)




BopControlPanel%MiddleRamsStatus= ShearRam%IDshearBop
BopControlPanel%UpperRamsStatus= PipeRam1%ID
BopControlPanel%LowerRamsStatus= PipeRam2%ID
BopControlPanel%AnnularStatus = Annular%IDAnnular


BopControlPanel%AccumulatorPressureGauge = RamLine%P_ACC


RAM%time=0

!         WRITE(60,10) '  Overal Time','Q Ram Line','Vdis Ram Line','P Accumulator','Preg Ram Line','Preg Annular','   P BOP','ID Shear Ram', &
!             'ID Pipe Ram1','ID Pipe Ram2','ID Annular'
!10       FORMAT(11(A18))
!
!
!
!         WRITE(60,60) RAM(2)%time,RAM(2)%Q,RAM(2)%vdis_tot,p_acc, &
!         pram_reg,Pannular_reg,RAM(2)%p_bop,IDshearBop, &
!         IDPipeRam1,IDPipeRam2,IDAnnular
!60       FORMAT(11(f18.5))


      BopControlPanel%MiddleRamsOpenLED = LedOn
      BopStackInput%MiddleRamsOpenLEDMine = LedOn
      BopControlPanel%MiddleRamsCloseLED = LedOff
      BopStackInput%MiddleRamsCloseLEDMine = LedOff
         RamLine%ShearRamIsOpening = .false.
         RamLine%ShearRamIsClosing = .false.

      BopControlPanel%UpperRamsOpenLED = LedOn
      BopStackInput%UpperRamsOpenLEDMine = LedOn
      BopControlPanel%UpperRamsCloseLED = LedOff
      BopStackInput%UpperRamsCloseLEDMine = LedOff
         PipeRam1%IsOpening = .false.
         PipeRam1%IsClosing = .false.         
         
      BopControlPanel%LowerRamsOpenLED = LedOn
      BopStackInput%LowerRamsOpenLEDMine = LedOn
      BopControlPanel%LowerRamsCloseLED = LedOff
      BopStackInput%LowerRamsCloseLEDMine = LedOff
         PipeRam2%IsOpening = .false.
         PipeRam2%IsClosing = .false.  
         
      BopControlPanel%ChokeLineOpenLED = LedOff
      BopStackInput%ChokeLineOpenLEDMine = LedOff
      BopControlPanel%ChokeLineCloseLED = LedOn
      BopStackInput%ChokeLineCloseLEDMine = LedOn
         ChokeLine%IsOpening = .false.
         ChokeLine%IsClosing = .false. 
         
         
      BopControlPanel%KillLineOpenLED = LedOff
      BopStackInput%KillLineOpenLedMine = LedOff
      BopControlPanel%KillLineCloseLED = LedOn
      BopStackInput%KillLineCloseLedMine = LedOn
         KillLine%IsOpening = .false.
         KillLine%IsClosing = .false.         
         
         
      BopControlPanel%AnnularOpenLED = LedOn
      BopStackInput%AnnularOpenLedMine = LedOn
      
      BopControlPanel%AnnularCloseLED = LedOff
      BopStackInput%AnnularCloseLedMine = LedOff
      
         Annular%AnnularIsOpening = .false.
         Annular%AnnularIsClosing = .false.  
           
         
         Annular%FirstSet=1
         AnnularComputational%RamsFirstSet=1
         BopControlPanel%ManifoldPressureGauge=BopStackAcc%PRAMS_REGSET        !RamsReglatorSet         
         BopControlPanel%AnnularPressureGauge= (1 - Annular%AnnularPressureGaugeMalf) * min(BopControlPanel%AnnularRegulatorSetControl,1700.)
         
         
AnnularComputational%PannularTimeStepDelay = int(1./RamLine%DeltaT_BOP)       ! 1/0.1 : for 1 sec delay in AnnRegulator shot time

    DO i = 1 , AnnularComputational%PannularTimeStepDelay
        CALL AnnularComputational%Pannular_regDelay%AddToFirst(BopControlPanel%AnnularPressureGauge)
    END DO         
         
         
         
    end